• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is an excellent choice for modern homes. They are durable, long-lasting and easy to maintain. They are not susceptible to decay or rust as timber and UPVC Window Repairs aluminum.

Regularly cleaning and lubricating UPVC windows and doors is vital. This will prevent unnecessary repair costs and improve the efficiency of energy.

1. Broken Glass

If the glass in your window is broken it could cause a large deal of damage to your home, which can make it extremely dangerous and possibly fatal. It is important to make sure that your windows are in good working order.

For single pane windows it is fairly easy to replace windows, and the new one will usually fit inside the frame that was previously installed easily. If you have double-paned windows that are held together by internal beading, it is more difficult to remove and replace the panes that were previously in use. In this instance you'll need to find some plastic spacers to assist the new pane to fit properly into the window frame.

Wearing protective eyewear and thick gloves is essential when you are planning to remove the glass by yourself. It is also recommended to lay down a drop cloth prior to when you begin working on the glass, so that any fragments of glass fall on the fabric instead of onto the floor where they could be trampled upon and cause further damage.

It's a great idea cover the gap with tape after the glass has been removed. This will stop water and drafts from entering your property until a professional comes out to fix the window. This will also act as a barrier that will prevent any intruders from gaining entry to your home. If the gap is large, you may think about a security door that has an integrated window, since this will offer the best of both worlds.

2. Sagging

uPVC windows and doors are an affordable, durable and energy-efficient alternative to timber windows with sash. However, over time, they are susceptible to a range of issues like sagging. A window that is sagging can cause problems with light, draughts and even security. It's important to take action as soon as you notice your uPVC windows are sagging.

To fix a window that is sagging you can try to reposition the hinges. To accomplish this, you'll have to open the window to get to the frame. You can then unscrew both the hinges on the top and bottom using a screwdriver and adjust the hinges clockwise or counter-clockwise. Close your window to check the fit after having repositioned your hinges. If you are happy with the size of the window, you can tighten screws to hold them in the right position.

If you cannot reposition the hinges, you could need to replace the seal. Seals made of rubber can dry out and lose their elasticity over time, leading them to loose their elasticity. If this happens, it's essential to replace the seal as quickly as you can to ensure that your uPVC windows are waterproof and draught-proof.

uPVC handles may also become loose. The majority of the time, this is caused by screws that have become loose over time. However, it could also happen because the handle mechanism has worn out. It's a good thing that it's simple to repair a loose uPVC window handle yourself. First, you'll need close your window and do an initial test fit. The corners of the sash need to be aligned with the casing joint. If it isn't then you can use a screwdriver or a wrench to loosen the handle, and then turn the mechanism back into the position it was in.

3. Water Leaks

It is essential to take action if you get up each morning to find mouldy walls and wet floors. The leaks of water through windows could cause structural damage to your home and also impact your ability to regulate the temperature in your home. The most common cause for leaking uPVC windows is that the sealant surrounding the frame has been damaged or missing.

It is a fairly easy fix and should be undertaken by any DIY expert. Depending on how serious the issue is, the old caulking might need to be removed. It is crucial to remember that when it is about uPVC window repairs, do not be tempted to 'over-caulk and then make the area harder to clean and could decrease the efficiency of your energy usage.

Verify that the drainage holes do not have debris in them, and also ensure that the sill pan has been properly angled to allow the water to drain from the window. In more severe instances, you may need to replace the window.

Moldy sills and rotten ones are also signs of water leakage. This fungus thrives under conditions of dampness and can spread quickly throughout the house.

It is also important to note that if the leakage is coming from between the glass of your double glazing-glazed windows it may be more likely to be an issue with the glass seal, rather than the frame or sagging. It is also possible to be repaired by a uPVC window expert who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be the reason if your uPVC window is difficult to open or it opens with a breeze. These are easily replaced by any competent DIYer and are usually completed in just a few minutes.

Nearly every home in the UK will have either top hung or side hung uPVC windows that use hinges and, just like any mechanical component they will wear out over time. It's easy to change the hinges on a window, but it's easier if someone helps you to hold the frame.

Verify that the uPVC hinges are open and closed in the correct direction. Look for the arrows on each hinge to determine which direction the window should be opened.

Window hinges that aren't working properly could be the result of incorrectly opening the window a certain manner or because of inadequate installation at the factory. Sending us a photo via our website is often enough to resolve the problem. We are more than happy to offer assistance.

Regular lubrication of hinges is also essential. Applying an engineering lubricant that is light to the hinges is an ideal way to do this. We suggest using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It can also reduce the possibility of a window getting stuck and stop corrosion. This should be done at least every year. WD40 and other solvent-based lubricants are not recommended as they could damage parts of your uPVC window.

5. Draughts

Draughts can be caused by several different causes. First, the hinges because of wear and tear, could become misaligned. This causes a gap to form between the sash and the frame. These can be easily fixed by giving them a thorough clean, however when they're beyond repair, it may be necessary to have them aligned or replaced. The interlock may also become misaligned. This is located on the hinge side and might require to be cleaned. In some cases it might be necessary to replace these.

The next common reason for draughts are the window seals. They are prone to wear or damaged over time, and will allow air to escape through these gaps. This can be avoided by replacing them with high-quality weatherstripping. Another alternative is to replace the window with low-emissivity glass. this will help in regulating indoor temperatures, and also reduce the risk of draughts.

The final method to cut down on the amount of draughts is to use a Draught-excluder. These are usually made of fabric tubes filled with a filler, which can be placed over your window sill. These will help to stop cold air from entering and keep your home warm and cozy!

The windows made of upvc can keep providing excellent insulation and security to your home with regular maintenance and repairs. However, it is important to recognise that all windows have a lifespan and they may reach the point when it's more efficient to replace them than repair them. If you encounter any issues with your window made of upvc you should consult an expert as soon as possible.