• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Replace Door window handles (Botdb.Win)

Door handles are a crucial part of the decor of your home. A new handle will bring your home's decor modern.

As time passes, your knobs for your doors can begin to feel stiff, or break. These are signs it's time to change the knobs. This guide will help you choose the best door handle upvc replacement window handles for your home.

Door Knobs

The handles on your doors will enhance the look of your home and make it easier for you to open and shut them. They come in a variety of colors, finishes and styles that will complement your decor. If yours are starting to begin to show signs of wear or just need an upgrade, replacing them is relatively easy and can be accomplished in a few steps.

You need to locate the spindle, or shaft, through which the knob is inserted to the door. Some knobs have a tiny opening that you can use a screwdriver for removal of the set screws that keep the handle in place. Some have a thin slot or hole that you can press a spring-activated detent pin with a flathead. This pin releases the latch mechanism, and lets you to pull or push the knob.

After you have gained access to the shaft or spindle, take the knob off of the door and replace it with the new one. Make sure it is aligned correctly and ensure whether the latch works before tightening the set screws.

After replacing the knob, place the rod that is attached to the latch over the door's hole. Interlock it with the rod system on the second knob. Ensure that the holes are in alignment, then tighten the screws on the latch plate.

Some homeowners opt for a brushed or smooth metal finish for the door hardware to give their home a modern and sleek appearance. This can be matched with the furniture they have. Some prefer a rustic look that goes well with farmhouse-styled rooms. If you have a member of your family with mobility issues, you may prefer the lever or rim lock that requires less pressure to operate.

While aesthetics are traditionally the primary consideration for door handle design, other factors are becoming more important too. Infection control and accessibility have been major considerations in the creation of new handle designs. For example, some can be operated using an arm.

Latch

The latch that holds the door handle open will wear down as time passes. It is easy to change the latch on your door handle. This will result in huge differences in how it opens and closes.

Depending on the type of handle you have, the latch may be a part of the knob itself, or it could be an independent piece that is attached to the door itself. In either case, the same process to remove and install will be used. It's easy to remove the old latch, especially in the case of an entry handle that has a "magic" button. This little pressure-slot, located on the side knob, is what you have to press to remove the latch of the handle.

If your handle does not come with this button, you will need to remove the cover plates that are placed over the latch plate. These are usually rectangular or circular and can be removed using a screwdriver in order to remove them off the handle. Some have a tiny slot in them that you can insert your screwdriver into, while others snap off.

Then, loosen the machine screws that secure the plate's inner and latch to the door handle. It is important to keep these screws with a pointed tip in a secure location so that you can reuse them in the future. After these screws are removed you can remove the latch plate and mechanism out of the door's hole and place it in a safe place.

Now you can begin installing the new latch. Install the latch plate into the door hole and secure it with the hardware provided. Make sure the square pin on the interior of the latch is facing the latching mechanism inside the handle and that it lines up with the other screw chambers in the door handle. Then push the exterior latch plate onto the handle and secure it with the screws provided.

Strike Plate

It is not uncommon to replace a door handle if it feels loose, or does not euro lock handles properly. This is usually due to malfunctioning components of the latching mechanism, like an unbalanced strike plate that is too small or shifted upwards or downwards on the doorjamb over time. This project allows you to replace your old strikeplate with a longer one, which will provide greater security for your door and will keep it shut.

To check if the problem is caused by the strike plate, apply lipstick or similar marking material on the bolt that is used to latch. Close the external door handles and attempt to latch it. If the mark is located below the strike plate hole, this indicates that your door won't latch because the plate is too short. If the mark is higher or below the strikeplate hole, the strikeplate may have been moved upwards or downwards on the doorjamb.

It is possible to put the new strikeplate in the old one using the screws included with it, depending on your door. But, you may have to drill holes first, and then chisel some of the wood to make sure it's a snug fit. If this is the case, you must be careful not to cut too hard or you'll ruin the strength of your doorjamb.

Installing a brand new box-style strike plate will give the lock a more secure grip on the doors and require more force to open the doors. It usually requires two longer screws to secure the strike plate to the door frame. To do this, you'll need to take off the existing strike plate, then drill and chisel away the wood to create space for the new one.

This difficult-to-find strike plate was made to work with antique rim locks, and it's made from robust solid brass with a heavy duty thickness. It comes with machine screws and wood screws, ensuring that you have the correct hardware for the job. Keep in mind that wood screws have a pointed point, while machine screws are more blunt.