• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Sash Window Repair

Sash windows can go out of balance and even break. Pam searches the internet for salvaged Wavy glass, wavy glass, and keeps an eye out for discarded, metal sash weights. She then searches for replacements in the form of nuts or washers to help balance her window.

Pam will set each pane by putting the glazing material in a rope into the rabbet groove or pocket around the opening. This reduces drafts and prevent costly heat loss.

Sashes that stick Sashes

If your double glazing windows repair-hung windows get stuck in the middle, it's an absolute nightmare. They'll rattle in the event of an icy storm and you'll lose your view. A window that is too loose could let air and noise in which could increase your energy costs. Both of these scenarios are not ideal however they can be rectified by using the right tools and persistence.

Paint can build up on the channels of old weighted window tracks, which can cause them to block. Luckily, most issues with this can be solved through cleaning and lubricating the tracks.

Remove the caulking that was used in the space between the window stop (the one on the inside) and the frame of the window. Scrape off any paint that has built up. Make use of a sharp knife, and place plastic sheets and a dust-collecting vacuum cleaner below the surface to catch any paint dust or chips.

Then, clean the tracks with a dry cloth and apply a silicone-based lubricant for more smooth sliding. It is available at many home improvement stores or online. Then, you can move the sash up or down to test it.

If it continues to jam it could be due to an issue with the sash cord. Examine the sash cord to determine if the cord is caught or hanging from the sash, or has snapped off completely. It is necessary to re-cord the window If this is the case.

Another reason for a jam is that a pin that holds the meeting rail in place has fallen out. This isn't easy to repair, and you'll have to consult an expert in most cases.

Make use of a wood hardener if the wood is swollen and warped but there's no pin. The liquid is quick drying and can help restore damaged wood. You won't have remove your sash windows to repair them. After using it, you'll be able break the two sashes by placing a piece of wood on the bottom corner where they meet, and tapping it lightly using the Hammer.

Draughts

Draughts can be a major issue for old sash windows particularly during winter months. They are often caused by rotten wood or cracked putty, worn weights, or sash cords that are not balanced which can let cold air seep into the window and make it difficult to keep your home warm. You can reduce the risk of drafts by filling the gaps with expanding foam or by using draught-proof strips that are available at most hardware shops. They're effective however, you will need to replace them periodically as the foam expands with use.

A more permanent option is Gapseal, which is a sponge-like seal that can be cut to the size you require and then put into the gaps between your sash window frame. It can be used alone or in conjunction with adhesive strips at the top and bottom. This is a bit costly and must be reapplied throughout the course of your windows' life, but it can provide an option for the long term and is easy to take off in the event that you want to open the window.

Another popular DIY draught proofing solution is to use cling film that is scrunched up and placed into the gaps around your window. This is a great draught-stopper, but it can also hinder the movement of the sash and possibly cause fire. The sash has to be removed to open the window and the clingfilm will need to be reapplied each time the sash is closed.

As part of a general renovation you can have your window draught-proofed professionally. This may include the fitting of new sash strings, parting beads and staff beads in addition to the lubrication and rebalancing the weights and the fluidization and rebalancing of the pulley wheel. It may also include staining or painting of the frames and sashes. This will restore the sash to its original function and improve its energy efficiency, and repair any minor flaws in the wood. It is less disruptive than removing windows and can help reduce drafts, enhance thermal performance and significantly reduce costs.

Decay

If your windows are sash and have suffered damage or decay the good news is that they aren't necessarily unfixable. The timber used to construct the frames of these windows is usually of a very high quality and with proper restoration they can be restored to offer a high level of performance for many years. The key is regularly checking the frames and ensuring that the timber is properly ventilated to avoid moisture build up which can cause wood to rot.

The majority of issues with sash windows are easily evident, but some are more difficult to detect. In particular, wood decay is a difficult issue to treat because fungus eats away at the wood. While it is possible to repair rotten timber however the best method to prevent further decay is to keep the wood dry.

First, clean any paint from the hardware. It could be necessary to remove the bottom rail from the frame, and also the rail that joins it (this will depend on the position of the sash). You will then need to take off the "pocket covers" that are pieces of wood that are located on the sides of the frame low down that provide access to the weights (the parting beads run through the middle of them). You may need to use a sharp knife for removing them if they're painted or nailed into place. Once the pockets are removed, you can begin chiseling out any wood rot and apply an extremely high-quality, water-resistant filler. Once the filler has dried the primer must be applied to protect against further decay.

It is recommended to inspect the sash's weights inside the window too to make sure they are balanced and not misaligned or pulling one side more than the other. The sash may slide off the track if they aren't balanced. This could cause the frame to fall or even be damaged. The sash weights can be replaced with new ones or a new mechanism for balancing can be fitted, which will stop the sashes from bouncing to the opposite side of the window frame.

Poor Security

As time passes sash windows become exposed to the elements and prone to deterioration due to weather and general wear. Over time, this can lead to timber decay which in turn will need to be replaced - a costly repair that needs to be dealt with as soon as is possible. Wood decay can be spotted by water marks under the window or by the frame becoming soft to the touch. A professional consultation will be needed to assess the situation and recommend any required repairs to the sash window.

In time the rails on the bottom may also be damaged. The sill may show water marks or sash Window Repair a window that is soft to the touch may indicate this. A professional consultation may be required to evaluate the situation and recommend any necessary replacement or resealing of window sash components.

Triple and double glazed Sash windows do an incredible job at keeping noise from entering your home, so it can be a cause for worry when they begin to let it back in. If this is happening the structural integrity of sash windows may be at risk, and they will likely need to be replaced with a different option.

A common window repair issue for sash windows is that the sash becomes stuck in the frame. This could be caused by the sash cord being snapped, or it could be an indication of an issue with the sash or ratchets. If the issue is related to the sash the ratchets, some gentle pressure is usually enough.

This problem can be resolved by taking off the sash and cleaning the tracks. Once the tracks are clean remove any security fittings that may be present and then carefully removing the sash cords and chains will allow the sash be removed. A draught seal may be placed around the staff bead to decrease draughts and enhance the appearance of the paint finish. Decorators caulk can be used to fill the gap between the sash's box and the sash. This will improve the efficiency of the sash and reduce the risk of draughts.