• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is a great option for modern homes. They are easy to maintain and durable, as well as long-lasting. As opposed to aluminium and timber they do not corrosion or rot.

It is important to clean and oil UPVC windows and doors regularly. This will prevent unnecessary repair costs and improve energy efficiency.

1. Broken Glass

The damaged glass in your windows can cause serious damage to your home and may even be fatal. It is essential to ensure that your windows are in good working order.

For single pane windows, it can be relatively simple to replace them, and the replacement will usually fit inside the frame that was previously installed easily. However If windows with double panes are held in place by internal beading it will be more difficult to remove the old panes and put in new ones. In this situation it is essential to purchase plastic spacers in order to make sure that the new pane fits into the window frame.

If you're planning to try to remove the window panes by yourself, it is essential to wear the appropriate safety equipment that includes gloves with a thick layer of material and eye protection. You should also lay down a drop cloth before you begin working on the window panes so that any shards of glass fall onto the fabric, not onto the floor which could cause them to be trampled under.

Once the glass has been removed, it's a good idea to seal the gap with packaging tape or duct tape to stop drafts and water from entering the property until a professional comes out and repair the window. This will also act as a barrier, deterring any intruders to gain access into your home. If the gap is large, you may be interested in an alarm door that comes with an integrated window, as this will offer the best of both worlds.

2. Sagging

Upvc windows and doors are an affordable energy-efficient, durable and long-lasting alternative to timber sash windows. In time, they could be affected by a variety of issues, including sagging. A sagging window can cause problems with light, draughts and even security. It's crucial to act when you discover that your uPVC windows are falling down.

To fix a sagging window you can try repositioning the hinges. First, you'll need to open the windows so you can get at the frame. You can then unscrew both the hinges on the top and bottom using a screwdriver and adjust them counter-clockwise or clockwise. Close your window to test the fit after you've moved your hinges. If you are happy with the fit of the window, tighten the screws to secure them in the right position.

If you are unable to reposition the hinges you may require replacing the seal. Seals made of rubber can dry out and lose their elasticity with time, causing them to loose their elasticity. If this happens, it's essential to replace the seal as soon as you can to ensure that your uPVC windows are watertight and safe from drafts.

uPVC handles could also become loose. The majority of the time it is due to screws that have become loose over time. However, it can also happen because the handle mechanism has been worn out. It's relatively simple to fix a loose uPVC handle. First, you'll need to close the window and perform an initial test fit. The corners of the sash need to align with the casing joint. If it does not you can use a screwdriver to loosen up the handle. Then, you can turn the mechanism back into place.

3. Water Leaks

If you're waking up to wet floors and damp walls every time it rains it's crucial to take action. Leaks of water from windows can cause structural damage to your home, and affect your ability to regulate the temperature inside your home. Most often, upvc window repairs near me window leaks are caused by damaged or missing sealant.

It is a fairly easy fix that can be completed by any DIY expert. Depending on how serious the issue is, the old caulking might need to be removed. It is important to keep in mind that when it comes to uPVC window repairs you should avoid the temptation to "over-caulk' as this will only make the area more difficult to clean and reduce your energy efficiency.

Verify that the drainage holes have no debris in them and that the sill pan has been properly angled to allow the water to drain from the window. In more serious situations, you may have to replace the window.

Mold spots and rotten sills are another sign of water leakage. This mold thrives in damp environments and is able to quickly spread throughout the home.

If the leakage is occurring between the double-glazed glass it is more likely the problem is with the seal than the frame. It is also possible to be repaired by an upvc window repair window specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or loose and open in a breeze, it may be the hinges that are at the fault. Anyone who is a skilled DIYer can fix the hinges in a matter of minutes.

Like any mechanical component, hinges can be damaged over time. It is very easy to change the hinges on a window, but it's simpler if you have someone to help hold the frame.

It is also important to ensure that the uPVC hinges are being opened and closed in the correct direction. Look for the arrows that are on each hinge to determine which direction the window should be opened.

Faulty window hinges could be the result of incorrectly opening the window a certain way or by inadequate installation at the factory. It is usually possible to fix the issue by sending us a photograph via our website and we will be happy to give you advice.

It is also crucial to grease the hinges regularly. Applying an engineering lubricant that is light to the hinges is an ideal way to do this. We recommend using an oil that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can allow the window operate and close more smoothly. It can also lower the risk of a window getting stuck and stop corrosion. The ideal time to perform this every year. WD40 and other solvent based oils are not recommended because they can damage the parts of your uPVC window.

5. Draughts

Draughts in upvc windows can be caused by a variety of different factors. First, the hinges due to wear and tear may become displaced, which will cause a gap to form between the sash and the frame. These can be easily repaired by giving them good clean, but when they're beyond repair, it may be necessary to get them re-aligned or replaced. The interlock may be unbalanced. It is located on the hinge's side, and may need to be cleaned. In certain instances it might be necessary to replace the hinges.

The next most common reason for draughts are the window seals. They are prone to wear or damaged over time and allow air to escape through these gaps. Installing high-quality weatherstripping is a good way to stop draughts. Another alternative is to replace the upvc window with low-emissivity glass, this will help to regulate indoor temperatures and again will lessen the possibility of draughts.

Another, and most effective ways to reduce draughts is by using a draught excluder. These are typically made of fabric which are filled with a type of filler. They can be put on top of your windowsill. They can help block out cold air and keep your home warm and cozy!

Your upvc windows can continue to provide excellent insulation and security for your home with a little regular maintenance and repairs. It is crucial to keep in mind that all windows eventually get worn out and it may be cheaper to replace them rather than repair them. If you have any problems with your Upvc window you should consult a professional immediately.