• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is an excellent option for modern homes. They are easy to maintain, durable and long-lasting. Unlike timber and aluminium, they do not rust or rot.

Cleaning and lubricating regularly UPVC windows and doors is essential. This will prevent unnecessary repair costs and improve the efficiency of energy.

1. Broken Glass

The broken glass in your windows could cause serious damage to your home and may even be fatal. It is essential to take the time to ensure that you're doing everything you can to keep your windows in good repair.

Single-pane windows are relatively simple to replace, and they generally fit into old frames very easily. However, if you have double glazed windows repair pane windows that are anchored by internal beading, it'll be more difficult to take out the panes that are in place and replace them with new ones. In this situation you'll need locate some plastic spacers that help the new pane to fit perfectly into the frame of the window.

Wearing eye protection and thick gloves is essential if you plan to remove the glass yourself. It is also recommended to lay down a dropcloth before you begin working on the window panes, so that any shards fall onto the fabric and not on the floor which could cause them to be trampled under.

It's a great idea to tape the gap once the glass has been removed. This will stop drafts and water from getting into your home until a professional comes out to repair the window. It also acts as a barrier, preventing any intruders to gain access into your home. If the gap is large, you may be interested in a security door that has an integrated window repair near me as this will offer the best of both worlds.

2. Sagging

uPVC windows and doors are a cost-effective, durable and energy-efficient alternative to timber sash windows. However, Repairs to uPVC Windows over time they can suffer from a variety of issues like sagging. A sagging uPVC window could cause issues with light, draughts and even security. If you notice that your uPVC window is beginning to lose its shape, it's crucial to act fast to stop the issue from becoming worse.

Repositioning the hinges can aid in fixing a window which is sagging. To do this, you'll have to open the window so that you can get to the frame. Then, using the screwdriver, you'll be able to unscrew the hinges at the top and bottom and adjust them by turning them clockwise or anti-clockwise. Once you've adjusted the hinges, close your window and test it for an appropriate fit. If you're happy with the fit, tighten the screws to ensure they stay in position.

If you are unable to reposition the hinges, you may require replacing the seal. As time passes, rubber seals lose their elasticity and dry out which causes them to lose tightness. If this happens, it's essential to replace the seal as quickly as possible to ensure your uPVC windows remain watertight and draught-proof.

uPVC handles can also become loose. This is typically caused by screws that have become undone over time, but it could also be due to the handle mechanism wears out. It's relatively easy to fix a loose uPVC handle. First, you'll need to close the window and then perform an initial test fit. The joint at the corner of the sash should be aligned with the joint on the casing. If it doesn't, you can use a screwdriver to loosen the handle and return the mechanism to its original the position it was in.

3. Water Leaks

If you awake to damp floors and mouldy walls each time it rains, it's crucial to take action. Windows that leak water do can not only cause destruction of your home's structure but also undermine your efforts to regulate the temperature in your home. Most often, uPVC window leaks are caused by a damaged or missing sealant.

This is a fairly simple fix and should be undertaken by any DIY expert. Based on the severity of the problem the caulking used previously may require removal before a new layer is applied. When it is time to uPVC repair, you should avoid over-caulking. This will only make your window harder to clean and reduce its energy efficiency.

Verify that the drainage holes have no debris in them and ensure that the sill pan has been angled correctly to drain away from the window. In more serious instances, you might need to consider replacing the window.

Mold spots and rotten sills are also signs of water leakage. The is a fungus that thrives in damp conditions and can quickly spread throughout the home.

If the leakage is occurring between the double-glazed glass it is more likely that the issue is with the seal than the frame. It is also possible to be corrected by a uPVC window specialist who will replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be at fault for the reason that your uPVC window is difficult to open, or if it blows open with the breeze. They can be easily replaced by any competent DIYer and are usually completed in just a few minutes.

Like all mechanical parts hinges are prone to be damaged over time. The process of replacing a hinge on a window is an easy process, but it's easier when you have a person to help hold the frame up.

Check that the uPVC hinges are closed and open in the right direction. Look for the arrows that are on each hinge to determine the direction in which the window should be opened.

The problem can be caused either due to opening the window in the wrong way or due to a poor installation at the factory. Sending us photos via our website will often resolve the problem. We are more than happy to give advice.

Regular lubrication of the hinges is essential. Applying an engineering lubricant that is light to the hinges is a great way to do this. We suggest using the lubricant that doesn't contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can help the window to operate and close more easily. It also decreases the chance of windows sticking and help prevent corrosion. It is recommended to perform this every year. WD40 and other solvent-based oils are not recommended because they can damage the parts of your uPVC window.

5. Draughts

Draughts can be caused by different factors. The hinges, also because of wear and tear, could become misaligned. This will cause an opening to appear between the sash and the frame. This can be easily fixed by giving them a thorough clean, however in the event that they are beyond repair it could be necessary to get them realigned or replaced. The second is the interlock, which is located on the hinge of the window, can also become misaligned, again it may be possible to just give them a thorough clean, however in certain cases, it may be necessary to have them replaced.

The next most common cause of draughts is the window seals. They are susceptible to being worn out or damaged over time, and let air escape through the gaps. Replacement of these with high-quality weatherstripping is a good way to prevent draughts. Another alternative is to replace the window with low-emissivity glass, which will help regulate indoor temperatures and will reduce draughts.

Another method of reducing drafts effectively is to use a Draught-excluder. These are usually fabric tubes filled with a filler, which can be hung over your window sill. These will keep your home warm by blocking out cold air.

Your windows made of upvc will keep providing excellent insulation and security for your home with a little regular maintenance and repairs. It is essential to remember that all windows eventually become worn out, and it is more cost-effective to replace them than to repair them. If you encounter any issues with your Upvc window, it's best to consult an expert as soon as possible.