• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Window Sash Repairs

Regularly inspect the window repair sashes for signs of damage, mildew and mold. You can save future repair costs by catching problems in the early stages before they become too much.

The sash is the internal frame that is vertically moved upwards or downwards in windows that are open. This article will teach you how to perform several simple repairs to the sash.

Weather Stripping

Wooden window sashes are a great way to add an elegant appearance to your home. They are also sturdy and can last many years provided they are properly maintained. However, they can become damaged or degrade in time due to exposure to the elements and wear and tear. Sash repair specialists can restore windows to their original state and maintain their appearance longer than replacement windows.

The first step for sash window repairs is addressing weather stripping, which can be found on both the sash and frame. It can cause drafts if it's damaged or is loose. To fix it, start by determining the brand of your window and the date of manufacture for the glass (etched in the corner of the glass or on the aluminum spacer between panes). Remove the sash and mark its size and width so that you can purchase new weather stripping that is compatible with the original.

Then, you can remove the sash from its holder and place it on an even surface that allows you to reach all four sides. If the sash is double-hung, take out the ropes and weights that should fall into the pocket in the jamb lining. After removing the sash with the utility knife, take off the weather stripping from the old sash by hand or using a putty blade.

Once the sash is clear and clean, you can put in the parting stops. These are long pieces that divide the sashes. Pam prefers the standard 1/2-inch by 3/4 inch window trimmings from the lumberyard. However, you can also substitute for a scrap piece of lumber.

After removing the parting stop and cutting it to length and then apply a thin layer of glazing compound to the bottom of the sash. Smooth out the compound using your putty knife and let it dry for at least a day. When the putty is fully cure and dried, you can apply a topcoat of acrylic latex. This coating will protect the putty and give your sash a fresh look.

Sash Hardware

The hardware that supports window sashes may wear out with time and use. This could result in the window or door that is difficult to open or close. The good thing is that fixing and replacing this hardware is usually quite simple and inexpensive. If a sash is difficult to operate, try spraying some oil into the jamb channel then slide it open to see if this solves the issue. If not, the problem is likely to be with the sash balance, and you'll need to remove the sash to access the hardware.

Ideally, window sashes must swing open and closed with minimal effort but this can be a difficult task when the weights wear out or if the sash that joins rail isn't properly glazed. This problem can be caused by a number of things, such as lack of maintenance or by an incorrect weight rating for the particular window sash.

If the hinge arms on windows begin to slide, this could cause the sash to drag and eventually hit against the frame in the opposite corner (Photo 1). To fix this issue, first make sure the sash is firmly seated in the frame's opening and then remove it from the window. If the sash is fixed to the hinge arm, take it off the hinge and replace it. (Photo 2). Then, you can install the new sash (Photo 3).

Windows that are old, especially in older houses, can be difficult to open and close, because of sagging hinges and general inefficiency. Sometimes just a few easy fixes can allow these windows to operate smoothly again and help homeowners save money on energy costs.

It is important to have the tools you require before you begin. Mark the location of the hinge channel on the frame (Photo 1) using a pencil. This will make it easier to position the channel in the proper place when you are finished. Remove the sash and take off the hardware including the parting beads (Photo 2) and the cords or chains that secure it. A hot gun with nozzle shield and a medium setting can soften any hardened putty. Remove the old sash and store it in a bag labeled.

Sash Weights

Sash weights are able to be replaced to improve the performance of your window sash, and also reduce the cost of energy. Sash weights consist of heavy iron or lead cylinders that are enclosed in a hidden cavity and attached by ropes to the moveable window sash. These weights act as counterbalances, allowing you to open and shut the upvc window repair near me without requiring mechanical or electrical devices. If they fail, sashweights are usually left unnoticed or disabled by homeowners.

It's not easy to retrieve the sash-weight that fell from the cavity, so you'll want to find one that is suitable for the. You will also need an additional piece of string, a length sash cord and some sash pulleys that will tie the new sash weights the sash cord.

Mortise and Tenon joints can be used to join older wood windows. The wood pegs that hold the components together can be removed with a pin punch and hammer. The majority of them have an enormous diameter on one side and a smaller size on the other, so it is essential to remove the smaller-diameter sides first. Later sashes used glue instead of pins. They can be separated by using a knife and mallet.

After the sash has been removed then you can take out the sash stop and access the weight pocket. Usually, this is done through an opening at the bottom of each jamb. The hole is then covered with a wooden access panel that can be ripped off to allow you to observe the inner workings of the frame.

After the sash has been stopped and the access panel has been removed, you can take off the weight that was previously installed and replace it. Be sure to weigh the sash before you do this, as the weights that were previously used may be different sizes than what is needed. Once the new weight is in place then tie a string to it and then thread it through the sash pulley. Then, nail the string to your boxed frame. Leave a few inches at the end of the string to allow for future adjustments.

Sash Cords

Most double-hung windows of the past have a cord or chain attached to the weights that keeps the sashes in balance in the jamb. Over time, these cords could break, making it impossible to raise the window. A new sash cable will give you the ability to raise and lower the sash, and keep it in position when opened.

The first step in replacing sash cords is to find and remove the access panels within the jambs. These are usually installed by screws or nails and will need to be removed or relocated. You could use a hammer and chisel for removing them however, it is always best to lay down dust sheets before beginning any work.

Once the access panel is removed, you can begin working on the sash. Utilize a flat bar or chisel to pull the tiny parting beads from their grooves. These are often wedged in or nailed in, but they can be removed and it's worth your time. If the sash remains in place, pry the mortise and tenon joints free with a hammer or screwdriver, then remove each wood peg. You should be able to move the sash back and forth without difficulty, though it will probably need some oiling if it seems stiff.

Take a measurement of the length of sash chain/sash cord needed to reach the sash slot on the bottom from the pulley on the top of the jamb. Cut the cord or chain, and then secure it in Step 6 above. You can use a hammer and screws or nails, however nails are less likely to cause damage.

It is best to keep the weights that came with the original counterbalance unless you have purchased a kit to replace the old counterbalance. It's not too expensive to purchase them from a salvage store and they will be easy to install once you have the sash open. Depending on the size of your window, one or two sashweights might be required to keep it open.