• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is a great option for modern homes. They are easy to maintain, durable and long-lasting. In contrast to aluminium and timber, they do not corrosion or rot.

It is important to clean and oil UPVC windows and Repairs to uPVC Windows doors regularly. This will reduce unnecessary repair costs and improve energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it could cause a large amount of damage to your home, which can make it very dangerous and potentially fatal. It is important to ensure that your windows are in good shape.

For single pane windows it can be relatively simple to replace windows repair, and the new one is usually able to fit into the old frame very easily. If you have double-paned windows which are joined by internal beading, it is harder to remove and replace the panes that were previously in use. In this case it is essential to purchase plastic spacers in order to help the new pane fit into the window frame.

If you're planning attempt to remove the window panes by yourself it is crucial to wear the appropriate safety equipment such as gloves that are thick and eye protection. You should also lay down a drop cloth before you begin working on the window panes so that any shards of glass fall onto the fabric and not onto the floor, where they could be trampled.

Once the glass has been removed from the window, it's best to seal the gap with packaging tape or duct tape to block water and drafts from entering the property until a professional is able to come out and repair the window. This also serves as an obstruction to prevent criminals from getting into your home. If the gap is large, you might want to consider using the security door with an integrated window as it offers the best of both worlds.

2. Sagging

Upvc windows and doors are an affordable energy-efficient, durable and long-lasting alternative to timber windows with sash. As time passes, they may be affected by a variety of issues, including sagging. A window that is sagging can cause problems with light, draughts or even security. If you find that your uPVC window is beginning to lose its shape, it is important to act swiftly to prevent the problem from worsening.

Repositioning the hinges could help fix a window that is sagging. To accomplish this, you'll need to open the window so that you can get to the frame. Then, remove both the hinges at the top and bottom with a screwdriver and adjust them counter-clockwise or clockwise. After you've repositioned the hinges, shut your window and check for an appropriate fit. If you're happy with the fit, tighten the screws to ensure they stay in the right place.

If you are unable to move the hinges, you might need to replace the seal. As time passes, rubber seals lose their elasticity and become dry and cause them to loosen. If this happens, it's essential to replace the seal as fast as possible so that your uPVC windows are watertight and secure from draughts.

uPVC handles can also become loose. Often it is due to screws that have become loose over time. However, it could also happen because the handle mechanism has been worn out. It's relatively easy to fix a loose uPVC handle. The first step is to close the window and perform an initial test to ensure that it fits. The joints at the corners of the sash should align with the joint on the casing. If it isn't you can use a screwdriver to loosen up the handle. Then, turn the mechanism into position.

3. Water Leaks

If you wake up to wet floors and mouldy walls each time it rains it is important that you take action. Windows that leak water do can not only cause degradation of your home's structure but also hinder your efforts to regulate the temperature within your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.

It is a fairly easy fix that can be completed by any DIY expert. Based on the severity of the problem the caulking that was used up may require removal before a new layer can be applied. When it is time to uPVC repair, you must avoid 'over-caulking'. This will make your window more difficult to clean and reduce its energy efficiency.

It is essential to ensure that the drainage holes are free of debris and that the sill pan is placed properly so that it drains away from the window. In more serious situations, you might need to consider replacing the window.

Mold spots and rotted sills are other signs of water leakage. The is a fungus that thrives in damp conditions and can quickly spread across the home.

If the leakage is occurring between the double-glazed glass, it is more likely the problem is with the seal than the frame. This can be easily corrected by a uPVC window expert who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be the reason when your uPVC window is difficult to open or it blows open with an ease. Anyone who is a skilled DIYer can fix these in a matter of minutes.

Like any mechanical component, hinges can be damaged over time. It is very easy to change a window hinge, but it's easier if someone helps you hold the frame.

Make sure that the uPVC hinges open and close in the proper direction. Look for the arrows on each hinge to determine which direction the window should be opened.

The problem with the hinges on windows could be the result of incorrectly opening the window in a certain way or due to improper installation in the factory. Sending us a photo via our website will often solve the issue. We are more than happy to provide advice.

It is also crucial to grease the hinges on a regular basis. This can be accomplished by applying a light engineering oil on the hinges. We suggest using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It can also reduce the chance of windows sticking and prevent corrosion. This is recommended to be done at least once a year. WD40 or other solvent-based lubricants should not be used as they can cause damage to your uPVC windows.

5. Draughts

Draughts can be caused by a variety of different factors. The hinges can also become misaligned due to wear, which can cause a gap where the sash and frame meet. If they're beyond repair, it may be required to realign them. Secondly the interlock, this is located on the hinge side of the window and can also become misaligned, again it is possible to just give them a clean but in certain cases, it may be necessary to have these replaced.

The second most frequent reason for draughts is window seals. They are prone to wear or damaged over time, and let air escape through these gaps. This can be prevented by replacing them with high-quality weatherstripping. Another alternative is to replace the upvc window with low-emissivity glass. which will help regulate indoor temperatures and again will lessen the possibility of draughts.

The final method to cut down on drafts effectively is to use a draught-excluder. These are usually fabric tubes filled with a filler which can be placed over your window sill. They will keep your home warm by blocking cold air.

The windows made of upvc can continue to provide excellent insulation and security to your home with a little regular maintenance and repairs. It is important to remember that all windows eventually get worn out and it may be more cost-effective to replace them than to repair them. So, if you're experiencing problems with your upvc windows, Repairs to uPVC Windows it is always best to seek professional assistance as soon as possible.