• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a great choice for modern homes. They are easy to maintain and durable, as well as long-lasting. Unlike timber and aluminium, they are not susceptible to rust or rot.

It is essential to clean and oil UPVC doors and windows regularly. This will reduce unnecessary repair costs and also increase energy efficiency.

1. Broken Glass

The broken glass in your windows could cause significant damage to your home and may even be fatal. It is crucial to take the time to make sure that you're doing everything you can to keep your windows in good condition.

Single-pane windows are fairly simple to replace, and they generally fit into frames of the past easily. If windows with double glazed window repairs near me panes are held together by internal beading, it will be more difficult to remove and replace the old panes. In this instance, it is necessary to purchase plastic spacers in order to aid in fitting the new pane into the window frame.

If you are going to try to remove the window panes yourself it is crucial to wear the proper safety gear that includes gloves with a thick layer of material and eye protection. It is also recommended to lay down a drop cloth before you begin working on the window panes, so that any shards fall on the fabric and not on the floor which could cause them to be trampled.

It's a great idea to cover the gap with tape after the glass is removed. This will keep drafts and water from getting into your property until a professional comes out to fix the window. It also acts as a barrier, deterring any intruders to gain access to your home. If the distance between the window and the door is significant, you may prefer an alarm system that includes a window. This will provide the best of both.

2. Sagging

uPVC is a durable, energy-efficient and affordable alternative to timber sash windows. In time, they could develop a variety of issues such as sliding. A window that isn't properly aligned can cause problems with light, draughts and even security. If you find that your uPVC window is beginning to sag it's important to act quickly to stop the issue from worsening.

To fix a sagging window you can try repositioning the hinges. First, you'll need to unblock the windows so you can access the frame. After that, using the screwdriver, you'll be able to remove the hinges at the top and bottom and adjust them by turning them clockwise or counter-clockwise. After you've repositioned the hinges, shut your window and check for an appropriate fit. If you're satisfied with the fit, you can tighten the screws until they stay in position.

If you are unable to reposition the hinges, you might need to replace the seal. Over time, rubber seals lose their elasticity and become dry and cause them to lose tightness. If this happens, it's essential to replace the seal as fast as possible to ensure your uPVC windows are watertight and draught-proof.

UPVC handles can also become loose. This is typically caused by screws that have become undone over time, but it could be due to the mechanism of the handle wearing out. Luckily, it's not difficult to fix a loose uPVC window handle yourself. First, you'll need to close the window and do an initial fitting. The joints at the corners of the sash should be aligned with the joint on the casing. If it does not then you can use the screwdriver to loosen the handle. Then, turn the mechanism to position.

3. Water Leaks

It is essential to act if you get up each morning to find a smoky wall and floors that are wet. Leaks of water from windows can cause structural damage to your home and impact your ability to regulate the temperature inside your home. The most common reason for leaking uPVC windows is that the sealant surrounding the frame is damaged or is missing.

This is a simple fix that can be completed by anyone who is a DIYer with the skills. Depending on the severity of the problem is, the old caulking might need to be removed. It is important to remember that when it is about uPVC window repairs you should not be tempted to 'over-caulk in order to make the area harder to clean and could decrease the efficiency of your energy usage.

It is essential to ensure that any drainage holes are clear of debris and that the sill pan has been angled correctly so that it drains away from the window. In more serious situations, you might have to consider replacing the window.

Mold spots and rotten sills are also signs of water leakage. This fungus thrives under damp conditions and can spread quickly throughout the home.

It is also important to remember that if the leak is coming from between the glass of your double glazed window repairs near me-glazed windows it may be more likely to be a problem with the glass seal, rather than the frame or sliding. Again this can easily be fixed by an uPVC window specialist who will replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or loose and blow open with a breeze It could be hinges at the fault. They can be repaired by any skilled DIYer and are usually completed in a matter of minutes.

Like any mechanical part hinges will wear out over time. It's very simple to change the hinges on a window, but it's easier if someone helps hold the frame.

Verify that the uPVC hinges are open and closed in the correct direction. You can check this by looking for the arrows on each hinge, this indicates which way the window should open.

Faulty window hinges could be caused by improperly opening the window in a particular way or due to poor installation at the factory. It is usually possible to fix the issue by sending us a photograph through our website and we will be happy to give you suggestions.

It is also essential to ensure that the hinges are lubricated on a regular basis. Applying a light engineering lubricant on the hinges is an ideal way to do this. We recommend using the lubricant that doesn't contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can help the window to open and close more easily. It also helps prevent corrosion and reduce the risk of sticking. Ideally, you should do this once a year. WD40 and other solvent based fluids are not recommended since they will damage parts of your uPVC window.

5. Draughts

Draughts in upvc windows can be caused by a few various factors. Firstly the hinges, again due to wear and tear can become misaligned, this will cause a gap to form between the sash and the frame. If they're beyond repair, it could be required to realign them. In addition, the interlock could also become disaligned. It is located on the hinge side and could require to be cleaned. In some cases it might be necessary to replace the hinges.

These seals are susceptible to wear and tear or be damaged over time, allowing air escape. Replacement of these with high-quality weatherstripping will help to stop draughts. Another alternative is to replace the window with low-emissivity glass. which will help regulate indoor temperatures and will lessen the possibility of draughts.

The last way to reduce draughts effectively is by using a draught-excluder. These are typically fabric tubes filled with a filler which can be hung over your window sill. These will keep your home warm by blocking out cold air.

With a bit of regular maintenance and repairs, your upvc windows will continue to provide an excellent level of security and insulation for your home. However, it is important to recognize that all windows have a life span and eventually, they will reach the point when it's more cost-effective to replace them rather than repair them. If you encounter any issues with your upvc window, it's best to consult an expert as soon as you can.