• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are an excellent choice for modern homes. They are long-lasting, durable and easy to maintain. In contrast to aluminium and timber, they do not get rusty or decay.

It is important to clean and oil UPVC windows and doors on a regular basis. This will help prevent unnecessary repair costs and also increase energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it could cause a large deal of damage to your home, which can make it very dangerous and potentially fatal. It is essential to take the time to make sure that you're doing everything you can to ensure that your windows are in good condition.

For single pane windows, it is relatively easy to replace windows, and the new one will generally fit within the old frame very easily. If windows with double panes are held together by internal beading, it will be difficult to remove and replace the panes that were previously in use. In this situation it is essential to purchase plastic spacers to make sure that the new pane fits into the window frame.

Wearing eye protection and heavy gloves is a must for anyone who plans to remove the glass by yourself. It is also recommended to lay down a drop cloth before you begin working on the window panes so that any shards fall on the fabric, not onto the floor and could be trampled under.

It's a good idea to cover the gap with tape after the glass has been removed. This will prevent drafts and water from getting into your home until a professional comes out to fix the window. It also acts as a barrier to prevent any criminals from getting into your home. If the gap is large, you might be interested in an alarm door that comes with an integrated window, as it will provide the best of both worlds.

2. Sagging

upvc window repairs is a long-lasting energy-efficient, cost-effective and economical alternative to timber sash window. However, over time they are susceptible to a range of issues, including sliding. A sagging window in uPVC could cause issues with light, draughts, and even security. If you notice that your uPVC window is beginning to shrink, it is important to act swiftly to prevent the problem from getting worse.

To fix a window that is sagging you can try repositioning the hinges. First, you'll need to open the windows so you can access the frame. You can then unscrew both the hinges at the top and UPVC Window Repairs bottom using a screwdriver, and then adjust them counter-clockwise or clockwise. Once you've adjusted the hinges, shut your window and check for fitting. If you're happy with the fit, you can tighten the screws to ensure that they remain in the right place.

If you can't reposition the hinges you may require replacing the seal. Rubber seals may dry out and lose their elasticity with time, leading them to loosen. It is important to replace your seal as soon as you can to keep your uPVC window watertight and draughtproof.

uPVC handles could also become loose. The majority of the time this is due to screws that have come loose over time. However, it can be due to the fact that the handle mechanism has worn out. It's relatively easy to fix a loose uPVC hand. First, you'll need to shut the window and then perform an experiment fitting. The joint at the corners of the sash should be aligned with the joint on the casing. If it doesn't then you can use a screwdriver or a wrench to loosen the handle, and then reverse the mechanism back into position.

3. Water Leaks

It is crucial to take action if you awake each day to find mouldy walls and wet floors. Water leaks from windows not only lead to the destruction of your home's structure but also undermine your efforts to control the temperature within your home. The most common cause for leaks in uPVC windows is that the sealant around the frame has been damaged or is missing.

This is a fairly simple fix that can be done by any skilled DIYer. Based on the severity of the issue the caulking that was used up might need to be removed before a new layer can be put on. It is crucial to remember that when it is about uPVC window repairs, do not be tempted to 'over-caulk and then make the area more difficult to clean and decrease the efficiency of your energy usage.

It is crucial to make sure that the drainage holes are clear of debris and that the sill pan has been angled properly so that it drains away from the window. In more extreme instances, you may need to replace the window.

Mold spots and rotted sills are other signs of water leakage. The fungus thrives in damp conditions and can quickly spread throughout the house.

If the leakage is occurring between the double-glazed window, it is more likely the issue is with the seal than the frame. This can be easily fixed by an uPVC window specialist who will replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or loose and blow open in a breeze It could be hinges that are at the fault. They can be repaired by any DIYer who is skilled and can usually be completed in just a few minutes.

Most households in the UK will have top-hung or side hung uPVC windows that have hinges and, like all mechanical parts, they will wear out over time. The process of replacing a hinge on a window is an easy process, but it's simpler with someone else to help you hold the frame up.

It is also worth checking that the uPVC hinges are opening and closed in the correct direction. You can do this by looking for the arrow on each hinge, this indicates the direction in which the window should be opened.

Window hinges that aren't working properly could be the result of incorrectly opening the window a certain manner or because of poor installation at the factory. It is usually possible to fix the issue by sending us a photo via our website and we will be more than happy to give you suggestions.

Regular lubrication of hinges is also essential. Applying an engineering lubricant that is light to the hinges is a great method of doing this. We recommend using an oil that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can allow the window to operate and close more easily. It also helps prevent corrosion and decrease the chance of sticking. It is recommended to do this at least once a year. WD40 and other solvent based fluids are not recommended since they could damage parts of your uPVC window.

5. Draughts

Draughts in windows made of upvc can be caused by a variety of various factors. The hinges may also become unbalanced due to wear, creating an opening where the sash and frame meet. If they're beyond repair, it may be necessary to get them re-aligned. The second is the interlock, which is on the hinge side of the window, can be misaligned. Again, it's possible to give them a good clean, but in some instances it could be necessary to get them replaced.

These seals are susceptible to wear and tear or be damaged over time, allowing air to escape. Replacement of these with high-quality weatherstripping is a good way to stop draughts. Another option is to replace the upvc window with glass that is low-emissivity, this will help in regulating indoor temperatures and will reduce draughts.

The final method to cut down on the amount of draughts is to use a Draught-excluder. These are usually fabric tubes filled with a filler that can be hung over your window sill. They can help stop cold air from entering and keep your home warm and cozy!

Your windows made of upvc will keep providing excellent insulation and security to your home with a little regular maintenance and repairs. It is essential to remember that all windows will eventually get worn out and it may be cheaper to replace them rather than repair them. If you have any problems with your upvc window it is recommended to speak with a professional immediately.