• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a fantastic option for modern homes. They are long-lasting, durable and easy to maintain. Unlike timber and aluminium, they do not corrosion or rot.

It is crucial to wash and oil UPVC doors and windows on a regular basis. This will reduce unnecessary repair costs and also improve energy efficiency.

1. Broken Glass

The broken glass in your windows could cause significant damage to your home and even be fatal. It is essential to take the time to make sure that you're doing everything you can to keep your windows in good shape.

For single pane windows it can be relatively simple to replace windows, and the new one is usually able to fit into the frame that was previously installed easily. If windows with double panes are held together by internal beading, it will be difficult to remove and replace the old panes. In this situation you'll need to source some plastic spacers that will assist the new pane to fit perfectly into the frame of the window.

Wearing eye protection and thick gloves is essential for anyone who plans to remove the glass by yourself. It is also recommended to lay down a drop cloth before you begin working on the window panes, so that any shards fall onto the fabric and not on the floor, where they could be trampled under.

It's a good idea to tape the gap once the glass has been removed. This will stop drafts and water from entering your home until a professional comes out to fix the window. It also acts as a barrier to prevent any criminals from getting into your home. If the gap is large, you might want to consider using a security door that has an integrated window, as it offers the best of both worlds.

2. Sagging

Upvc is a long-lasting, energy-efficient and affordable alternative to timber sash windows. In time, they could be affected by a variety of issues such as sliding. A sagging window can cause problems with light, draughts or even security. If you notice that your uPVC window is beginning to sag it's important to act quickly to stop the issue from getting worse.

Repositioning the hinges can help fix a window that is sliding. You'll first need to open the windows so you can reach the frame. After that, using an screwdriver, remove the hinges on the top and bottom and adjust them by turning them clockwise or anti-clockwise. Close your window to check the fit after you've repositioned your hinges. If you're happy with the fit, window repairs tighten the screws until they remain in the right place.

If you are unable to reposition the hinges, you may need to replace the seal. Over time, rubber seals lose their elasticity and dry out, which causes them to lose tightness. If this happens, it's essential to replace the seal as soon as possible so that your uPVC windows are watertight and secure from draughts.

uPVC handles can also loosen up. This is typically caused by screws that have been removed over time, but it could also be caused by the handle mechanism getting worn out. It's a good thing that it's simple to repair the loose uPVC window handle yourself. First, you'll need to shut the window and perform an experiment fitting. The joint at the corners of the sash should align with the joint on the casing. If it doesn't, you can make use of a screwdriver to loosen the handle and then reverse the mechanism back into the position it was in.

3. Water Leaks

It is essential to take action if you get up each morning to find mouldy walls and floors that are wet. Windows that leak water do can not only cause destruction of your home's structure but also undermine your efforts to control the temperature in your home. The most frequent reason for leaking uPVC windows is that the sealant around the frame is either damaged or missing.

This is a fairly simple fix that can be done by any competent DIYer. Depending on how serious the issue is, the old caulking may have to be removed. It is important to remember that when it is about uPVC window repairs, you should not be tempted to apply too much caulk in order to make the area more difficult to clean and could reduce the efficiency of your energy.

Verify that the drainage holes have no debris inside them and ensure that the sill pan is properly angled to allow the water to drain from the window. In more serious instances, you might have to consider replacing the window.

Other signs of long-term water leakage are sills that are rotten and the appearance of black spots of mold on the walls near the window. This fungus thrives under humid conditions and can propagate quickly throughout the house.

It is also important to note that if the leak originates from the glass in your double glazed windows, it is more likely to be a problem with the glass seal rather than the frame or sliding. A uPVC specialist can easily fix this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or slack and blow open in a breeze it could be hinges that are at fault. They can be easily repaired by any DIYer who is skilled and can be completed in just a few minutes.

Nearly every home in the UK will have top-hung or side hung uPVC windows that have hinges and, just like any mechanical component they can wear down over time. It is an easy process, but it's easier to do if you have someone to assist in holding the frame up.

Make sure that the uPVC hinges are closed and open in the correct direction. Look for the arrows that are on each hinge to determine the direction in which the window should be opened.

The issue can be caused either due to opening the window in the wrong way or by a poor installation in the factory. Sending us photos via our website is often enough to resolve the problem. We are more than happy to provide suggestions.

It is also crucial to lubricate the hinges regularly. Applying an engineering lubricant that is light to the hinges is a great way to do this. We recommend using a lubricant that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It also decreases the possibility of a window getting stuck and stop corrosion. It is recommended to do this once a year. WD40 or other solvent-based oils should not be used since they could damage your upvc window repairs windows.

5. Draughts

Draughts can be caused by several different causes. The hinges can also become disaligned as a result of wear, creating gaps where the sash and frame meet. They can be repaired by giving them a thorough clean, however if they are beyond repair it may be necessary to get them aligned or replaced. In addition, the interlock could also become unbalanced. This happens on the hinge's side, and might require to be cleaned. In some cases it might be necessary to replace the hinges.

The second most frequent reason for draughts is window seals. These are prone to wear or damaged over time and let air escape through the gaps. This can be avoided by replacing them with high-quality weatherstripping. Another option is to replace the upvc window with low-emissivity glass. this will help to regulate indoor temperatures and will lessen draughts.

The last way to reduce draughts effectively is by using a Draught-exclusion device. These are usually fabric tubes filled with a filler that can be placed over your window sill. These will help to stop cold air from entering and keep your home warm and cozy!

With a little regular maintenance and repairs windows made of upvc will continue to provide an excellent level of insulation and security for your home. However, it is important to realize that all windows have a life span and eventually, they will reach an point at which it is more economical to replace them than fix them. If you are experiencing issues with your upvc window it is recommended to speak with an expert immediately.