• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Unstick a Suzuki Ignis Key

suzuki vitara key programming's quirky, affordable city vehicle gets a midlife refresh. It's not a hot hatch, but it can handle roads in rural and urban areas with ease. And its tight turning circle makes driving around towns a breeze.

The new model is also equipped with intelligent driver assistance and safety technology - including lane depart warning as well as a sleepiness alarm, which are both welcome additions to long drives.

Steering Lock

The steering lock is a crucial security feature that will stop your Ignis being stolen while it's in drive. It's a useful safety feature but it can be a hassle when you're in a hurry and you're unable to unlock your steering wheel. There are a few easy ways to fix the issue.

The first step is to determine if the ignition switch is in the "on" position. If this is the case, then try turning the key in the same direction as you did prior to the time that the wheel became locked. It's tricky, but usually it is enough to unlock the wheels.

If the wheel does not unlock You can spray a tiny amount of canned air into the ignition cylinder to help lubricate it. Make sure you put on eye protection before doing this so that you don't get any canned air in your eyes! You can also use liquid graphite to lubricate your piston.

If none of these options work, then you'll need to replace the ignition lock assembly. Luckily, this is an easy part to locate at any auto parts store. Be sure to buy the exact replacement, and then compare it to your original before you attempt to install it. Take off the cover from the ignition to see the ignition assembly.

Worn

The steering lock may bind the ignition switch and cause the key to get stuck. This safety feature is designed to keep your Ignis from moving when the engine is running. If this happens, turning the steering wheel will release it.

Over time, your Ignis key can start to wear out and become more difficult to turn. This might not be as common as a bad ignition switch, but it is a possibility that it will happen. If this is the situation it is recommended to replace your ignition switch.

Find out if anything can block your Ignis ignition key from entering the cylinder. Sometimes there can be debris or dirt that can be wedged inside and keep the key from turning exactly as it is supposed to.

In the end, you can try a little grease to see if it helps. There are a myriad of types of lubricant available to buy, so browse your garage or an auto parts shop in your area to find one that will work.

Another alternative is to choose a silicon "glow in the dark" key cover. These covers absorb light and release it when the weather is murky or darker. They also to protect your fob or key from wear and tear. They are available for a variety of Suzuki models and can be purchased either online or at the suzuki key fob replacement cost dealership near you.

Bent

Keys can be bent over time. The teeth of the keys may not engage with lock cylinders the same way. This can hinder the key from turning. If this happens the key needs to be replaced. If you have a spare, it is an ideal idea to get it duplicated and store it in a safe spot.

Another possible cause is the cylinder for ignition itself could wear out. If the lock pins inside become stuck or stuck it can stop the key from going all the way into or out of the cylinder. The replacement of the cylinder may solve this issue, but it's best to do this before your key is stuck in the ignition, to avoid further damage.

If your key from Ignis is stuck even after trying the simpler fixes it could be time to try lubricating the cylinder. Graphite powder or liquid graphite could assist in allowing the lock pins to move more freely and free your key. This can be found in most auto parts stores. Be sure to put your Ignis into park before applying the grease. Do not attempt manipulating the Ignis with your hands to unbind it. This could lead you to more serious problems.

Broken

If you've tried all the easy methods to make a key unstick but it doesn't move, the last resort is to use some lubricant to make it move. You can purchase the lubricant from your local auto parts shop and apply it with a cotton swab or an abrasive to the inside of the lock cylinder. Try again. Move the key forwards and backwards gently to spread out the lubricant. Try to massage it forward but be careful not to push too hard because you could cause damage to the cylinder.

It is also possible that the circuitry inside the key may become inactive over time. This isn't nearly as common and usually means you'll need to get the key duplicated for the new one.

The case of your suzuki sx4 key keyfob may also be damaged or worn. This is most likely especially if you're using a cheap replica key fob, which has a plastic or rubber shell. The Key Crew may be able to migrate the internal circuitry from the old keyfob to a replacement case depending on the circumstances. This will save you the expense of purchasing a new keyfob. When we call to set up your service, we'll inform you if this is a feasible alternative.