• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is an excellent option for modern homes. They are durable, long-lasting and easy to maintain. Unlike timber and aluminium, they don't corrosion or rot.

It is important to clean and oil UPVC doors and windows regularly. This will save you from unnecessary repair costs and improve the efficiency of energy.

1. Broken Glass

If the glass in your window is damaged, it can cause a huge amount of damage to your home, which can make it extremely dangerous and possibly fatal. It is essential to ensure that your windows are in good working order.

For single pane windows it is fairly easy to replace them, and the new window is usually able to fit into the frame of the previous one easily. If you have double-paned windows that are joined by internal beading, it is more difficult to remove and replace the old panes. In this situation, it is necessary to purchase plastic spacers in order to help the new pane fit into the window frame.

Wearing eye protection and thick gloves is essential if you plan to remove the glass yourself. It is also recommended to lay down a drop cloth before you start working on the glass so that any shards fall onto the cloth instead of landing on the floor, where they could be trodden under and cause further damage.

It's a good idea to seal the gap after the glass is removed. This will prevent water and drafts from entering your property until a professional comes out to fix the window. This will also act as a barrier that will prevent any intruders from getting access to your home. If the gap is large, you may want to consider using the security door with an integrated window, as it offers the best of both worlds.

2. Sagging

Upvc is a long-lasting and energy efficient alternative to timber sash windows. However, with time, they can suffer from a variety of problems including sliding. A sagging window can cause problems with light, draughts and even security. If you notice that your uPVC window is beginning to shrink, it's crucial to act fast to prevent the problem from becoming worse.

Repositioning the hinges can aid in fixing a window that is sliding. You'll first need to open the windows so you can get at the frame. Then, using an screwdriver, unscrew the hinges on the top and bottom and adjust them by turning them clockwise or anti-clockwise. Close your window to check the fit after having relocated your hinges. If you're satisfied with the fit, you can tighten the screws to ensure they remain in place.

If you aren't able to move the hinges you may require replacing the seal. Seals made of rubber can dry out and lose their elasticity over time, causing them to lose their tightness. If this happens, it's crucial to replace the seal as quickly as possible to ensure your uPVC windows are watertight and secure from draughts.

uPVC handles may also become loose. This is usually due to screws that have become undone over time, but it could be due to the mechanism of the handle wears out. Luckily, it's not difficult to repair the loose uPVC window handle yourself. First, you'll need to close the window and perform a test fitting. The corners of the sash need to be aligned with the casing joint. If it isn't then you can make use of a screwdriver to loosen the handle, and then reverse the mechanism back into its original position.

3. Water Leaks

It is essential to act if you wake up every morning to find a smoky wall and wet floors. Leaks of water from windows can cause structural damage to your home and also hinder your ability to control the temperature inside your home. The most frequent reason for leaks in uPVC windows is that the sealant surrounding the frame is either damaged or not present.

This is a simple fix that can be accomplished by any DIYer who has the ability. Depending on how serious the issue is, the old caulking may need to be removed. It is essential to remember that when it comes to uPVC window repairs you should avoid the temptation to "over-caulk and then make the area more difficult to clean and could reduce the efficiency of your energy.

It is important to check that any drainage holes are clear of debris and that the sill pan is angled properly so that it drains away from the window repair near me. In more serious cases you might need to consider replacing the window.

Mold spots and rotted sills are also signs of water leakage. This fungus thrives in conditions of dampness and can spread quickly throughout the home.

If the leakage occurs between the double-glazed glass it is more likely that the problem is with the seal than the frame. A uPVC specialist can easily solve this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges may be to blame for the reason that your uPVC window is difficult to open or it opens in an ease. Anyone who is a skilled DIYer can fix these in a matter of minutes.

Like any mechanical component hinges are prone to be damaged over time. It's easy to replace a hinge on a window but it's much simpler if you have someone to help you hold the frame.

It is also important to verify that the uPVC hinges are opened and closed in the correct direction. Check for the arrows on each hinge to determine the direction in which the window should be opened.

The problem with the hinges on windows could be the result of incorrectly opening the window a certain way or by improper installation in the factory. Sending us photos via our website is often enough to resolve the problem. We are always happy to give suggestions.

It is also essential to ensure that the hinges are lubricated on a regular basis. Applying an engineering lubricant that is light to the hinges is a good method of doing this. We suggest using the lubricant that doesn't contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It can also prevent corrosion and reduce the possibility of sticking. The ideal time to do this at least once a year. WD40 or other solvent-based oils should not be used since they could damage your uPVC windows.

5. Draughts

Draughts can be caused by several different things. First, the hinges because of wear and tear, may become displaced, which causes a gap to form between the sash and the frame. This can be easily repaired by giving them a thorough clean, however when they're beyond repair, it could be necessary to have them aligned or replaced. Second, the interlock can be misaligned. It is located on the hinge's side, and could require to be cleaned. In some cases, it may be necessary to replace the hinges.

The seals may wear out or be damaged over time, allowing air escape. This can be avoided by replacing them with high-quality weatherstripping. Replace the upvc windows with low-emissivity glass. This will help control indoor temperatures and decrease draughts.

The last way to reduce the amount of draughts is to use a draught-excluder. These are typically fabric tubes filled with a filler, which can be hung over your window sill. They will keep your home warm by blocking cold air.

With a little regular maintenance and repair your windows made of upvc will provide a great level of insulation and security for your home. It is crucial to keep in mind that all windows will eventually get worn out and it could be more cost-effective to replace them rather than repair them. If you are having issues with your upvc windows, it's best to seek professional assistance as soon as you can.