• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is a great option for modern homes. They are easy to maintain and are durable and long-lasting. As opposed to aluminium and timber they are not susceptible to get rusty or decay.

Cleaning and lubricating regularly UPVC windows and doors is vital. This will prevent unnecessary repair costs as well as improve the efficiency of energy.

1. Broken Glass

If the glass in your window is damaged, it can cause a great deal of damage to your home, making it very hazardous and possibly fatal. You should take the time to ensure that your windows are in good condition.

Single-pane windows are fairly simple to replace and generally fit into frames of the past easily. However when windows with double panes are held in place by internal beading, it will be more difficult to remove the old panes and put in new ones. In this case it is essential to purchase plastic spacers in order to make sure that the new pane fits into the window frame.

If you are going to attempt to remove the glass panes yourself it is important to wear the proper safety gear that includes gloves with a thick layer of material and protective eyewear. It is also a good idea to lay down a dropcloth before you start working on the glass so that any shards will fall on the fabric instead of onto the floor where they could be trodden under and cause further damage.

Once the glass is removed from the window, it's best to cover the gap with packaging tape or duct tape to block drafts and water from entering the property until a professional is able to come out and fix the window. This also serves as an obstruction to prevent intruders from making their way into your home. If the gap is large, you may be interested in a security door that has an integrated window, as it offers the best of both worlds.

2. Sagging

uPVC windows and doors are an affordable energy efficient, durable and long-lasting alternative to timber sash windows. Over time, they can develop a number of problems that include sliding. A sagging uPVC window repairs near me can cause problems with light, draughts and even security. If you find that your uPVC window is beginning to sag it's important to act quickly to prevent the problem from worsening.

To fix a sagging window you can try repositioning the hinges. First, you'll need to unblock the windows so you can access the frame. Then, you can remove the top and bottom hinges with a screwdriver and adjust them counter-clockwise or clockwise. Close your window to test the fit after you have moved your hinges. If you're satisfied with the fit, you can tighten the screws until they stay in the right place.

If you are unable to move the hinges, you may need to replace the seal. Over time rubber seals can lose their elasticity and dry out, which causes their tightness to decrease. It is important to replace your seal as soon as you can in order to keep your uPVC window waterproof and draughtproof.

UPVC handles can also loosen. Often this is due to screws that have become loose over time. However, it could also happen because the handle mechanism has been worn out. It's fairly simple to fix a loose uPVC handle. First, you'll need to close the window and then perform a test to ensure that it fits. The corners of the sash need to align with the casing joint. If it doesn't then you can use the screwdriver to loosen up the handle. Then, turn the mechanism to position.

3. Water Leaks

It is important to take action if you awake each day to find a smoky wall and floors that are wet. The leaks of water from windows do not only lead to the destruction of your home's structure but also hamper your efforts to control the temperature in your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.

This is a simple fix that can be done by any DIYer who is competent. Based on the severity of the issue the caulking that was used up may need to be removed before a fresh layer can be put on. It is crucial to remember that when it comes to uPVC window repairs, you should not be tempted to 'over-caulk and then make the area more difficult to clean and decrease the efficiency of your energy usage.

Verify that the drainage holes do not have debris inside them and that the sill pan is angled correctly to drain away from the window. In more serious cases you may need to think about replacing the window.

Other signs of long-term water leakage include decayed sills and the appearance of black spots of mold on the wall near the window. This fungus thrives under humid conditions and can propagate quickly throughout the home.

It is also important to note that if the leak is coming from between the glass in your double glazed windows, it is more likely to be a problem with the glass seal, rather than the frame or sagging. A upvc window repairs near me specialist can easily solve this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or slack and open in a breeze It could be hinges at fault. They can be easily replaced by any competent DIYer and are usually done within a few minutes.

Like all mechanical parts hinges are prone to be damaged over time. It's very simple to replace a hinge on a window, but it's easier if someone helps you hold the frame.

It is also important to verify that the uPVC hinges are being opened and closed in the correct direction. You can do this by looking for the arrow on each hinge. This indicates the direction in which the window should be opened.

The problem can be caused due to opening the window in the wrong way or a faulty installation in the factory. Sending us photos through our website can often resolve the problem. We are more than happy to provide advice.

Regularly lubricating the hinges is also necessary. Applying a light engineering lubricant on the hinges is a good method to accomplish this. We suggest using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It also decreases the risk of a window sticking and help prevent corrosion. This must be done at a minimum once a year. WD40 and other solvent-based oils are not recommended because they will damage parts of your uPVC window.

5. Draughts

Draughts can be caused by different factors. The hinges, also due to wear and tear can become misaligned, this can cause a gap to form where the sash meets the frame. These can be easily repaired by giving them good clean, but in the event that they are beyond repair it could be necessary to get them realigned or replaced. Secondly the interlock, this is on the hinge side of the window and can also be misaligned, and again it is feasible to give them a good clean, but in some cases it might be necessary to get them replaced.

The next common cause of draughts is the window seals. These are prone to wear or damaged over time, and will allow air to escape through these gaps. This can be prevented by replacing them with high-quality weatherstripping. Replace the windows made of Upvc with low-emissivity glass. This will help control indoor temperatures and decrease the possibility of draughts.

Another, and most effective ways to cut down on draughts is by using a draught excluder. These are usually fabric tubes which are filled with a kind of filler. They can be positioned on the top of your windowsill. These will help to stop cold air from entering and keep your home warm and cosy!

With a little maintenance and repairs your windows made of upvc will continue to provide a great level of insulation and security for your home. It is crucial to recognise that all windows have a lifespan and eventually, they will reach the point when it's more efficient to replace them than fix them. If you are experiencing issues with your upvc window it is recommended to speak with an expert as soon as possible.