• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

When It's Time to Repair Windows

It's important to be careful when repairing your windows. Wear safety goggles and gloves to shield yourself from glass shattering.

An easy solution to a damaged window is to place a plastic covering over the crack. This will keep insects, snow and rain from getting into the home.

Cracked Glass

Cracked window glass not only makes your home appear less appealing, but it can also let drafts and other elements to enter the home. The cracks could be caused by an impact (like the impact of a soccer or baseball ball) or are the result of stress, such as an abrupt temperature change or a sudden temperature change, it's crucial to get them repaired as soon as possible to prevent further damage and ensure your windows are operating effectively.

Use clear tape to cover your damaged window if it is not damaged. This is a quick, low-cost solution to shield your window from dust, water bugs and other sand. It also shields your windows from the elements.

If the crack is severe or is getting worse, you should consult an expert. A professional glazier will determine the cause of the crack and recommend the best repair method.

Impact cracks are the most frequent type of window break typically resulting from a hard object hitting your window with enough force to fracture it. These cracks are typically with a starburst-like pattern of lines and shattered pieces that can be dangerous if they fall loose. If you have double-pane windows, this crack could compromise the gas layer between the panes and impact the efficiency of your window's energy use.

Another type of crack is a stress fracture, which develops gradually as time passes, because of extreme temperature changes or other environmental factors. These cracks begin around the edges of your window and can eventually expand into full-blown break.

A more serious but doable crack is one that is a pressure crack. It is a curvy straight line that can stretch across the window on one or more sides. It could be caused by high or low pressure which can cause the glass to expand or contract.

If you're ready to take further than nail polish and tape there are several alternatives to fix cracks in your window glass. Glass Repair Film, while more expensive can provide your windows with more protection and durability. If you'd prefer to make it yourself, epoxy is an adhesive that can be used to repair cracks and prevent further damage. It can make your window appear as if it never had any cracks in it at any point.

Leaking Windows

If you notice an area of dampness under your window, or you notice that the wood around it is brittle or rotting, it could be time to consider a window repair project. In excess moisture, it creates the perfect environment for mold and mildew, which can lead to a myriad of issues for your home. They can lead to indoor air pollution, sagging drywall, and can even worsen allergies. If left unchecked they could cause structural damage to the home.

It's best to call an expert if water is visible or coming from the outside. Leaking windows are one of the most common causes of mold and structural damage So don't leave them untreated.

In many instances, caulking can be used to stop leaks. Before applying the caulking, you'll need clean the area and remove any existing caulking.

Check the weepholes on the frame for any debris. They are designed to drain excess rainwater, but they could be clogged by insect corpses and other debris over time.

Check the seal between the double-paned window and the frame. This will ensure a barrier between the glass panes, and replacement will make the windows more efficient. As time passes, the seal can get worn out and let water into your home.

Another indication of leaks is the presence of water stains on ceiling and walls. The drywall will turn discolored once it is soaked with water. Peeling paint is another sign of water altering the adhesive properties of the paint and pulling it away from the wall.

Faux Muntins & Mullions

In the past muntins (or glazing bars, as they are known in the UK) separated and held the panes of traditional multi-paned windows. After WWII larger expanses of glass with tempered were made available. They're mainly used as decorative elements in some older homes.

The effects of rain or wind can harm a single support or a small group, leaving a crack in the window. The good thing is that you are able to repair the majority of these decaying or brittle components.

First take a rag and clean the affected areas. Make use of ammonia-based cleaning products that doesn't leave any residue. Then, take off any rotting or loose components and use an exacta-knife to trim the intersections between the vertical and horizontal painted window muntins. After trimming the intersections using painter's masking tape, you can use the tape to seal off the lower section of the window frame. Apply a thick layer of white paint to the areas that you lightly painted in the first pass. Let the paint dry completely before removing the tape and applying a new coat.

If you're experiencing an issue that is more serious, such as cracks that form an hourglass shape in the center of the window, then it's probably better to replace the sash. In such cases you'll need to search for a replacement that matches the existing window in both style and size.

To save money you can install an attached grid window. These windows are made of a glass pane, with a set of muntins that are fixed to the surface. This creates a divi-sected appearance. They're not as efficient as traditional windows, however.

Installing a drip cap can stop water from getting into the window frame. Most home centers sell these drip caps made of aluminum for about $20. They're much simpler to install than windowsash replacements, and they'll provide you with the same functionality as a real mullion or muntin.

Broken Sashes & Frames

A damaged window sash must be a sign that you should call for help. A damaged sash, ignored, could lead to water leaks, wood rot, and other serious issues to the frame and sill. If you have a damaged sash, you should replace it immediately to ensure that the window is sealed.

The issue is usually caused by worn-out or improperly installed cords. Fortunately, replacing them is relatively simple and is possible in the majority of double glazing repairs-hung windows. First, you'll need to take off tabs made of metal that hold the sash. Press upwards on the opposite side of the sash (it isn't important which side) and then pull it towards the opposite side to pull it out. You'll need to remove the strip that separates the sash from the other so you can access the location where the sash cords are located.

Once you've removed the sash, make sure you look at its metal tabs and compare them to the tabs on the new sash. If they're different, it will be hard to put the new one in its slot and affect how the sash operates. This can be easily corrected by placing the tabs at the correct positions on your new window.

In addition to the sashes, you'll also have to examine the frame of your window for damage or decay. This is a good thing to do on a regular basis, as wood will shrink and wear down as time passes. It is important to repair any visible damage as soon as you can, to avoid a more serious issue.

If your window frames are in poor condition you'll need to treat them using a homemade preserver made using half mineral spirits and half boiled Linseed oil. After the treatment has dried for a total of two days, you can finish your frames with a high quality latex paint. A fresh coat of paint can also protect your window from the elements.