• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is a great choice for modern homes. They are easy to maintain and durable, as well as long-lasting. They don't rot or rust like aluminum and timber.

It is crucial to wash and oil UPVC windows and doors regularly. This will prevent unnecessary repair costs as well as improve the efficiency of energy.

1. Broken Glass

If the glass in your window has been damaged, it could cause a large deal of damage to your home, which can make it very hazardous and possibly fatal. It is essential to ensure that your windows are in good working order.

Single-pane windows are fairly simple to replace, and they typically fit into frames that were previously in use very easily. If windows with double panes are joined by internal beading, it is more difficult to remove and replace the old panes. In this situation, you will need to find some plastic spacers that help the new pane to fit perfectly into the window frame.

Wearing protective eyewear and thick gloves is essential when you are planning to remove the glass yourself. You should also lay down a dropcloth prior to you begin working on the window panes so that any shards fall on the fabric, not onto the floor, where they could be trampled under.

It's a great idea to seal the gap after the glass is removed. This will keep drafts and water from entering your home until a professional comes out to fix the window. It also acts as a barrier, preventing any intruders to gain access to your home. If the gap is large, you might want to consider using an alarm door that comes with an integrated window, as it offers the best of both worlds.

2. Sagging

Upvc is a long-lasting and energy efficient alternative to timber sash window. Over time, they can develop a number of problems, including sagging. A sagging uPVC windows could cause issues with light, draughts and even security. If you notice that your uPVC window is beginning to shrink, it's important to act quickly to stop the issue from worsening.

To fix a window that is sagging you can try repositioning the hinges. First, you'll need to open the windows so you can reach the frame. Then, using the screwdriver, you'll be able to remove the top and bottom hinges and adjust them by turning them clockwise or counter-clockwise. Once you've repositioned the hinges, close the window and verify the fitting. If you're satisfied with the fit, tighten the screws to ensure they remain in place.

If you aren't able to move the hinges you may require replacing the seal. Rubber seals can dry out and lose their elasticity over time, causing them to lose their tightness. It is essential to replace your seal as soon as you can in order to keep your uPVC window watertight and draughtproof.

uPVC handles can also become loose. This is typically caused by screws that have loosened over time, but it could also be due to the handle mechanism getting worn out. Luckily, it's not difficult to repair a loose upvc window repairs near me window handle yourself. First, you'll need close the window and perform an initial test fit. The joints at the corners of the sash must align with the joint on the casing. If it doesn't then you can use the screwdriver to loosen up the handle. Then, turn the mechanism to position.

3. Water Leaks

If you wake up to wet floors and mouldy walls each time it rains, it's important to take action. Windows that leak water do not only lead to the destruction of your home's structure but also undermine your efforts to control the temperature inside your home. The most common cause for leaking uPVC windows is that the sealant around the frame has been damaged or is missing.

This is a fairly simple fix that can be done by any competent DIYer. Depending on how severe the issue is, the old caulking may need to be removed. It is essential to keep in mind that when it comes to uPVC window repairs you should avoid the temptation to "over-caulk in order to make the area harder to clean and can reduce your energy efficiency.

It is important to check that the drainage holes are free of debris and that the sill pan is angled in a way that allows it to drain away from the window. In more serious situations, you may need to think about replacing the window.

Other signs of long-term water leakage include rotted sills and the appearance of black spots of mold on the wall near the window. This fungus thrives under humid conditions and can propagate quickly throughout the home.

It is also important to note that if the leak originates from the glass in your double glazed windows, it is more likely to be a problem with the glass seal, rather than the frame or sliding. A uPVC specialist can easily fix this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges could be at fault when your uPVC window is difficult to open or it opens in an ease. Anyone who is a skilled DIYer can fix the hinges in a matter of minutes.

Like any mechanical part, hinges can be damaged over time. The process of replacing a hinge on a window is essentially a simple process, but it's simpler if you have someone to help you hold the frame up.

It is also worth checking that the uPVC hinges are opening and closed in the right direction. Look for the arrows on each hinge to determine which direction the window should be opened.

Window hinges that aren't working properly can be caused by incorrectly opening the window a certain manner or because of improper installation in the factory. Sending us photos via our website is often enough to resolve the problem. We are always happy to offer advice.

Regular lubrication of the hinges is essential. Applying a light engineering lubricant on the hinges is an ideal method to accomplish this. We suggest using an oil that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can allow the window open and close more easily. It can also lower the chance of windows sticking and help prevent corrosion. Ideally, you should perform this every year. WD40 and other solvent based lubricants are not recommended as they can damage the parts of your uPVC window.

5. Draughts

Draughts in upvc windows can be caused by different factors. The hinges, also due to wear and tear may become displaced, which can cause a gap to form where the sash meets the frame. If they are damaged beyond repair, it might be necessary to get them re-aligned. Second, the interlock can also become disaligned. This happens on the hinge side and could require to be cleaned. In certain instances it might be necessary to replace these.

The second most frequent cause of draughts is the window seals, these are susceptible to being worn out or damaged over time and let air escape through these gaps. Installing high-quality weatherstripping is a good way to prevent draughts. Another option is to replace the window with glass that is low-emissivity, this will help in regulating indoor temperatures and again will reduce the risk of draughts.

One of the most effective methods to reduce the draughts in your home is to use a draught excluder. These are typically fabric tubes which are filled with a kind of filler. They can be put on the windowsill on top. They can keep your home warm by blocking cold air.

With a little maintenance and repair, your upvc windows will provide excellent security and insulation for your home. It is crucial to keep in mind that all windows eventually wear out and it is more cost-effective to simply replace them rather than repair them. If you have any problems with your window made of upvc, it's best to consult an expert as soon as possible.