• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Allowing your cat to come and go out of the home at their own pace is a great idea to keep it physically and mentally engaged. A flap can aid in reducing toileting incidents by making it easier for your cat to leave the house when necessary.

Take a look at the Door

A cat flap lets your pet to move around whenever they want without opening the door for them. This is a great way to keep your pet in the home when you are away or at home. It also helps keep unwanted pests from entering.

It is essential to examine the door's measurements to ensure you get the right size cat flap. There are a variety of sizes available. This will ensure that you purchase the right size to fit into your door made of upvc otherwise, it could be too small or large for your cat flap install and he will struggle to use it.

Before you take any action, though, take a ruler and measure the length of the door in various places along its edge. Also, take measurements of the door's height in a few spots. This is because a door that is too high could cause your cat to perform the gymnast's routine each time they need to use the flap!

If you're unsure of how to measure the door, it may be a good idea to seek assistance from a glazier or someone who performs this kind of work frequently. They will be able to help you determine whether or not your door is suitable for a cat flap, and provide you with the appropriate size of flap to purchase.

Mark out the shape of your hole on the door once you have the measurements. This will assist you when cutting the hole and save you money!

Make sure to put the hole in the correct place. For instance, if you're installing the cat flap inside Fitting A Cat Flap In A Upvc Door patio door, you must ensure that the hole doesn't sit too close to any hinges, as this can cause leakage and issues with the seal.

It is best to leave the task of installing the cat flap on glass doors to an experienced glazier. It may be difficult to install a cat-flap in an existing pane. You may also find that it breaks and loses its weatherproof seal.

Measure the Cat

A cat flap permits your pet to come and go whenever they want without needing to leave them to themselves. It can also prevent draughts entering your home, which isn't good for your cat or you.

If you do have a uPVC or composite door it may be difficult to install the cat flap. These kinds of doors are usually constructed with different materials than traditional wooden or uPVC doors, and the installation process is different, too. Make sure you check with the manufacturer if the door is compatible before you install the cat flap on your uPVC composite or uPVC door. Changes to the door could be detrimental to warranties.

Generally speaking, these kinds of doors are built to be tough and durable, with insulation built in. This makes them more resistant to the elements of weather than other types of doors, but they can be difficult to fit a cat flap double glazing flap into. If you're not sure if your uPVC or composite door will accommodate a cat flap, check with a professional joiner before starting.

You'll need to take the height of your child to make sure they pass through the door. This is easier if they are asleep or calm so that they aren't moving around too often. Once you've established their height, measure the distance between their stomach and the floor to determine where the bottom of the cat flap needs to go. You can then mark this position on the door.

If your uPVC or composite door is made of metal (either aluminium or steel), you'll need to be very careful when cutting it using power tools. Cutting into metal can cause cracks, especially if the area is made of toughened glass. This is why it's recommended to engage a glazier when installing your cat flap inside the glass pane. This will prevent the glass from breaking or becoming brittle. A glazier will also provide you with fitting a cat flap circular hole to use for the flap for your cat. This is less likely to crack and is safer for your kitty to use.

Cut the Hole

A good quality cat flap should come with a template drawing that you can use to mark the location on your door where the hole should go. If it isn't, you can make one yourself using the thin paper (tracing paper is the best choice). After the shape is pencilled in on the door you can then use a spirit level to make sure that the design is horizontal. This will ensure that the cat flap is properly positioned in the opening, and it will not open or close.

Next, make use of a jigsaw to cut out the pattern that is marked on the door. Make sure you are using a blade suitable for use on uPVC doors. Usually, it will be labelled accordingly, if not ask the staff at your DIY store for advice. Once you have the hole made then place the flap against it and then push it open to make sure that the flap's action is smooth. If it becomes stuck at any point, use a filer or a rasp to fix this.

Make sure there aren't any gas or electric pipes inside the door you're planning to cut into. The jigsaw may damage them. You should also be aware of any handles, or other fittings on the door that must be removed to accommodate the cat flap. Be cautious not to damage these items while cutting.

The majority of people who install a cat flap on their own will have the standard solid uPVC door and so won't have to deal with any of these issues. If your door is constructed of wood or has a decorative element that isn't easily removed, it will make the task.

It is always advisable to seek assistance from an expert cat flap fitter for these kind of jobs as it is important to get them done right to avoid potential problems in the future. If you do it wrong, it could result in the door becoming damaged and may cause the warranty to be invalidated.

Install the Flap

Once you have cut your hole, place the flap to check if it opens and is able to fit. If you spot any areas that stick or catch to the door, smooth them out using the aid of a hand file or sandpaper until it fits properly and opens without any problems. Be sure that the flap is flush with the door.

If your kit doesn't have templates, you can use tracing paper that is thin, such as a piece of paper or Acetate. Lay the paper against the door and draw the area where you'll will need to place the flap (this will serve as your cutting guide). Then using the pencil lines you've drawn on the door, mark out four screw holes in each corner of the flap - these will be the screws that you'll use to secure it in the right position.

The majority of upvc door panels with cat flap doors are strong and easy to cut. But, if your door is made of GRP or a composite, it can be more challenging. If you're not familiar with this, it is recommended to consult a professional. They can also tell you if your door is suitable to install a cat flap.

You can install the cat flap onto composite doors. However, it's essential to consult with the manufacturer or a professional joiner prior to making any changes because any changes to these doors may invalidate the warranty. If you decide to do the work yourself, bear in mind that it can be a messy job and could be dangerous.

You'll require an instrument like a grinder or a saw to cut through composite doors rather than only the GRP. Be aware that this could be extremely dangerous work and you'll need to take extreme care not to damage the door or yourself as it's extremely fragile. It's also important to note that cutting holes into any type of glass for a door is far more difficult than making the same change in a uPVC or solid wooden door.