• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is an excellent option for modern homes. They are long-lasting, durable and easy to maintain. Unlike timber and aluminium, they don't rust or rot.

It is essential to clean and oil UPVC windows and doors on a regular basis. This will reduce costly repairs and improve energy efficiency.

1. Broken Glass

The broken glass in your windows can cause serious damage to your home, and could even be fatal. It is crucial to take the time to ensure that you're doing everything you can to ensure that your windows are in good shape.

Single-pane windows are relatively simple to replace and typically fit into frames that were previously in use very easily. If you have double-paned windows that are joined by internal beading, it will be more difficult to remove and replace the panes that were previously in use. In this case, it is necessary to purchase plastic spacers in order to help the new pane fit into the window frame.

Wearing eye protection and heavy gloves is essential if you plan to remove the glass by yourself. It is also recommended to lay down a dropcloth before you begin working on the window panes, so that any shards fall onto the fabric, not onto the floor which could cause them to be trampled under.

It's a great idea to seal the gap after the glass has been removed. This will stop drafts and water from getting into your property until a professional is able to fix the window. It also acts as a barrier, preventing any intruders from gaining entry to your home. If the gap between the door and the window is significant, you may prefer a security screen that also includes windows. This will provide the best of both.

2. Sagging

Upvc windows and doors are a cost-effective energy-efficient, durable and long-lasting alternative to timber windows made of sash. As time passes, they may be affected by a variety of issues that include sliding. A sagging uPVC windows could cause issues with light, draughts and even security. It is crucial to act when you notice your uPVC windows are sagging.

To fix a sagging window you can try to reposition the hinges. To accomplish this, you'll need open the window to access the frame. Then, remove both the top and bottom hinges with a screwdriver and adjust them clockwise or counter-clockwise. After you've repositioned the hinges, shut your window and check for fit. If you are happy with the fit of your window, tighten the screws to keep them in place.

If you can't reposition the hinges you may need to replace the seal. Rubber seals can dry out and lose their elasticity over time, leading them to loose their elasticity. If this happens, it's important to replace the seal as quickly as you can to ensure that your uPVC windows are waterproof and draught-proof.

UPVC handles can also become loose. Most often this is due to screws that have come loose over time. However, it could be due to the fact that the handle mechanism has been worn out. Luckily, it's not difficult to fix a loose uPVC window handle yourself. The first step is to close the window and then perform a test fit. The corner joints of the sash need to be aligned with the casing joint. If it doesn't, you can use the screwdriver to loosen the handle. Then, you can turn the mechanism into position.

3. Water Leaks

It is crucial to take action if awake each day to find a smoky wall and floors that are wet. The leaks of water through windows could cause structural damage to your home and affect your ability to regulate the temperature in your home. The most common cause for leaks in uPVC windows is that the sealant surrounding the frame is either damaged or missing.

This is a simple fix that can be completed by anyone who is a DIYer with the skills. Depending on the severity of the issue the caulking used previously might need to be removed before a new layer of caulk can be applied. It is crucial to remember that when it comes to uPVC window repairs, you should avoid the temptation to "over-caulk' as this will only make the area more difficult to clean and reduce your energy efficiency.

Make sure that the drainage holes do not have debris inside them and that the sill pan has been properly angled to drain away from the window. In more serious instances, you might need to consider replacing the window.

Other indicators of long-term water leakage are decayed sills and the appearance of black spots of mold on the wall near the window. This fungus thrives under humid conditions and can propagate quickly throughout the home.

It is also important to remember that if the leakage originates from the glass in your Double Glazed Window Repairs Near Me glazed windows, it is more likely to be an issue with the glass seal rather than the frame or sagging. A uPVC specialist can easily solve this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges could be at fault for the reason that your uPVC window is difficult to open or it opens with a breeze. Anyone who is a skilled DIYer can fix the hinges in a matter of minutes.

Like any mechanical component, hinges can be damaged over time. The process of replacing a hinge on a window is essentially a simple process but it can be simpler with someone else to help you hold the frame up.

It is also worth checking that the uPVC hinges are opened and closed in the correct direction. This can be done by checking for the arrows on each hinge, this shows which way the window should be opened.

The problem can be caused by opening the window incorrectly or by a poor installation in the factory. It is usually possible to fix the issue by sending us a picture via our website and we will be happy to give you suggestions.

It is also essential to grease the hinges on a regular basis. Applying a light engineering lubricant to the hinges is an ideal method to accomplish this. We recommend using a lubricant that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It can also stop corrosion and decrease the chance of sticking. The ideal time to do this once a year. WD40 or other solvent-based oils are not recommended as they can damage your uPVC windows.

5. Draughts

Draughts can be caused by a variety of different factors. Firstly the hinges, again due to wear and tear may become displaced, which will cause a gap to form where the sash joins the frame. They can be repaired by giving them good cleaning, but in the event that they are beyond repair it might be necessary to get them aligned or replaced. The interlock, which is located on the hinge side of the window, may be misaligned. Again, it is possible to just give them a thorough clean, however in some instances it could be necessary to have them replaced.

The seals may wear out or become damaged over time, allowing air escape. Replacement of these with high-quality weatherstripping will help to keep draughts at bay. Replace the windows made of upvc with low-emissivity glass. This will help regulate indoor temperatures, and reduce the risk of draughts.

Lastly, one of the most effective ways to reduce the draughts in your home is to use an draught excluder. These are usually fabric tubes that are filled with some sort of filler and can be placed on top of your windowsill. They will help block out cold air and keep your home warm and cosy!

Your windows made of upvc will keep providing excellent insulation and security in your home by performing regular maintenance and repairs. However, it is important to recognise that windows last for a certain period of time and they may reach a point where it is more efficient to replace them than repair them. If you are experiencing issues with your Upvc window it is recommended to speak with an expert as soon as possible.