• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Glazing Repairs

Repairing your glazing correctly can increase the value of your home. It is also a way to ensure that your door or window is operating as well as it can, increasing its overall performance.

However, it can be tricky to know whether the issue you're experiencing is one that needs professional repair. Here are a few of the most frequent problems that require to be addressed:

Damaged Seals

Window seals are an essential element of your glazing system. They secure the windows, insulate them and seal against outside air and moisture. They are designed to last for a long time, however, the reality is that they could require repair or replacement at some moment. The good news is that there are many options for repairs in accordance with your budget and timeframe.

Fogging inside your double paned insulated glass unit is among the most frequent signs that the window Doctor seals are failing. Foggy windows result from a damaged seal between the two glass panes of your IGU that allows moisture to be absorbed, causing condensation. While you can try some quick-fixes to defog your windows, like using a steamer, or applying window putty, the best solution is to repair your window seals by an expert.

In addition to allowing fogging and condensation between the window panes, a faulty seal will also cause your windows to lose their insulating value. The space between the two panes of glass is filled with an inert gas such as xenon or argon which help the IGU resist heat transfer and keep the heat in the home. The benefits of the IGU's insulation will be lost if the window seal fails. Your costs for energy will also increase.

As time passes, rubber gaskets will begin to lose their elasticity due to aging and exposure. The process can be accelerated by improper treatment or environmental factors such as UV radiation. If not addressed, this can cause water intrusion into the building envelope, resulting in mold and mildew. This can cause damage to the frame and sash of your IGU and cause a shabby appearance and weakening the insulation.

Avoiding common mistakes and performing regular maintenance are the best ways to avoid window seals breaking down. For instance, do not use high-pressure washers to clean your windows since it could work its way into the sash, and damage the seal. Don't apply reflective film to your window that is insulated, because it could void the guarantee and damage the sealant. Be cautious when using chemicals such as paint strippers because they can damage the sealant and cause it to fail.

Broken Glass

Broken glass is a concern that requires immediate attention. A glass pane that has broken in a window may fall and break other windows, or create drafts and possibly water or insects to enter your home. A glass pane that has been broken could pose a risk to anyone who comes into contact with it. This is especially true for pets and children. In addition to being a risk for safety broken glass can be difficult to remove and could cause additional damage to frames, sash and other surfaces.

The first step to take when a window has damaged is to wrap it up with a cross-pattern of duct tape to stop further shattering. This will keep insects, rain and other debris out of your house until you can replace the glass. This method is particularly important for upper-story window.

Wear thick, cut-resistant gloves. Also, wear eye protection. With a putty or pliers, pry old glazing points from the recesses of the frame. After the glass has been removed, wash the areas around it to prepare for the new replacement window.

After determining the window's opening, it is important to ensure the new replacement is precisely the right size. Most glaziers will have standard-sized panes on hand however, if energy-efficient glass or Window doctor safety glass is required, it may need to be cut to fit your frame. To avoid committing mistakes make sure you measure the opening of your window and subtract 1/8 to 1/4 inches for the new pane.

Once you're ready to put in the new glass, place it carefully into the frame and check for a flush fit to the rabbets holding it. A glass pane too large could cause the wood to expand, and a pane too small could fall out of the frame, or allow drafts in.

Once the new pane is secured, you can wrap another piece of glaziers' compound around the perimeter of the pane to seal the glass to the frame and the sash. Smooth the compound with your fingers, making sure it's even all around the new pane. When dry, paint the newly glazed compound and frame to match the rest of your window.

Structural Issues

The structural strength of curtain wall frameworks and systems for framing is vital to the security and performance of glazed surfaces. In an inspection, a professional examines fasteners, anchor points, and supports for signs of corrosion, deterioration, or misalignment. The inspector also examines the sealants and gaskets to make sure that they are properly installed and that they are not leaky.

Structural issues that must be addressed include rusted frames as well as sagging walls. These problems can be very hazardous and could result in serious damage over time. It is important to take care of any structural issues as quickly as possible to avoid costly repairs down the line.

Curtain wall systems need extensive structural support in order to withstand wind loads and other stresses. If these components fail, the water intrusion that results can be damaging and costly. The root causes of these failures are due to inadequate construction, design mistakes, and inadequate installation.

Warping can also result in distortion or deformed panels which can impact the appearance, energy efficiency and safety of the system. A glass inspector will look for warping during an inspection and recommends repair steps if required.

Glazing inspections should start by making sure the work area is free of obstructions and all workers are wearing the appropriate safety gear. This includes gloves, hard hats and high-visibility vests. It's also recommended to use a ladder and harness to gain access to higher or difficult-to-access areas.

Common upvc repairs for windows made of wood are missing or damaged hardware. A few minor cracks in window frames made of wood can be fixed with two-part epoxy, however rotted or severely damaged wood is usually best replaced. Sliding sashes stuck in their tracks can be loosened by sanding them and applying graphite grease. Aluminum window companies are usually the ones who handle more complicated issues, such as replacing sliding mechanisms or major frame or sash elements.

The cost of replacing an existing curtain wall system is usually higher than the cost of rehabilitation, however the energy savings as well as the increased comfort for people living in the structure could let the initial investment be returned. A replacement system can also help bring an existing structure in compliance with the more stringent requirements of building codes for insulated glass and wind load resistance.

Sash Issues

Visual inspections can help diagnose and resolve a number of sash window problems. A professional assessment of the window can detect issues like rotting wood or paintwork damage, as well as broken glass, which will ensure that the window is in good order to be used in the future. Luckily, the most common problems are less serious and don't require replacement.

Problems such as a sash that doesn't close or open can be annoying and affect the energy efficiency of your home. Your windows can also be dangerous if they suddenly close shut. This can cause injuries, property damage, and even a loss of heat or air conditioning.

Regular maintenance is required to keep sliding sash windows looking nice and operating properly. Cleaning your sash windows and spraying them with lubricant can aid in opening and close more easily. However, if the issue persists, it could be a sign that the balances aren't working correctly or that something is wrong with the sash itself.

Over time wooden window sashes absorb moisture and are affected by the fluctuation in humidity levels. They can expand and shrink, which could cause them to become stuck or jammed within the frame. This can be prevented by maintaining a tight seal on the wood and regularly applying a sash sealer or painting to guard against moisture.

Other issues with sash windows include a damaged cord displacement, lock and nail jamming. These issues make it difficult to open and close windows in sash. A carpenter can resolve these problems by removing the sash, replacing or repairing any damaged parts, before reconnecting them.

Stained glass windows may be stained to restore their appearance. It is crucial to keep their condition to prevent water ingress and rot, as well as other issues that can occur when the paint begins to peel and crack. Re-leading stained glass is an additional method to prevent it from leaking into surrounding wood and causing decay.