• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is an excellent option for modern homes. They are easy to maintain and durable, as well as long-lasting. As opposed to aluminium and timber they are not susceptible to corrosion or rot.

It is essential to clean and oil UPVC doors and windows regularly. This will help avoid unnecessary repair costs as well as improve energy efficiency.

1. Broken Glass

The damaged glass in your windows could cause serious damage to your home and may even be fatal. It is essential to take the time to ensure that you're doing all you can to keep your windows in good shape.

For single pane windows it is fairly easy to replace them, and the replacement will usually fit inside the frame that was previously installed easily. However when windows with double panes are anchored by internal beading it will be more difficult to take out the panes that are in place and replace them with new ones. In this case it is essential to purchase plastic spacers in order to aid in fitting the new pane into the window frame.

If you're planning to attempt to remove the window panes by yourself, it is essential to wear appropriate safety gear, including thick gloves and eye protection. It is also recommended to lay down a drop cloth prior to when you begin working on the glass, so that any shards will fall on the fabric instead of onto the floor where they can be trodden under and cause further damage.

It's a good idea to seal the gap after the glass has been removed. This will keep drafts and water from entering your home until a professional comes out to fix the window. It also acts as an obstruction to prevent intruders from making their way into your home. If the distance between the door and the window is substantial, you may want to use a security screen that also has an opening. This will give you the best of both.

2. Sagging

Upvc windows and doors are a cost-effective energy-efficient, durable and long-lasting alternative to timber windows with sash. However, with time, they may be afflicted by a variety of issues like sagging. A sagging window can cause problems with light, draughts, and even security. If you find that your uPVC window is beginning to lose its shape, it is important to act swiftly to stop the issue from becoming worse.

To fix a window that is sagging you can try to reposition the hinges. First, you'll need to open the windows so you can reach the frame. Then, using an screwdriver, remove the hinges at the top and bottom and adjust them by turning them clockwise or counter-clockwise. Once you've repositioned the hinges, close the window and verify the an appropriate fit. If you're happy with the fit, you can tighten the screws to ensure they remain in place.

If you can't reposition the hinges you may need to replace the seal. Over time, rubber seals lose their elasticity and dry out, which causes their tightness to decrease. It is crucial to replace your seal as quickly as you can in order to keep your uPVC window waterproof and draughtproof.

uPVC handles may also loosen up. This is usually due to screws that have become undone over time, but it can also be due to the mechanism of the handle wearing out. It's relatively easy to fix a loose uPVC hand. First, you'll need to close the window and perform an initial fitting. The corners of the sash must align with the casing joint. If it isn't then you can make use of a screwdriver to loosen the handle and then reverse the mechanism back into position.

3. Water Leaks

It is important to take action if wake up every morning to discover mouldy walls and wet floors. Windows that leak water do can not only cause destruction of your home's structure but also hinder your efforts to control the temperature within your home. Most of the time, upvc window repairs window leaks are caused by a damaged or missing sealant.

This is an easy fix that can be completed by any DIYer who has the ability. Depending on how severe the issue is, old caulking may need to be removed. It is important to keep in mind that when it is about uPVC window repairs you should avoid the temptation to "over-caulk in order to make the area more difficult to clean and could reduce your energy efficiency.

Verify that the drainage holes have no debris in them, and also that the sill pan has been properly angled to allow the water to drain from the window. In more extreme instances, you may need to replace the window.

Moldy sills and rotten ones are other signs of water leakage. The fungus thrives in damp conditions and can quickly spread across the house.

If the leakage is occurring between the double-glazed window, it is more likely the issue is with the seal than the frame. It is also possible to be repaired by a uPVC window expert who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be the reason when your uPVC window is difficult to open, or if it blows open with an ease. They can be repaired by any DIYer who is skilled and can usually be completed in just a few minutes.

Like any mechanical part hinges are prone to be damaged over time. Changing a window hinge is an easy process but it can be simpler with someone else to help you hold the frame in place.

It is also worth checking that the uPVC hinges are opening and closed in the right direction. You can do this by checking for the arrows on each hinge. This shows which way the window should be opened.

Window hinges that aren't working properly could be the result of incorrectly opening the window in a certain manner or because of inadequate installation at the factory. This issue can be fixed by sending us a photograph through our website and we will be happy to give you advice.

Regular lubrication of the hinges is essential. This can be done by applying an oil that is light in nature to the hinges. We suggest using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It can also prevent corrosion and reduce the possibility of sticking. This must be done at a minimum every year. WD40 or other solvent-based oils should not be used since they can cause damage to your uPVC windows.

5. Draughts

Draughts can be caused by different factors. Firstly the hinges, again because of wear and tear, can become misaligned, this will cause an opening to appear where the sash meets the frame. They can be repaired by giving them good cleaning, but when they're beyond repair, it may be necessary to have them re-aligned or replaced. In addition, the interlock could be misaligned. This happens on the hinge's side, and could require to be cleaned. In some instances it is possible to replace the hinges.

The next common reason for draughts is window seals. These are susceptible to being worn out or damaged over time, and will allow air to escape through the gaps. Replacement of these with high-quality weatherstripping will help to stop draughts. Replace the windows made of Upvc with low-emissivity lenses. This will help control indoor temperatures and lessen the risk of draughts.

Another, and most effective ways to reduce draughts is by using an draught excluder. These are typically fabric tubes which are filled with a kind of filler. They can be positioned on top of your windowsill. They will help stop cold air from entering and keep your home warm and cozy!

With a little maintenance and repairs windows made of upvc will provide an excellent level of insulation and security for your home. However, it is important to realize that windows last for a certain period of time and eventually, they will reach a point where it is more efficient to replace them than fix them. If you are experiencing issues with your Upvc window, it's best to consult a professional as soon as you can.