• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Window Sash Repairs

Regularly inspect the window sashes for signs of damage, mildew and mold. If you catch these issues early you will save money on repairs in the future.

The sash is an interior frame that is vertically moved up or down in windows that are open. This article will show you how to do simple sash repairs.

Weather Stripping

Wood window sashes give the classic look to your home. If properly maintained, they can last for years. However, they can become damaged or degraded over time due to exposure to the elements and wear and tear. Sash repair specialists can restore windows to their original condition and maintain their appearance much longer than replacement windows.

Weather stripping is the first aspect to consider when you are repairing windows that have sash. It's located on both the frame and sash. If it's worn or loose, out, it can cause drafts, as well as other issues. To fix it, begin by determining your window's brand and the date on which the glass was manufactured (etched in the corner of the glass or on the aluminum spacer between panes). Take the sash off and mark its width and height so that you can get new weather stripping that is compatible with the original.

Then, take the sash from its holder, and place it on an even surface that allows you to see all four sides. If your sash has been double glazed window repairs Near me-hung, take out the ropes and weights that should be buried within the jamb lining. After removing the sash using the utility knife, remove the weather stripping that was left by hand or with a putty knife.

Once the sash is clear and clean, you can put in the parting stops. These are long pieces that separate the sashes. Pam prefers to use standard 1/2-inch by 3/4-inch window trim from the lumberyard. However, you can also substitute a scrap piece of wood.

After removing the stopper for the parting and cutting it to length, apply a thin coat of glazing compound on the bottom of the sash. Smooth the compound using a putty tool, and let it dry for at least a day. After the putty has completely cure and dried, you can apply a topcoat of acrylic. This will protect the putty, and give your sash an updated look.

Sash Hardware

The hardware that supports the window sashes may wear out with time and use. This could lead to a door or a upvc window repairs that is difficult to open or close. It's important to know that replacing and repairing this hardware is often straightforward and cost-effective. If a sash becomes difficult to operate try spraying oil into the jamb channel then open it to see if that solves the issue. If not, the issue is likely to be with the sash balance and you'll need to take out the sash in order to access the hardware.

Ideally, window sashes must swing open and closed with minimal effort however, this can be difficult if the weights become worn or if the sash that joins rail isn't properly glazed. This issue could be caused by a variety of factors, including lack of maintenance or by the wrong weight rating for the specific sash.

If the hinge arms of a window begin to slide, this could cause the sash's to drag and eventually strike the frame in the corner directly opposite the hinge arm (Photo 1). To correct the issue make sure the sash is aligned in the frame opening, and then take it off. If the sash was screwed onto the hinge arm, take it off the hinge and replace it. (Photo 2). Install the new sash next (Photo 3).

Due to hinges that are sagging, and a general deficiency in energy efficiency, old windows especially in older homes, can be difficult to open or close. In most instances, a few minor repairs can turn these windows into smooth operation for the first time and save the homeowner cash on energy costs.

It is crucial to have the tools needed before you start. Mark the hinge channel's location on the frame (Photo 1) with a pencil. This will make it easier to put the channel in the proper position after you've finished. Take the sash off and take out all the hardware, including the parting beads cords, chains, and cords that help to hold the sash. A hot gun with nozzle shield and medium setting will soften any hardened putty. Take off the old sash and store it in a labeled bag.

Sash Weights

Sash weights can be changed to enhance the efficiency of your window sash, and also reduce energy costs. Sash weights are hefty lead or iron cylinders, which are enclosed inside a hidden compartment and connected to the movable the sash with a rope. They provide counterbalance, allowing the window to be closed and opened without the use of electrical or mechanical devices. The sash weights are usually disregarded or disabled by homeowners and turned into scrap when they fail; therefore, you may need to find replacements.

It's not easy to retrieve an sash-weight which has fallen from the cavity, so you'll need to find one that fits correctly. You will also require a new piece of string, a length of sashcord and a few sashpulleys for tying the weights you are replacing to the cord.

Older wood windows are joined using mortise and tenon joints. Pin punch and hammer can be used to take out the wood pegs holding the components together. The majority of these pegs are big on one side, and smaller on the other. It is crucial to first remove the smaller diameter sides. Later sashes used glue instead of pins. They can be cut by using a knife and mallets.

After the sash has been removed then you can take out the stopper on the sash and get access to the weight pocket. Usually this is accomplished by drilling an opening at the bottom of each jamb. This hole is then covered by an access panel of wood that can be ripped off to let you view the inside of the frame.

Once you have the sash stopped and the access panel removed, you will be able to take off the old sash weight and replace it with the new. Be sure to weigh the sash prior to you do this, as the weights that were previously used may be different in size from what you require. After the new weight is installed then tie a string to it and then thread it through the pulley for the sash. Then, you can nail the string to the frame, leaving a few inches of string hanging from the head for future adjustment.

Sash Cords

The majority of double-hung windows with a history have a cord or chain connected to the weights that supports and keeps the sashes level within the jamb. As time passes, these cords may break, making it difficult to raise the window. A new sash cable will give you the ability to raise and lower the sash and keep it in position when it is opened.

The first step to replace cords for sash is to locate and remove the access panels within the jambs. They are typically fixed or screwed in and will need to be removed or moved. You might be able to employ a hammer and chisel to remove them, but it's always better to lay down dust sheets before beginning any work.

After the access panel has been removed, you can begin working on the sash. Take the narrow beads (also known as "tie rails") out of their grooves using the chisel or flat bar. They are usually wedged in or nailed, but they can be snipped out and it's worth your time. If the sash is still in place, pull the mortise-and-tenon joints out with a hammer or screwdriver, then remove each wood peg. The sash should be able move freely now, but it might require some lubrication to make it feel less stiff.

Measure the length of the sash chain or sash cord required to reach the sash slot on the bottom, and the pulley located at the top of the jamb. Cut the cord/chain and then fix it as described in Step 6 above. You can use a hammer, nails, or screws. However, nails are less likely to cause damage.

It is recommended to keep the weights that came with the original counterbalance unless you have purchased a kit that will replace the counterbalance. It's not too expensive to purchase them from architectural salvage stores and they'll be easy to install once you have the sash unlocked. Depending on the size of your window one or two sashweights may be needed to keep it open.