• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is a great choice for modern homes. They are long-lasting, durable and easy to maintain. In contrast to aluminium and timber, they do not get rusty or decay.

It is essential to clean and oil UPVC windows and doors regularly. This will save you from unnecessary repair costs and increase energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it can cause a great amount of damage to your home, which can make it very hazardous and possibly fatal. It is essential to take the time to ensure that you're doing all you can to keep your windows in good shape.

For single pane windows it is relatively easy to replace windows, and the new one is usually able to fit into the frame that was previously installed easily. If you have double-paned windows which are held together by internal beading, it is harder to remove and replace the old panes. In this situation you'll need find some plastic spacers that will help the new pane to fit properly into the frame of the window.

Wearing eye protection and heavy gloves is a must for anyone who plans to remove the glass by yourself. You should also lay down a dropcloth prior to you begin working on the window panes, so that any shards fall onto the fabric, not onto the floor and could be trampled.

Once the glass has been removed, it's a good idea to seal the gap with some clear packaging tape or duct tape to block water and drafts from getting into the home until a professional can come out and repair the window. This also serves as a barrier to prevent any criminals from getting into your home. If the distance between the door and the window is large, you might prefer security screens that includes an opening. This will give you the best of both.

2. Sagging

Upvc is a long-lasting and energy efficient alternative to timber sash windows. However, over time they can suffer from a variety of issues, including sliding. A window that isn't properly aligned can cause problems with light, draughts or even security. It's crucial to act when you discover that your uPVC windows are falling down.

To repair a window that is sagging, you can try repositioning the hinges. First, you'll need to open the windows so you can access the frame. Then, using an screwdriver, unscrew the hinges on the top and bottom and adjust them by turning them clockwise or anti-clockwise. Once you've adjusted the hinges, close the window and check for an appropriate fit. If you're satisfied with the fit, tighten the screws until they remain in place.

If you cannot reposition the hinges, you might have to replace the seal. Rubber seals may dry out and lose their elasticity over time, causing them to loosen. It is essential to replace your seal as quickly as you can in order to ensure that your uPVC window waterproof and draughtproof.

UPVC handles can also become loose. Most often it is due to screws that have become loose over time. However, it can occur because the handle mechanism has been worn out. It's a good thing that it's simple to repair the loose uPVC window handle yourself. The first step is to close the window repairs near me and perform a test to ensure that it fits. The corner joints of the sash must be aligned with the casing joint. If it isn't you can use a screwdriver to loosen the handle. Then turn the mechanism to position.

3. Water Leaks

It is crucial to act if you get up each morning to discover mouldy walls and wet floors. Water leaks from windows are not just a cause for degrading of the structure of your home but also hinder your efforts to regulate the temperature in your home. Most of the time, uPVC window repairs uPVC window leaks are caused by damaged or missing sealant.

This is an easy fix that can be done by any DIYer who has the ability. Depending on the severity of the problem is, the old caulking might need to be removed. It is essential to remember that when it is about uPVC window repairs, do not be tempted to apply too much caulk in order to make the area harder to clean and can reduce your energy efficiency.

It is important to check that any drainage holes are clear of debris and that the sill pan is placed properly so that it drains away from the window. In more extreme situations, you may have to replace the window.

Moldy sills and rotten ones are another sign of water leakage. This fungus thrives in damp conditions and is able to quickly spread throughout the home.

It is also important to keep in mind that if the leakage originates from the glass in your double glazed windows, it's more likely to be an issue with the glass seal, rather than the frame or sagging. This can be easily fixed by a uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or are loose and blow open in a breeze it could be the hinges that are at fault. These are easily repaired by any DIYer who is skilled and can usually be completed in just a few minutes.

Like any mechanical component hinges are prone to be damaged over time. It is essentially a very simple procedure, but it is easier to do when you have a person to help you hold the frame in place.

Check that the uPVC hinges are closed and open in the right direction. This can be done by looking for the arrows on each hinge. This indicates which way the window should open.

The issue could be caused by opening the window incorrectly or due to a poor installation at the factory. Sending us a photo via our website is often enough to solve the issue. We are always happy to provide suggestions.

Regular lubrication of the hinges is essential. This can be accomplished by applying a light engineering oil on the hinges, we recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication can allow the window operate and close more easily. It also helps prevent corrosion and reduce the risk of sticking. The ideal time to do this once a year. WD40 or other solvent-based lubricants are not recommended as they can cause damage to your uPVC windows.

5. Draughts

Draughts in Upvc windows can be caused by a few different factors. Firstly the hinges, again because of wear and tear, can become misaligned, this will cause a gap to form where the sash joins the frame. If they are beyond repair, it might be necessary to get them re-aligned. The interlock, which is located on the hinge side of the window and can also be misaligned, and again it's possible to give them a clean but in certain cases, it may be necessary to have these replaced.

The seals may wear out or get damaged over time, allowing air to escape. This can be avoided by replacing them with high-quality weatherstripping. Replace the upvc windows with low-emissivity lenses. This will help regulate indoor temperatures and decrease the risk of draughts.

Another, and most effective ways to reduce drafts is to use a draught excluder, these are typically made of fabric that are filled with some sort of filler and can be placed on top of your windowsill. They will help keep cold air out and keep your home warm and cozy!

With a little maintenance and repairs your windows made of upvc will continue to provide excellent insulation and security for your home. It is crucial to realize that all windows have a life span and they may reach the point when it's more economical to replace them than repair them. So, if you're having issues with your upvc windows, it is recommended to seek help from a professional immediately.