• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is an excellent choice for modern homes. They are long-lasting, durable and easy to maintain. In contrast to aluminium and timber, they are not susceptible to corrosion or rot.

It is important to clean and oil UPVC doors and windows on a regular basis. This will prevent unnecessary repair costs and increase energy efficiency.

1. Broken Glass

The broken glass in your windows can cause severe damage to your home and even be fatal. It is essential to take the time to ensure that you're doing everything you can to ensure that your windows are in good condition.

For single pane windows it is relatively easy to replace them, and the replacement will usually fit inside the old frame very easily. However when you have double-pane windows that are secured by internal beading it will be more difficult to remove the panes that are in place and replace them with new ones. In this instance you'll need source some plastic spacers that assist the new pane to fit perfectly into the window frame.

If you plan to attempt to remove the window panes by yourself it is crucial to wear the proper safety gear that includes gloves with a thick layer of material and eye protection. It is also a good idea to lay down a drop cloth prior to when you start working on the glass so that any fragments of glass fall onto the fabric instead of onto the floor where they can be trampled on and cause further damage.

It's a good idea to tape the gap once the glass has been removed. This will stop water and drafts from entering your home until a professional arrives to fix the window. It also acts as an obstacle to stop criminals from getting into your home. If the distance between the door and the window is large, you might need to consider a security screen that also has an opening. This will provide the best of both.

2. Sagging

uPVC is a durable energy-efficient, cost-effective and economical alternative to timber sash windows. Over time, they can develop a number of problems such as sagging. A sagging uPVC windows can cause issues with light, draughts and even security. It's crucial to act immediately if you realize that your uPVC windows are sliding.

To repair a window that is sagging, you can try repositioning the hinges. First, you'll need to open the windows to reach the frame. Then, using the screwdriver, you'll be able to take off the hinges on the top and bottom and adjust them by turning them clockwise or anti-clockwise. Once you've adjusted the hinges, close your window and verify the fitting. If you're satisfied with the fit of the window, you can tighten screws to secure them in place.

If you are unable to move the hinges, you might need to replace the seal. Rubber seals can dry out and lose their elasticity with time, which causes them to loose their elasticity. If this happens, it's important to replace the seal as fast as possible to ensure your uPVC windows remain watertight and safe from drafts.

UPVC handles can also loosen up. This is typically caused by screws that have been removed over time, but it could be due to the handle mechanism wearing out. It's fairly simple to fix a loose uPVC handle. First, you'll need close the window and then perform an experiment to ensure that it fits. The corners of the sash should be aligned with the casing joint. If it doesn't, you can use a screwdriver to loosen the handle, and then return the mechanism to its original the position it was in.

3. Water Leaks

It is crucial to act if you wake up every morning to find mouldy walls and wet floors. Water leaks through windows can cause structural damage to your home, and affect your ability to regulate the temperature of your home. The most common cause for leaks in uPVC windows is that the sealant surrounding the frame is either damaged or not present.

This is a relatively easy fix and should be undertaken by any competent DIYer. Depending on how severe the issue is, old caulking might need to be removed. When it is time to uPVC repair, you must avoid 'over-caulking'. This can make your window more difficult to clean and decrease its energy efficiency.

It is important to check that any drainage holes are free of debris and that the sill pan is angled properly so that it drains away from the window. In more severe situations, you may have to replace the window.

Other indicators of long-term water leakage are sills that are rotten and the appearance of black spots of mold on the wall near the window. The mold thrives in damp environments and is able to quickly spread throughout the home.

If the leakage is occurring between the double-glazed window, it is more likely that the issue is with the seal rather than the frame. It is also possible to be corrected by an uPVC window specialist who will replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or timber loose and blow open with a breeze it could be hinges at fault. Anyone who is a skilled DIYer can fix these in a matter of minutes.

Nearly every home in the UK will have top-hung or side hung uPVC windows that are hinged and, just like any mechanical component they can wear down over time. Changing a window hinge is essentially a simple procedure, but it is easier when you have a person to help you hold the frame up.

It is also worth checking that the uPVC hinges are being opened and closed in the correct direction. Look for the arrows that are on each hinge to determine which way the window should be opened.

The issue could be caused by opening the window improperly or by a poor installation at the factory. It is usually possible to fix the issue by sending us a photograph via our website and we will be pleased to offer you suggestions.

It is also important to grease the hinges regularly. Applying a light engineering lubricant to the hinges is a great way to do this. We recommend using an oil that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It can also prevent corrosion and decrease the chance of sticking. This is recommended to be done at least once a year. WD40 and other solvent based oils are not recommended because they could damage parts of your upvc window repairs near me window.

5. Draughts

Draughts in Upvc windows can be caused by a variety of different factors. The hinges can also be disaligned as a result of wear, which can cause an opening where the sash and frame meet. They can be repaired by giving them good clean, but when they're beyond repair, it may be necessary to have them realigned or replaced. In addition, the interlock could be unbalanced. This is located on the hinge's side and may need to be cleaned. In some cases it might be necessary to replace the hinges.

The second most frequent reason for draughts is window seals, these are prone to wear or damaged over time and will allow air to escape through the gaps. Replacement of these with high-quality weatherstripping can help stop draughts. Replace the windows made of upvc window repairs near me with low-emissivity lenses. This will help to regulate indoor temperatures, and reduce draughts.

The last way to reduce drafts effectively is to use a Draught-exclusion device. These are typically fabric tubes filled with a filler which can be hung over your window sill. They will keep your home warm by blocking out cold air.

The windows made of upvc can remain a great source of insulation and security to your home with a little regular maintenance and repairs. It is essential to remember that all windows will eventually become worn out, and it could be more cost-effective to replace them rather than repair them. If you are experiencing issues with your window made of upvc, it's best to consult a professional as soon as you can.