• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Sash Window Repair

Sash windows could be out of balance, or even break. Pam is on the lookout on the internet for salvaged wavy glasses, and keep an eye out for installed discarded sashweights made of metal. She then searches for replacements, like washers or nuts to help balance her window.

Pam beds each pane with a rope of glazing compound she works into the rabbet groove, or pocket, that is around the opening. This reduces drafts and prevent costly heat loss.

Sashes that stick Sashes

It's a nightmare when your double glazed window repairs-hung windows become stuck. You'll lose sight if they rattle during a thunderstorm. A window that's too loose could let air and noise in which could increase your energy bills. Both of these scenarios are not ideal, but they can be rectified by using the proper tools and persistence.

A common problem with old windows with weighted sash is that paint can build up in the channels they slide on, making them jam. Most of these problems can be solved by cleaning and oiling the tracks.

Remove the caulking that was used in the space between the window stop (the one on the inside) and the frame of the window. Scrape off any paint that has built up. Make sure you employ a sharp blade and then set up sheets of plastic and a vacuum cleaner directly below to keep any paint dust and chips.

Then, clean the tracks with a dry cloth and apply a silicone lubricant to ensure better sliding. It is available in most home improvement stores, or online. You can test it by dragging the sash upwards or downwards.

If it still jams, there could be a problem with the sash cord. Check to see whether the cord is caught or hanging in the sash, or if it has snapped completely. You'll have to re-cord your window in the event of this.

A pin that keeps the rail in place may have fallen out. It isn't easy to fix and you will require the help of a professional most of the time.

If a pin isn't falling out but the wood has become swollen or warped, it's a good idea use a wood hardener on it. The liquid is quick drying and can help restore damaged wood. It's not necessary to take out the windows on your sash to repair them. Once you've used it, you should be able to pry the two sashes apart by placing a piece of wood on top of the bottom corner where they meet, and tapping it lightly using an hammer.

Draughts

Draughts can be a problem when you have an old sash window particularly in the winter. Most often, they are caused by decayed timbers cracks, cracked putty, deteriorated sash cords or unbalanced weights which can allow cold air to get into the window, making it difficult to keep your home warm. There are some things you can do to help prevent draughts in your windows with sash, for example, filling any gaps with foam that expands or strips to prevent draughts. These can buy at most hardware stores. They're effective, but they will require replacement periodically as the foam expands over time with use.

A more permanent solution is Gapseal which is a spongy rubbbery seal that you cut to the desired size and then put into the gaps between the sash window frame. It can be applied on its own or with adhesive strips placed on the bottom and top of the frame. This is a bit costly and will need to be reapplied over the duration of your window's lifespan, but it is a long-term solution and is simple to remove if you want to open the window.

Another popular DIY solution to stop drafts is to use cling film that is scrunched up and pushed into all the gaps around your window. This is a great draught stopper, but the drawback is that it can block sash travel completely and could pose risky for fire. Additionally, the sash will need to be removed for you to re-open the window and the cling film has to be reapplied each time you close the sash.

A better option is to have your windows draught-proofed as part of a comprehensive refurbishment service. This could include new sash cords as well as parting beads, staff beads, lubrication for the pulley wheels and rebalancing the weights, as well as staining or painting the frames and sashes. This will help restore the function of the sash, and increase its energy efficiency, while also dealing with any minor timber imperfections. It's less disruptive than removing windows and can help reduce draughts, improve thermal performance and significantly reduce costs.

Decay

The good thing is that your sash window frames are not damaged beyond repair even if they have been damaged or degraded. The timber used to construct the frames of these windows is generally of very high-quality and, with proper restoration, they can be restored to provide an excellent level of performance for a long time. Regular inspections are essential, as is ensuring the wood is properly ventilated. This will help prevent the accumulation of moisture that can lead to wood rot.

Most of the problems you will face with sash windows are evident upon close inspection, but some are harder to spot. Wood decay is particularly difficult to treat, since the fungus consumes the wood. While it is possible to repair wood that is rotten however the best method to avoid future rot is by keeping the timber dry.

First, remove any paint from the hardware. The bottom rail and the connecting rail could require removal from the frame (depending on the position of your sash). The next step is to remove the "pocket covers" that are pieces of wood on the side of the frame that are low down that give access to the weights (the parting beads run down the middle of them). You may need to use a sharp knife to remove them if they are painted or nailed into place. After the pockets have been removed, you can start slicing out any wood decay and apply an extremely high-quality water-resistant filler. After the filler has dried, the primer must be applied to prevent further decay.

It is a good idea to examine inside the window the sashweights to ensure they are balanced. They shouldn't be displaced or pulled one side more than the other. If they're not balanced, the sash can drop off its track and could break or damage the frame. The sash weights can be replaced with new ones or a new balancing mechanism can be installed that will stop the sashes from bouncing to the wrong side of the window frame.

Poor Security

As time passes sash windows are exposed to the elements and prone to deterioration due to weather and general wear. This can lead to decay of the timber, which requires replacement. Water marks on the window or on a softened frame could indicate decay of the wood. It is crucial to speak with an expert to evaluate the situation, and determine if any repairs to the window sash are needed.

Over time the rails on the bottom may also be damaged. This can be spotted by the presence of water marks on the sill, or the window becoming soft to touch. A professional consultation will also be required to assess the situation and recommend any resealing or replacement of the sash window's components.

Double and triple glazed Sash windows do an incredible job at keeping noise from entering your home, so it can be a major cause of worry if they begin to let it in. If this happens the structural integrity of the sash windows may be in danger and will likely need to be replaced by a different option.

A typical sash window repair problem is when the sash gets stuck in the frame. This could be caused by an sash cord that has snapped or a sign of a problem with the sash's the ratchets. If the latter is the case, then a bit of gentle persuasion is usually enough to get the window open again - or alternatively, the ratchets need to be reset.

Removal of the sash from the frame and clearing the tracks of any dust or dirt can often aid in resolving this problem. After the tracks have been cleaned remove any security fittings that could be present and then carefully taking off the sash cords and chains will allow the sash to be removed. A draught seal could be put on the staff bead in order to reduce the appearance of the paint finish. Decorators caulk can be used to fill the gap between the sash's box and the sash. This will improve the sash's operation and decrease draughts.