• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Unstick a suzuki ignis key (Get More)

suzuki jimny key's quirky, cheap little city vehicle gets a midlife upgrade. It's not a hot-hatch but it's capable of handling urban and rural tarmac well. Its tight turning circle makes driving around towns an easy task.

The new model comes equipped with smart driver assistance and safety technology that includes lane departure warning and a sleepiness alarm, which are welcome features for long drives.

Steering Lock

The steering lock is an essential security feature to stop your Ignis from being taken away when it's in drive. It's a crucial safety feature however it can be frustrating when you have to get someplace and you're not able to unlock the wheel. Luckily, there are simple things you can do to resolve the issue.

Make sure that the ignition switch is set to "on". If that's the case, then try turning the key in the same direction as you did before the wheel became locked. It's difficult, but generally it's enough to unlock the wheels.

If the wheel doesn't unlock You can spray a little of canned air into the ignition cylinder, to lubricate it. Just be sure to put on eye protection before taking this action to ensure you don't get any air that has been sprayed into your eyes! You can also make use of liquid graphite to lubricate your cylinder.

If none of these solutions work then you'll need to replace the ignition assembly. This part is easy to find in any auto parts shop. Be sure to purchase the exact replacement and compare it to the original. Also, be sure to take off the cover over the ignition so you can inspect the assembly.

Worn

The steering lock could cause the ignition switch to become stuck. This is a safety feature designed to prevent your Ignis from moving away while the engine is running. If this happens, manipulating the steering wheel will free it.

In time, your Ignis key can start to wear out and become harder to turn. It might not occur as often as a malfunctioning switch, but it can happen. If this is the case, it is recommended to replace your key.

You should also determine if there's obstructions to your Ignis key from entering the ignition cylinder. There can be debris or dirt that could get stuck in the ignition cylinder and prevent it from turning.

Try using a small amount of lubricant to see whether it will help. There are a myriad of types of lubricant available to buy, so look around your garage or at the local auto parts store to find one that is able to work.

Another option is to use an silicon "glow in the dark" key cover. These covers absorb light and release it when the conditions are dark or murky. They also help keep your key or fob from wear and wear and tear. They are available for most Suzuki models and are available via the internet or from a local Suzuki dealership.

Bent

Over time and with repeated use a key can get bent. This could cause the teeth on the key not to be in contact with the lock cylinder in the same manner and stop the key from turning the ignition. In this instance it is necessary to replace the key. It is a good plan to duplicate your spare key and keep it in a safe place.

Another reason is that the ignition cylinder itself can wear out. The lock pins inside may become stuck together and prevent the key from being able to go all the way into or out of the ignition cylinder. Replacing the cylinder can solve this issue, but it's recommended to do so before your key gets stuck in the ignition to avoid further damage.

If the keys of your Ignis remain stuck even after trying the simpler fixes it could be the time to oil the cylinder. Graphite powder or liquid graphite could assist in allowing the lock pins to move more freely and free your key. This can be found in a majority of auto parts shops. Make sure that you put your Ignis into park before applying the fluid. Do not try manipulating the Ignis with your hands to loosen it. This could lead to more serious problems.

Broken

If you've tried everything to remove a lock but it's still not moving the lock, your last resort is to try a lubricant. You can buy some of this at your local auto parts store and apply it to the inside of the cylinder for the ignition lock using a cotton ball or rag. Try again. Move the key forwards and backwards gently to spread the grease. You can try to massage it forward, but be careful not to push too hard or you could break it in the cylinder.

It's also possible that the key's internal circuitry may become inactive as time passes. This isn't nearly as common and typically means that you'll need to have the key duplicated in order to get an entirely new one.

The case of your Suzuki keyfob might also become damaged or worn. This is especially true especially if you're using an imitation key fob that has a rubber or plastic shell. In the event of a situation, The Key Crew can sometimes move the internal circuitry from the old key fob to the shell of a new case, which means you don't have to pay for an entirely new key fob. When we call to set up your service, we'll tell you know if this is a feasible option.