• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Cat flaps allow your pet move around whenever they want without needing to let him in or out. They also can help to keep your cat from having to go to the bathroom in the house.

It is simpler to install an animal flap on a upvc panel than on a glass one but you'll require some expertise and appropriate tools.

Measure the Door

The installation of a cat flap in a front door could be difficult however, as long as the cat flaps for french doors flap is of the correct one and you follow the guidelines it shouldn't be too difficult. We will show you how to draw the shape, using the jigsaw to slice the door's opening and then complete the job by securing the cat flap to the door. This will ensure the flap stays in position and shields the doors from the damage caused by rain and wind.

To determine the size of the cat flap you need, measure the width of your pet. This will ensure that the flap is big enough that your pet can enter and leave the house without having to open or close the door each time, yet small enough to prevent them from moving too far either way.

If your kit has an illustration of where to drill, you can place it on the door, and then use a pencil around it. If your door has a sill or moulding at the bottom, make sure you leave plenty of space between your cat and these elements.

Then put on your eye protection as well as a dust mask and using a jigsaw start to cut along the line that you've drawn in, don't try to push the blade too hard because this will cause it to cut more quickly than you'd like it to. Set the square with a ruler to ensure that you are cutting the material properly and that the hole is a rectangle shape. Once you are satisfied with the result, you are able to take out the rest of the door material.

Draw a Line

The cat flap is a great way to allow your pet to go out and in without having to worry about them being in the house with guests or leaving unwelcome gifts in the house. It also reduces drafts and helps keep the temperature inside your home in a stable manner. However, fitting a cat flap in your door could be an overwhelming task for those who've never done it before, leading many people to seek out a professional carpenter or joiner to complete the task. While this is definitely an option, it's possible to do the job yourself if you have the proper tools and follow instructions carefully.

This is much easier to accomplish on doors made of wood, however it is still possible using uPVC. However it is important to be cautious not to harm the doors since this could make it impossible to claim your warranty. The first step is to measure the door, ensuring that it is able to fit the new cat flap. If you have an ordinary uPVC panel it should be a breeze. However when your door is composite or a different type of door, you might require more care.

Next, you will need to determine the height of your belly for your cat. This is the height between the floor and the underside of your cat's stomach. You will need to locate a space at the entrance that allows your cat to move through easily. Once you have this information you'll need to mark out the area with a pencil and a spirit level to be sure that the hole you make will be a good fit for your cat.

Once you have marked out the area, it is time to cut the hole. You will require an jigsaw. It is essential to take your time to ensure that the cuts are smooth and straight instead of uneven and rough, as it could cause damage to your door. Be sure to wear safety glasses and a dust protection mask whenever working with the jigsaw as inhaling the sawdust could be hazardous to your health. After you've completed the cutting process, you will have to smooth out the edges of the hole with sandpaper so that your cat flap can be fitted easily.

Cut a hole

It isn't easy to put an animal flap on a door panel or sealed double glazing unit. If you are not very proficient in DIY, it is recommended to hire a professional to do the job for you. A shoddy job might not just be ugly, but also a security risk and also allow cold air to enter when the cat is outside and hot air to escape once inside.

The hole's location should be marked on the door using an eraser and a spirit level. This will ensure it is positioned correctly and is flush with the rest of the door. Make sure to have sandpaper to smooth out any rough edges.

Once the line has been drawn, you can cut the hole with the jigsaw. Remember to wear the appropriate safety gear for working with a power tool. If you are concerned about the sound of the jigsaw, you can purchase a cordless version which is quieter and more user-friendly to use.

It is best to only remove the material needed to make the cat flap. A little bit of extra material will be required for the thickness of the the cat flap itself but removing more than that can cause problems or damage the doors frame.

A door made of upvc may contain a metal frame or panel that could interfere with the microchip cat flap and in this case you'll need to make an over-sized hole to ensure that the metal doesn't get in contact with the the cat flap. If this is done, it is essential to fill in the gap and render it watertight.

If you're installing the cat flap onto a upvc door or double-glazed window with a metal frame, you'll need to talk to a professional who can provide you with a brand new pane of glass with the hole for the cat flap already drilled in it. It is cheaper to do this instead of trying to install a cat flap into an existing pane of glass that has not been manufactured specifically for the purpose.

Place the Flap

Cat flaps allow your pet to move around whenever they want, allowing them the freedom to lounge inside the house when they want to. However, if you own an uPVC door it can be difficult to put in a cat flap, especially in the absence of a glass pane that can be cut to fit one. If you are willing to install a half-glazed upvc door panel with cat flap replacement upvc door panel with cat flap panel, it's possible to add a cat flap. It's not as simple as just cutting a hole through the door though and there are some things you'll need first to make sure it's safe.

A composite, uPVC or GRP door panel is usually composed of a thin plastic skin that is bonded to an insulating polystyrene base. It is crucial to be careful when cutting the material. This type door has a template you can use to make the hole.

Once you've determined the position of the hole in your door, it's time to put in the cat flap. You can buy and fit many different models including basic button operated ones to microchip-activated ones that allow access only to your pet. Whatever kind of cat flaps you select it's essential that your cat can utilize the flap with ease without getting stuck in bad weather.

It's a good idea to select a circular Fitting cat flap in upvc door panel rather than a square one, as circles can be more securely cut into the door glass. This is because square holes are more likely to crack the glass when they're drilled. It's also a safer choice to use since you're not putting yourself at risk by having to drill into toughened glass that might break and cause injury to your pet or family members. This is especially important if you have child or an elderly person living at home who could be injured by shards glass.