• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a fantastic choice for modern homes. They are easy to maintain, durable and long-lasting. In contrast to aluminium and timber, they are not susceptible to rust or rot.

It is crucial to wash and oil UPVC windows and doors regularly. This will help prevent unnecessary repair costs and improve energy efficiency.

1. Broken Glass

The broken glass in your windows could cause significant damage to your home and even be fatal. It is crucial to take the time to ensure that you're doing all you can to keep your windows in good repair.

For single pane windows it is fairly easy to replace them, and the replacement will generally fit within the frame that was previously installed easily. If windows with double panes are joined by internal beading, it is harder to remove and replace the old panes. In this situation you'll need to locate some plastic spacers to help the new pane to fit perfectly into the window frame.

If you plan to try to remove the window panes yourself, it is essential to wear appropriate safety gear such as gloves that are thick and protective eyewear. You should also lay down a dropcloth prior to you begin working on the window panes to ensure that any shards fall onto the fabric and not onto the floor which could cause them to be trampled.

After the glass has been removed, it's a good idea to cover the gap with clear packaging tape or duct tape to prevent drafts and water from entering the home until a professional comes out and fix the window. It also acts as an obstacle to stop intruders from getting into your home. If the gap between the door and the window is large, you might want to use an alarm system that has an opening. This will give you the best of both.

2. Sagging

uPVC is a durable, energy-efficient and affordable alternative to timber sash windows. As time passes, they may develop a number of problems, including sagging. A window that is sagging can cause problems with light, draughts or even security. If you find that your uPVC window is beginning to lose its shape, it's important to act quickly to stop the issue from worsening.

Repositioning the hinges can aid in fixing a window that is sagging. To do this, you'll have to open the window to access the frame. After that, using the screwdriver, you'll be able to remove the hinges at the top and bottom and adjust them by turning them clockwise or anti-clockwise. Once you've adjusted the hinges, shut your window and check for an appropriate fit. If you are happy with the fit of your window, tighten the screws to secure them in place.

If you can't reposition the hinges, you might need to replace the seal. Rubber seals can dry out and lose their elasticity over time, leading them to lose their tightness. If this happens, it's essential to replace the seal as fast as possible to ensure your uPVC windows remain watertight and secure from draughts.

uPVC handles may also become loose. This is usually due to screws that have become undone over time, but it could also be due to the mechanism of the handle wearing out. It's fairly simple to fix a loose uPVC handle. You'll first need to close the window and perform a test fitting. The joint at the corner of the sash should align with the joint on the casing. If it doesn't then you can make use of a screwdriver to loosen the handle, and then reverse the mechanism back into position.

3. Water Leaks

If you're waking up to wet floors and mouldy walls each time it rains it's important to take action. Leaks of water from windows can cause structural damage to your home and affect your ability to regulate the temperature in your home. The most frequent reason for leaks in uPVC windows is that the sealant around the frame is damaged or is missing.

This is a relatively easy fix that can be completed by any skilled DIYer. Depending on how severe the issue is, old caulking may need to be removed. It is essential to keep in mind that when it comes to uPVC window repairs (https://highwave.kr/bbs/board.Php?bo_table=faq&Wr_id=2699349) you should not be tempted to apply too much caulk and then make the area more difficult to clean and can reduce the efficiency of your energy.

It is crucial to make sure that the drainage holes are clear of debris and that the sill pan is angled in a way that allows it to drain away from the window. In more serious cases, you may need to replace the window.

Other indicators of long-term water leakage are sills that are rotten and the appearance of black spots of mold on the walls near the window. The fungus thrives in conditions of dampness and can spread quickly throughout the home.

If the leakage is occurring between the double-glazed glass, it is more likely that the issue is related to the seal, not the frame. This can be easily corrected by a uPVC window specialist who will replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be the reason when your uPVC window is difficult to open, or if it opens in a breeze. These are easily repaired by any DIYer who is skilled and can be completed in a matter of minutes.

Nearly every home in the UK will have top-hung or side-hung uPVC windows that use hinges and like any mechanical part they are susceptible to wear and tear over time. Changing a window hinge is essentially a simple procedure, but it is easier if you have someone to help you hold the frame up.

Verify that the uPVC hinges are open and closed in the correct direction. Check for the arrows on each hinge to determine which direction the window should be opened.

The issue can be caused either due to opening the window in the wrong way or due to a poor installation at the factory. This issue can be fixed by sending us a photograph through our website and we will be more than happy to give you suggestions.

It is also crucial to lubricate the hinges on a regular basis. This can be done by applying a light engineering oil to the hinges. We recommend using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regular lubrication can allow the window to operate and close more smoothly. It also helps prevent corrosion and decrease the chance of sticking. This must be done at a minimum every year. WD40 and other solvent-based lubricants are not recommended as they could damage parts of your uPVC window.

5. Draughts

Draughts can be caused by a variety of different factors. The hinges, also because of wear and tear, can become misaligned, this will cause gaps to develop where the sash meets the frame. If they are damaged beyond repair, it may be necessary to have them realigned. Secondly the interlock, this is on the hinge side of the window and can be misaligned. Again, it's possible to just give them a good clean, but in some cases it might be necessary to have them replaced.

These seals are susceptible to wear and tear or get damaged over time, allowing air escape. This can be avoided by replacing them with high-quality weatherstripping. Replace the windows made of upvc with low-emissivity glass. This will help regulate indoor temperatures and decrease draughts.

Another, and most effective methods to reduce drafts is to use a draught excluder, these are usually fabric tubes filled with some type of filler. They can be put on the top of your windowsill. They will help stop cold air from entering and keep your home warm and cosy!

Your upvc windows can remain a great source of insulation and security for your home by performing regular maintenance and repairs. It is important to remember that all windows will eventually wear out and it could be cheaper to replace them rather than repair them. If you encounter any issues with your Upvc window you should consult an expert as soon as you can.