• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a fantastic choice for modern homes. They are durable, long-lasting and easy to maintain. In contrast to aluminium and timber, they do not corrosion or rot.

It is important to clean and oil UPVC windows and doors regularly. This will help avoid unnecessary repair costs as well as improve energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it can cause a great amount of damage to your home, which can make it very dangerous and potentially fatal. It is essential to ensure that your windows are in good condition.

Single-pane windows are relatively easy to replace, and they generally fit into frames of the past easily. However, if you have double pane windows that are anchored by internal beading it will be more difficult to get rid of the old panes and put in new ones. In this instance you'll need to source some plastic spacers that assist the new pane to fit perfectly into the window frame.

Wearing eye protection and heavy gloves is essential when you are planning to remove the glass yourself. You should also lay down a dropcloth before you begin working on the window panes so that any shards of glass fall onto the fabric, not onto the floor and could be trampled.

It's a great idea cover the gap with tape after the glass is removed. This will keep drafts and water from getting into your home until a professional arrives to repair the window. This also serves as an obstruction to prevent intruders from making their way into your home. If the gap between the window and the door is significant, you may need to consider a security screen that also has an opening. This will give you the best of both.

2. Sagging

Upvc is a long-lasting, energy-efficient and affordable alternative to timber sash window. Over time, they can develop a number of problems such as sliding. A window that isn't properly aligned can cause problems with light, draughts or even security. It is crucial to act as soon as you notice your uPVC windows are falling down.

To fix a sagging window you can try to reposition the hinges. To accomplish this, you'll need to open the window so that you can access the frame. Then, remove both the hinges at the top and bottom with a screwdriver and adjust the hinges clockwise or counter-clockwise. After you've repositioned the hinges, close the window and verify the fit. If you're satisfied with the fit, you can tighten the screws until they remain in position.

If you can't reposition the hinges, you might require replacing the seal. As time passes, rubber seals lose their elasticity and become dry and cause them to lose tightness. It is important to replace your seal as soon as you can in order to keep your uPVC window repairs watertight and draughtproof.

uPVC handles could also loosen. Most often this is due to screws that have become loose over time. However, it could also happen because the handle mechanism has been worn out. It's fairly simple to fix a loose uPVC hand. You'll first need to close the window and perform an experiment fitting. The corners of the sash must align with the casing joint. If it does not, you can use the screwdriver to loosen the handle. Then, turn the mechanism to position.

3. Water Leaks

If you're waking up to damp floors and UPVC window repairs mouldy walls each time it rains, it's crucial to take action. Windows that leak water do not only lead to the degrading of the structure of your home but also hinder your efforts to control the temperature inside your home. The most frequent reason for leaks in uPVC windows is that the sealant around the frame is damaged or missing.

This is an easy fix that can be completed by any DIYer who is competent. Depending on how severe the issue is, old caulking might need to be removed. It is important to keep in mind that when it is about uPVC window repairs, do avoid the temptation to "over-caulk' as this will only make the area more difficult to clean and decrease the efficiency of your energy usage.

Make sure that the drainage holes do not have debris in them, and also that the sill pan is angled correctly to drain away from the window. In more serious instances, you might need to consider replacing the window.

Other indicators of long-term water leakage include sills that are rotten and the appearance of black spots of mold on the walls near the window. This fungus thrives in damp conditions and can spread quickly throughout the house.

If the leakage occurs between the double-glazed window, it is more likely that the issue is more with the seal than the frame. A upvc window repairs specialist can easily fix this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or loose and blow open with ease, it may be the hinges that are at fault. These are easily replaced by any competent DIYer and are usually completed in just a few minutes.

Like any mechanical component, hinges can be damaged over time. It's easy to replace a hinge on a window however it is easier if someone else helps you hold the frame.

It is also important to verify that the uPVC hinges are opening and closed in the right direction. This can be done by looking for the arrow on each hinge. This shows which way the window should be opened.

The issue could be caused either due to opening the window in the wrong way or by a poor installation in the factory. Sending us photos via our website will often solve the issue. We are more than happy to provide suggestions.

It is also essential to ensure that the hinges are lubricated on a regular basis. This can be done by applying a light engineering oil on the hinges. We suggest using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regular lubrication will make the window easier to open and close. It can also stop corrosion and reduce the possibility of sticking. It is recommended to do this once a year. WD40 and other solvent-based fluids are not recommended since they will damage parts of your uPVC window.

5. Draughts

Draughts can be caused by different factors. The hinges can also become disaligned as a result of wear, which can cause an opening where the sash meets frame. If they are beyond repair, it may be required to realign them. Secondly the interlock, this is located on the hinge of the window, can be misaligned. Again, it is feasible to give them a good clean, but in certain cases, it may be necessary to get them replaced.

The next common cause of draughts is the window seals. They are prone to wear or damaged over time, and let air escape through the gaps. Installing high-quality weatherstripping will help to prevent draughts. Another alternative is to replace the upvc window with low-emissivity glass. this will help to regulate indoor temperatures and will reduce the risk of draughts.

The last way to reduce the amount of draughts is to use a draught-excluder. These are usually made of fabric tubes filled with a filler which can be placed over your window sill. They can keep your home warm by blocking out cold air.

The windows made of upvc can keep providing excellent insulation and security in your home by performing regular maintenance and repairs. It is crucial to realize that all windows have a lifespan and they may reach an point at which it is more economical to replace them than fix them. If you are having issues with your upvc windows, it is always recommended to seek assistance from a professional as soon as you can.