• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are an excellent option for modern homes. They are long-lasting, durable and easy to maintain. As opposed to aluminium and timber they are not susceptible to get rusty or decay.

Cleaning and lubricating regularly UPVC windows and doors is vital. This will reduce unnecessary repair costs and also improve energy efficiency.

1. Broken Glass

The broken glass in your windows could cause significant damage to your home and even be fatal. It is essential to make sure that your windows are in good working order.

For single pane windows it can be relatively simple to replace windows, and the new one is usually able to fit into the old frame very easily. If windows with double glazing near me panes are held together by internal beading, window repairs it is difficult to remove and replace the panes that were previously in use. In this instance you'll need find some plastic spacers to aid the new pane in being able to fit perfectly into the window frame.

If you're planning to attempt to remove the window panes by yourself it is important to wear the appropriate safety equipment that includes gloves with a thick layer of material and eye protection. It is also an excellent idea to lay down a drop cloth before you start working on the glass so that any fragments of glass fall on the fabric instead of onto the floor, where they could be trodden under and cause further damage.

It's a great idea to cover the gap with tape after the glass has been removed. This will prevent drafts and water from getting into your home until a professional is able to fix the window. It also acts as a barrier, preventing any intruders to gain access to your home. If the gap is large, you may be interested in the security door with an integrated window as it will provide the best of both worlds.

2. Sagging

Upvc windows and doors are an affordable, durable and energy-efficient alternative to timber windows with sash. However, over time they can suffer from a variety of issues like sagging. A sagging window can cause problems with light, draughts, and even security. If you find that your uPVC window is beginning to lose its shape, it's important to act quickly to prevent the problem from getting worse.

To repair a window that is sagging, you can try to reposition the hinges. To accomplish this, you'll need open the window to get to the frame. Then, remove both the hinges at the top and bottom using a screwdriver, and then adjust them counter-clockwise or clockwise. Once you've adjusted the hinges, close the window and verify the fitting. If you are happy with the size of the window, you can tighten screws to hold them in place.

If you are unable to reposition the hinges, you could need to replace the seal. Rubber seals can dry out and lose their elasticity with time, which causes them to loose their elasticity. If this happens, it's important to replace the seal as quickly as possible so that your uPVC windows are waterproof and safe from drafts.

uPVC handles could also become loose. This is typically caused by screws that have been removed over time, but it can also be due to the handle mechanism getting worn out. It's a good thing that it's simple to fix the loose uPVC window handle yourself. First, you'll need to close the window and perform an experiment fitting. The joints at the corners of the sash must align with the joint on the casing. If it does not then you can use the screwdriver to loosen the handle. Then, turn the mechanism to position.

3. Water Leaks

If you're waking up to wet floors and mouldy walls every time it rains it's important to take action. Water leaks from windows are not just a cause for degradation of your home's structure but also undermine your efforts to control the temperature inside your home. The most common reason for leaking uPVC windows is that the sealant around the frame is damaged or not present.

This is a relatively easy fix that can be done by any DIY expert. Depending on how severe the issue is, old caulking might need to be removed. It is important to remember that when it comes to uPVC window repairs you should not be tempted to apply too much caulk in order to make the area more difficult to clean and can decrease the efficiency of your energy usage.

Make sure that the drainage holes are free of debris in them and that the sill pan has been properly angled to allow the water to drain from the window. In more serious cases you might need to consider replacing the window.

Mold spots and rotten sills are also signs of water leakage. This fungus thrives in conditions of dampness and can spread quickly throughout the house.

It is also important to remember that if the leakage originates from the glass of your double-glazed windows, it is more likely to be a problem with the glass seal rather than the frame or sagging. A uPVC specialist can fix this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges may be to blame if your uPVC window is difficult to open or it blows open with the breeze. They can be repaired by any DIYer who is skilled and can be completed in a matter of minutes.

Almost every household in the UK will have either top hung or side-hung uPVC windows that are hinged and, just like any mechanical component they can wear down over time. It's very simple to change the hinges on a window but it's much easier if someone else helps hold the frame.

It is also important to verify that the uPVC hinges are being opened and closed in the right direction. You can check this by checking for the arrows on each hinge, this indicates which way the window should open.

The problem can be caused by opening the window improperly or a faulty installation at the factory. Sending us a photo through our website can often solve the issue. We are happy to offer advice.

It is also essential to lubricate the hinges regularly. Applying an engineering lubricant that is light to the hinges is a great method of doing this. We recommend using the lubricant that doesn't contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can help the window to open and close more easily. It can also reduce the chance of windows sticking and prevent corrosion. Ideally, you should do this at least once a year. WD40 and other solvent based oils are not recommended because they will damage parts of your uPVC window.

5. Draughts

Draughts can be caused by a variety of different causes. The hinges may also become unbalanced due to wear, causing an opening where the sash and frame meet. If they're beyond repair, it may be necessary to get them re-aligned. The interlock may also become unbalanced. It is located on the hinge side and may need to be cleaned. In some cases, it may be necessary to replace these.

These seals are susceptible to wear and tear or become damaged over time, allowing air to escape. This can be prevented by replacing them with high-quality weatherstripping. Replace the upvc windows with low-emissivity glasses. This will help control indoor temperatures and lessen the risk of draughts.

One of the most effective ways to cut down on drafts is to use a draught excluder, these are usually fabric tubes filled with some type of filler. They can be put on top of your windowsill. These will keep your home warm by blocking out cold air.

With a bit of regular maintenance and repairs your windows made of upvc will provide excellent security and insulation for your home. It is crucial to keep in mind that all windows eventually get worn out and it could be more cost-effective to replace them than to repair them. If you have any problems with your Upvc window it is recommended to speak with a professional immediately.