• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is a great option for modern homes. They are easy to maintain and durable, as well as long-lasting. In contrast to aluminium and timber, they do not get rusty or decay.

Regularly cleaning and lubricating UPVC windows and doors is essential. This will prevent unnecessary repair costs as well as improve the efficiency of energy.

1. Broken Glass

If the glass in your window is broken it can cause a great deal of damage to your home, which can make it very hazardous and possibly fatal. It is essential to ensure that your windows are in good working order.

For single pane windows, it is fairly easy to replace windows, and the new one will usually fit inside the old frame very easily. However If windows with double panes are anchored by internal beading it will be more difficult to remove the old panes and put in new ones. In this situation it is essential to purchase plastic spacers in order to make sure that the new pane fits into the window frame.

If you're planning to try to remove the window panes by yourself it is important to wear appropriate safety gear such as gloves that are thick and protective eyewear. It is also an excellent idea to lay down a drop cloth before you begin working on the glass so that any fragments of glass fall onto the fabric instead of landing on the floor, where they could be trampled on and cause further damage.

Once the glass has been removed, it's a good idea to seal the gap with clear packaging tape or duct tape to block drafts and water from entering the property until a professional can come out and fix the window. It also acts as a barrier to prevent any criminals from getting into your home. If the gap is large, you might want to consider using the security door with an integrated window as it offers the best of both worlds.

2. Sagging

uPVC windows and doors are an affordable, durable and energy-efficient alternative to timber sash windows. In time, they could develop a variety of issues, including sagging. A sagging window can cause problems with light, draughts, and even security. It's important to take action when you realize that your uPVC windows are sliding.

To fix a sagging window you can try to reposition the hinges. You'll first need to open the windows to reach the frame. You can then unscrew both the hinges at the top and bottom using a screwdriver and adjust the hinges clockwise or counter-clockwise. Close your window to test the fit after you have repositioned your hinges. If you're satisfied with the fit of your window, you can tighten screws to secure them in the right position.

If you are unable to reposition the hinges, you may require replacing the seal. As time passes, rubber seals lose their elasticity and become dry and cause them to lose tightness. It is crucial to replace your seal as soon as you can to keep your uPVC window watertight and draughtproof.

uPVC handles could also loosen. Most often, this is caused by screws that have come loose over time. However, it can be due to the fact that the handle mechanism has worn out. It's relatively easy to fix a loose uPVC handle. First, you'll need to close the window and then perform a test fit. The corners of the sash need to be aligned with the casing joint. If it doesn't you can use a screwdriver to loosen the handle. Then turn the mechanism to position.

3. Water Leaks

If you wake up to wet floors and damp walls every time it rains it's crucial to take action. Water leaks through windows can cause structural damage to your home and affect your ability to regulate the temperature in your home. The most frequent reason for leaks in uPVC windows is that the sealant surrounding the frame is damaged or not present.

This is a simple fix that can be accomplished by anyone who is a DIYer with the skills. Depending on the severity of the problem the caulking that was used up may need to be removed before a fresh layer can be put on. It is essential to keep in mind that when it comes to uPVC window repairs, you should not be tempted to apply too much caulk and then make the area harder to clean and can decrease the efficiency of your energy usage.

It is essential to ensure that the drainage holes are free of debris and that the sill pan is angled properly so that it drains away from the window. In more serious situations, you might have to consider replacing the window.

Mold spots and rotted sills are also signs of water leakage. This mold thrives in damp environments and can quickly spread throughout the house.

If the leakage occurs between the double-glazed window, it is more likely the issue is more with the seal rather than the frame. This can be easily corrected by an uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your upvc window repair windows are brittle to open, or are loose and open with ease, it may be hinges at the fault. These are easily replaced by any competent DIYer and can usually be done within a few minutes.

Most households in the UK will have top-hung or side hung uPVC windows that use hinges and like any mechanical part they can wear down over time. Changing a window hinge is an easy process, but it's easier when you have a person to help you hold the frame up.

Check that the uPVC hinges are closed and open in the correct direction. This can be done by looking for the arrow on each hinge, this indicates the direction in which the window should be opened.

The problem can be caused due to opening the window in the wrong way or a faulty installation at the factory. Sending us photos via our website is often enough to resolve the problem. We are happy to give suggestions.

Regular lubrication of the hinges is also necessary. Applying a light engineering lubricant on the hinges is a great way to do this. We recommend using a lubricant that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It can also reduce the chance of windows sticking and help prevent corrosion. Ideally, you should do this once a year. WD40 and other solvent-based oils are not recommended because they can damage the parts of your uPVC window.

5. Draughts

Draughts in windows made of upvc can be caused by a few different factors. The hinges can also be unbalanced due to wear, creating gaps between the frame and sash. These can be easily fixed by giving them a good clean, but in the event that they are beyond repair it may be necessary to have them realigned or replaced. The second is the interlock, which is on the hinge side of the window and can also be misaligned, and again it is feasible to give them a thorough clean, however in some cases it might be necessary to get them replaced.

The next most common reason for draughts is window seals. They can become worn down or damaged over time and let air escape through these gaps. Replacement of these with high-quality weatherstripping will help to keep draughts at bay. Another option is to replace the window with low-emissivity glass, this will help to regulate indoor temperatures and will reduce the possibility of draughts.

Another, and most effective ways to reduce draughts is by using a draught excluder. These are usually fabric tubes which are filled with a kind of filler. They can be positioned on the top of your windowsill. They can help block out cold air and keep your home warm and cosy!

With a little maintenance and repairs your windows made of upvc will provide an excellent level of insulation and security for your home. It is crucial to keep in mind that all windows eventually get worn out and it is cheaper to replace them than to repair them. If you are experiencing issues with your window made of upvc it is recommended to speak with a professional as soon as possible.