• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

locked keys in car how to open Keys in Car? Here's How to Open Your Car Without Damage

Don't panic if you've locked the keys in your car. There are numerous ways to get around it before calling a locksmith, or a roadside assistance service.

For instance, you can make use of a shoelace that has a slip knot to tie up the post lock, or a coat hanger made of wire that you untwist and shape into hook. You can also use a door wedge or an inflatable wedge.

Pump Wedge

If you've been stuck in a car locked up and none of the DIY options like wire hangers, shoestrings or wedges are working for you then it's time to call in an expert. A locksmith or repo service provider could have special lockout equipment that will allow you to unlock your car without damaging it.

Make sure you use them correctly if they are available. Most importantly, know where to place the wedge tool. Many people place the wedge tool in the upper corner of a door, which is the most vulnerable. This is a bad move, as you may damage the weather stripping and wires inside the doors. Put the wedge where you can see the largest gap and also where the greatest leverage is.

The Pump Wedge is an inflatable wedge constructed of durable vinyl that will not scratch the surface. It slides between the door of the vehicle and the door frame. It is then inflated to create a space which allows you to slide in other tools, such as a long-reach tool rod for opening the car. It comes with a hook at the other end that you can make into a shape to hold the latch on the door handle.

A less expensive alternative is to use a pair of wooden door stops. You can use them to pry open the gap at the back of the door. You could also make use of a slim Jim which is a thin metal strip which is bent into a hook and used to attach the lock. This method isn't without practice however, as you need to be careful not to tear the door's weather stripping.

A shoelace is another good alternative, but it's only with older cars that don't have a button for the unlock mechanism. You can tie a knot in the middle and then move the lace upwards and downwards along the door seam until you spot the latch. After that, maneuver the lace until it catches the lock, tighten the slip knot and pull upward. This is a more difficult method and could scratch the paint on the door or scratch the trim if not careful.

Inflatable Wedge

If you have an inflatable wedge-shaped car door opener, you will be able to open your car without the need for prying or slim jim tools. These car door wedges can be inserted between the window and the frame of the vehicle and when they are inflated, opener they create a space sufficient to accommodate a long-reach tool such as a slim jim or a button grabber. This method is less dangerous than using a prying tool and can be used even when you don't have access a screwdriver.

A coat hanger made of wire that is shaped into a hook is another way to unlock the car without damaging its interior or exterior. It can be used to grasp the lock and may work better than the flat screwdriver as it is less likely cause damage to the paint on the car. However, it is important to inspect all the doors to make sure there is no other method to gain access.

You can also make use of a plastic bag that has been twisted into a noose or V-shaped shape. Be careful not to tear the bag, since it can make the situation worse. This trick is especially useful when you are unable to locate the lock button. It may not be as reliable as using an iron wedge or coat hanger however, it can be helpful when you are in an awkward situation.

The best tip we can offer you regarding being locked out of your car is to stay in a calm state and put safety first. There are many solutions to this issue. If you've read this article, you will be prepared for any situation that may occur. You can unlock your car by following our instructions. This will help prevent unnecessary stress and damage. If you are able, bring your keys when you leave your vehicle.

Shoelace

It's one of those "oh crap!" moments that can ruin a day. In a pinch it's a good idea to keep a few things on hand that can assist you in unlocking your car without damaging the windows. Certain of these items can be easily found and will help you save money on locksmiths, or the time required to get roadside assistance.

A shoelace, or even twine, is a great tool for unlocking the car. It's simple to use and will work on a wide range of vehicles. This method only works on cars with post locks. They can be placed vertically on the window sill and easily accessible from outside the car. To complete the task, use a shoelace to create a slip knot, then squeeze it into the gap between the frame of the window and the door. Once the slip knot is set, pull both ends of the string upwards in order to lasso the lock.

This method is more effective for older vehicles. It may not work with newer models with a hooked interior lock. If you have a screwdriver in your possession, it can be used to open the door more aggressively. You can also use a pole that you can pull from a nearby object, such as an old doorframe, or even a piece wood, to attach to the window frame. This will make room for a rod to push the locking button.

While the methods mentioned above may be somewhat safe for some drivers, it's best to seek assistance if you can. This will stop any further damage to the vehicle and it will also reduce the risk of an accident resulting from the stress of the situation. If you don't have a mobile phone or are unable to reach a helpline, it is important to always let trusted family members and acquaintances know where your vehicle is. A spare set of keys must be kept in a safe place on your vehicle.

Wire Hanger

There is no doubt that locking your keys in your car can be a stressful situation. The key is to stay calm and think about your options carefully. You can avoid making the situation worse if do not be in a panic.

You can also use a modified wire hanger for entry into your car. You'll need to uncoil the coat hanger until it has a straight slant and opener a hook that you can use to manipulate the lock rod inside of your door. Once you are able to reach the rod of your lock and you are in a position to pull it upwards and allow you to open the door.

You could also use a rod, or even a metal piece from your vehicle. It is important that you make sure you don't cause any damage to the vehicle in this procedure and it is ideal to do it without removing the car apart. This method will work better on older cars than on newer ones. However it can be utilized on models that have unique door handles.

You can perform the same trick with the shoestring tied in with a slip knot. This can also be done for a post lock however, it's somewhat more difficult to operate since you will depend on the tension of the string to grab the lock. It is possible to do this by threading a shoestring into the small hole in the weatherstripping of your vehicle's doors. After the string is in, you can pull it tight to form a loop that will snap around the lock, allowing you to pull it out. This method can be very effective if you're lucky enough to find the lock in the correct location.