• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is an excellent option for modern homes. They are easy to maintain and are durable and long-lasting. They are not susceptible to decay or rust as aluminum and timber.

It is important to clean and oil UPVC windows and doors regularly. This will help avoid unnecessary repair costs as well as increase energy efficiency.

1. Broken Glass

The damaged glass in your windows could cause severe damage to your home and even be fatal. You should take the time to ensure that your windows are in good working order.

For single pane windows, it is relatively easy to replace them, and the replacement is usually able to fit into the frame of the previous one easily. However, if you have double-pane windows that are held in place by internal beading, it will be more difficult to get rid of the panes that are in place and replace them with new ones. In this case, you will need to locate some plastic spacers that assist the new pane to fit properly into the frame of the window.

If you're planning attempt to remove the window panes by yourself, it is essential to wear appropriate safety gear, including thick gloves and protective eyewear. It is also a good idea to lay down a drop cloth before you start working on the glass to ensure that any shards will fall on the fabric rather than on the floor where they can be trampled upon and cause further damage.

It's a good idea to tape the gap once the glass is removed. This will keep drafts and water from getting into your home until a professional arrives to fix the window. This will also act as a barrier, deterring any intruders from getting access to your home. If the gap between the window and the door is substantial, you may need to consider a security screen that also has a window. This will give you the best of both.

2. Sagging

uPVC is a durable, energy-efficient and affordable alternative to timber sash window. However, over time they can suffer from a variety of issues like sliding. A sagging uPVC windows could cause issues with light, draughts and even security. If you find that your uPVC window is beginning to lose its shape, it is important to act swiftly to prevent the problem from becoming worse.

To fix a sagging window you can try to reposition the hinges. To accomplish this, you'll have to open the window to access the frame. Then, you can remove the hinges on the top and bottom with a screwdriver and adjust the hinges clockwise or counter-clockwise. Once you've adjusted the hinges, shut your window and verify the fit. If you're satisfied with the fit, tighten the screws to ensure they stay in position.

If you can't reposition the hinges you may require replacing the seal. Over time rubber seals can lose their elasticity and become dry, which causes them to lose tightness. It is essential to replace your seal as quickly as you can to ensure that your uPVC window watertight and draughtproof.

uPVC handles could also loosen. Often it is due to screws that have become loose over time. However, it can occur because the handle mechanism has worn out. It's fairly simple to fix a loose uPVC handle. First, you'll need to close the window and do a test fitting. The corners of the sash should align with the casing joint. If it isn't, you can use a screwdriver or a wrench to loosen the handle and then reverse the mechanism back into position.

3. Water Leaks

If you're waking up to wet floors and damp walls every time it rains it is important that you take action. Water leaks through windows can cause structural damage to your home and affect your ability to regulate the temperature in your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.

This is a simple fix that can be completed by anyone who is a DIYer with the skills. Depending on the severity of the issue the old caulking might need to be removed before a new layer of caulk can be applied. It is crucial to remember that when it comes to uPVC window repairs, you should avoid the temptation to "over-caulk' as this will only make the area harder to clean and can reduce your energy efficiency.

Verify that the drainage holes are free of debris inside them and that the sill pan is angled correctly to drain away from the window. In more serious situations, you may need to think about replacing the window.

Mold spots and rotted sills are another sign of water leakage. This fungus thrives under damp conditions and can spread quickly throughout the home.

If the leakage occurs between the double-glazed glass it is more likely that the issue is related to the seal, not the frame. A upvc window repair specialist can fix this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or slack and open in a breeze it could be hinges at fault. They can be easily repaired by any DIYer who is skilled and are usually completed in just a few minutes.

Nearly every home in the UK will have top-hung or side-hung uPVC windows that have hinges and, like all mechanical parts, they are susceptible to wear and tear over time. It is very easy to change a window hinge however it is simpler if you have someone to help you hold the frame.

It is also important to ensure that the uPVC hinges are opening and closed in the correct direction. This can be done by looking for the arrows on each hinge, this shows which way the window should open.

The issue could be caused by opening the window improperly or due to a poor installation at the factory. Sending us photos through our website can often resolve the problem. We are happy to give assistance.

Regularly lubricating the hinges is also necessary. Applying an engineering lubricant that is light to the hinges is a great method to accomplish this. We recommend using an oil that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can help the window operate and close more smoothly. It also decreases the risk of a window getting stuck and stop corrosion. This must be done at a minimum every year. WD40 and other solvent-based oils are not recommended because they will damage parts of your uPVC window.

5. Draughts

Draughts in Upvc windows can be caused by different factors. Firstly the hinges, again due to wear and tear could become misaligned. This causes a gap to form between the sash and the frame. If they are beyond repair, it could be necessary to get them re-aligned. The interlock may also become misaligned. It is located on the hinge's side, and could require to be cleaned. In some instances it might be necessary to replace the hinges.

The second most frequent reason for draughts is window seals, these can become worn down or damaged over time, and let air escape through the gaps. Installing high-quality weatherstripping will help to stop draughts. Replace the windows made of upvc with low-emissivity glasses. This will help control indoor temperatures and decrease draughts.

One of the most effective methods to reduce drafts is to use a draught excluder, these are typically made of fabric that are filled with some type of filler. They can be put on the windowsill on top. They will keep your home warm by blocking cold air.

With a little regular maintenance and repairs windows made of upvc will continue to provide an excellent level of security and insulation for your home. It is crucial to keep in mind that all windows eventually become worn out, and it could be more cost-effective to simply replace them than to repair them. If you encounter any issues with your upvc window it is recommended to speak with a professional as soon as you can.