• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is a fantastic option for modern homes. They are easy to maintain, durable and long-lasting. They don't rot or timber rust like aluminum and timber.

It is important to clean and oil UPVC doors and windows on a regular basis. This will prevent unnecessary repair costs and increase energy efficiency.

1. Broken Glass

The broken glass in your windows can cause significant damage to your home, and could even be fatal. You should take the time to make sure that your windows are in good shape.

Single-pane windows are relatively easy to replace and generally fit into old frames very easily. If windows with double panes are held together by internal beading, it is difficult to remove and replace the old panes. In this case, you will need to locate some plastic spacers that assist the new pane to fit properly into the frame of the window.

If you plan to attempt to remove the window panes by yourself it is important to wear appropriate safety gear, including thick gloves and protective eyewear. You should also lay down a dropcloth before you begin working on the window panes to ensure that any shards fall onto the fabric and not onto the floor, where they could be trampled under.

Once the glass has been removed, it's a good idea to cover the gap with packaging tape or duct tape to stop drafts and water from entering the home until a professional comes out and repair the window. It also acts as a barrier, deterring any intruders from getting access to your home. If the distance between the door and the window is substantial, you may need to consider an alarm system that includes windows. This will provide the best of both.

2. Sagging

uPVC is durable, energy-efficient and affordable alternative to timber sash window. In time, they could be affected by a variety of issues, timber including sagging. A sagging window can cause problems with light, draughts, and even security. If you notice that your upvc window repair near me window is beginning to shrink, it's important to act quickly to prevent the problem from worsening.

Repositioning the hinges can help fix a window that is sliding. To accomplish this, you'll need to open the window to access the frame. You can then unscrew both the hinges at the top and bottom using a screwdriver, and then adjust the hinges clockwise or counter-clockwise. Close your window to check the fit after you've repositioned your hinges. If you're satisfied with the fit, tighten the screws until they stay in position.

If you are unable to reposition the hinges, you might need to replace the seal. Rubber seals may dry out and lose their elasticity over time, leading them to loose their elasticity. If this happens, it's crucial to replace the seal as fast as possible to ensure your uPVC windows are waterproof and draught-proof.

uPVC handles may also loosen. This is often caused by screws that have been removed over time, but it can also be due to the handle mechanism wears out. Luckily, it's not difficult to fix a loose uPVC window handle yourself. First, you'll need to shut the window and perform an initial fitting. The corner joints of the sash should be aligned with the casing joint. If it doesn't you can use a screwdriver to loosen the handle. Then turn the mechanism into position.

3. Water Leaks

If you awake to damp floors and mouldy walls every time it rains it's important to take action. The leaks of water through windows could cause structural damage to your home and affect your ability to regulate the temperature inside your home. The most common reason for leaks in uPVC windows is that the sealant around the frame is either damaged or is missing.

It is a fairly easy fix that can be completed by any competent DIYer. Depending on the severity of the problem the caulking that was used up may require removal before a new layer can be applied. When it comes to uPVC repair, it is important to avoid 'over-caulking'. This will only make your window more difficult to clean and reduce its energy efficiency.

Verify that the drainage holes are free of debris inside them and ensure that the sill pan has been angled correctly to drain away from the window. In more serious situations, you may have to replace the window.

Other signs of long-term water leakage include rotted sills and the appearance of black spots of mold on the walls near the window. This is a fungus that thrives in damp conditions and is able to quickly spread throughout the home.

If the leakage is occurring between the double-glazed glass it is more likely the problem is with the seal than the frame. A uPVC specialist can fix this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges may be to blame if your uPVC window is difficult to open or if it opens with an ease. Anyone who is a skilled DIYer can fix these in a matter of minutes.

Almost every household in the UK will have either top hung or side-hung uPVC windows that have hinges and, just like any mechanical component they are susceptible to wear and tear over time. It's very simple to replace a hinge on a window however it is simpler if you have someone to help you hold the frame.

It is also important to ensure that the uPVC hinges are opening and closed in the right direction. This can be done by looking for the arrows on each hinge. This indicates which way the window should be opened.

The issue could be caused either by opening the window incorrectly or by a poor installation in the factory. Sending us photos through our website can often solve the issue. We are always happy to give suggestions.

Regularly lubricating hinges is also essential. This can be accomplished by applying a light engineering oil on the hinges. We suggest using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regular lubrication can allow the window repair to operate and close more smoothly. It can also prevent corrosion and reduce the risk of sticking. Ideally, you should do this at least once a year. WD40 or other solvent-based oils should not be used as they can cause damage to your uPVC windows.

5. Draughts

Draughts in Upvc windows can be caused by different things. The hinges can also become disaligned as a result of wear, creating a gap where the sash meets frame. This can be easily repaired by giving them a good cleaning, but when they're beyond repair, it could be necessary to get them aligned or replaced. Second, the interlock can be disaligned. It is located on the hinge's side, and may need to be cleaned. In some cases, it may be necessary to replace the hinges.

The next most common reason for draughts are the window seals, these can become worn down or damaged over time, and will allow air to escape through these gaps. This can be avoided by replacing them with high-quality weatherstripping. Another option is to replace the window with low-emissivity glass. this will help to regulate indoor temperatures and will reduce draughts.

The final method to cut down on draughts effectively is by using a Draught-exclusion device. These are usually made of fabric tubes filled with a filler which can be put on top of your window sill. They can keep your home warm by blocking cold air.

With a bit of regular maintenance and repair your windows made of upvc will provide excellent security and insulation for your home. It is essential to remember that all windows eventually get worn out and it could be more cost-effective to replace them rather than repair them. So, if you're experiencing issues with your Upvc windows, it's recommended to seek help from a professional as soon as you can.