• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are an excellent choice for modern homes. They are durable, long-lasting and easy to maintain. Unlike timber and aluminium, they do not get rusty or decay.

It is important to clean and oil UPVC doors and windows regularly. This will reduce repair costs and improve the efficiency of energy.

1. Broken Glass

The damaged glass in your windows can cause severe damage to your home and may even be fatal. It is essential to make sure that your windows are in good condition.

For single pane windows, it can be relatively simple to replace windows, and the new one will generally fit within the old frame very easily. If you have double-paned windows that are held together by internal beading, it is harder to remove and replace the panes that were previously in use. In this situation, you will need to source some plastic spacers that help the new pane to fit correctly into the frame of the window.

Wearing eye protection and thick gloves is essential when you are planning to remove the glass by yourself. It is also an excellent idea to lay down a drop cloth prior to when you begin working on the glass, so that any shards fall on the fabric instead of landing on the floor, where they could be trampled on and cause further damage.

It's a great idea to cover the gap with tape after the glass has been removed. This will prevent drafts and water from entering your property until a professional comes out to fix the window. This will also provide an obstacle to stop intruders from getting into your home. If the distance between the door and the window is large, you might prefer an alarm system that has windows. This will provide the best of both.

2. Sagging

Upvc is a long-lasting and energy efficient alternative to timber sash window. As time passes, they may develop a variety of issues that include sagging. A window that isn't properly aligned can cause problems with light, draughts, and even security. It's crucial to act as soon as you realize that your uPVC windows are falling down.

Repositioning the hinges could help fix a window that is sliding. First, you'll need to unblock the windows so you can access the frame. You can then unscrew both the hinges on the top and bottom with a screwdriver and adjust them counter-clockwise or clockwise. Once you've repositioned the hinges, close your window repair and check for an appropriate fit. If you're satisfied with the fit, tighten the screws to ensure that they remain in place.

If you are unable to move the hinges, you might have to replace the seal. Rubber seals may dry out and lose their elasticity over time, which causes them to lose their tightness. If this happens, it's important to replace the seal as fast as possible so that your uPVC windows are watertight and secure from draughts.

uPVC handles may also loosen. The majority of the time this is due to screws that have come loose over time. However, it could occur because the handle mechanism has worn out. It's fairly simple to fix a loose uPVC handle. First, you'll need to close the window and then perform an experiment fitting. The corners of the sash should align with the casing joint. If it isn't then you can use the screwdriver to loosen up the handle. Then, you can turn the mechanism into position.

3. Water Leaks

It is crucial to take action if get up each morning to discover mouldy walls and wet floors. The leaks of water through windows could cause structural damage to your home and affect your ability to regulate the temperature of your home. The most frequent reason for leaking upvc window repair near me windows is that the sealant around the frame is damaged or not present.

This is a fairly simple fix that can be completed by any competent DIYer. Depending on how severe the issue is, the old caulking may have to be removed. It is essential to keep in mind that when it comes to uPVC window repairs, do not be tempted to apply too much caulk in order to make the area harder to clean and reduce your energy efficiency.

It is important to check that any drainage holes are clear of debris and that the sill pan is placed in a way that allows it to drain away from the window. In more serious instances, you may need to replace the window.

Mold spots and rotten sills are also signs of water leakage. This fungus thrives in damp conditions and can spread quickly throughout the house.

It is also important to remember that if the leak originates from the glass in your double glazed windows, it is more likely to be a problem with the glass seal, rather than the frame or sagging. A uPVC specialist can fix this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges may be to blame when your uPVC window is difficult to open, or if it opens with the breeze. Anyone with the skills to fix them can replace these in a matter of minutes.

Most households in the UK will have top-hung or side-hung uPVC windows that are hinged and, like all mechanical parts, they will wear out over time. The process of replacing a hinge on a window is an easy process, but it's simpler with someone else to help you hold the frame in place.

It is also important to verify that the uPVC hinges are being opened and closed in the correct direction. You can do this by looking for the arrow on each hinge. This indicates which way the window should open.

The issue could be caused either by opening the window improperly or due to a poor installation at the factory. This can often be resolved by sending us a picture through our website and we will be more than happy to give you advice.

It is also important to grease the hinges regularly. This can be accomplished by applying a light engineering oil on the hinges. We recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It can also lower the risk of a window getting stuck and stop corrosion. The ideal time to do this at least once a year. WD40 or other solvent-based oils should not be used as they can damage your uPVC windows.

5. Draughts

Draughts in Upvc windows can be caused by various factors. The hinges can also be disaligned as a result of wear, creating a gap between the frame and sash. If they are beyond repair, it might be required to realign them. Secondly the interlock, this is on the hinge side of the window and can be misaligned. Again, it may be feasible to give them a clean but in some instances it could be necessary to have them replaced.

The next most common reason for draughts is window seals. These are susceptible to being worn out or damaged over time, and allow air to escape through these gaps. Replacing these with high-quality weatherstripping will help to prevent draughts. Replace the upvc windows with low-emissivity lenses. This will help to regulate indoor temperatures and decrease the possibility of draughts.

Another method of reducing drafts effectively is to use a Draught-excluder. These are typically fabric tubes filled with a filler which can be hung over your window sill. These will keep your home warm by blocking out cold air.

Your upvc windows can continue to provide excellent insulation and security to your home with regular maintenance and repairs. It is essential to remember that all windows will eventually get worn out and it may be more cost-effective to simply replace them rather than repair them. If you have any problems with your upvc window you should consult a professional as soon as you can.