• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Do a Broken Car Key Repair

You're rushing to get to work, and jam your keys into the ignition. Then you try turning it around, and it breaks inside the lock!

There are a few ways you can attempt to resolve the issue before calling a locksmith. Here are some easy fixes. Super Glue.

1. Contact a locksmith

A broken key in the lock is among the most frustrating things a car owner can experience. This situation is even more difficult if it happens while the driver is trying to get to work or drop off the child. In this case you must act swiftly to try and remove the stuck key.

Contacting a professional locksmith is the best option as they will have the proper tools and know how to remove the keys broken without damaging the lock. Many people are looking for something that is thin and rigid like toothpicks or paperclips. However, this is not the best choice since they are too large to fit in the lock.

The best solution is to use a pair tweezers. They are lightweight and can easily reach inside the lock. They should also be rigid enough to hold the damaged part of the key and remove it. If you don't have tweezers, it might be worth looking for a set available at auto parts stores. They are narrow, flat and have hooks that are small. They can be inserted through the keyhole to take the broken portion of the key.

A magnetic key hook can be used to stick to the metal inside the lock, and then remove it. This is not always the best option as it could get caught in the lock and cause further damage. In this instance, it's best to call a professional locksmith.

Some people will try to glue the two pieces of their car key that have snapped together with superglue, as it will help them get it out of the lock. This could be risky as the metal pieces could snag and break later. It is important to not turn the key as this could cause further damage to the lock or ignition cylinder. It is best to contact a professional locksmith who will be ready to take out the damaged key and then make a replacement on the spot.

2. Drill into a hole

Sometimes a key breaks inside the lock, and even if you have an extra key, you may not be able to gain access to your vehicle. In these cases drilling the lock is the best option.

First, you must make sure the keyhole is set for a basic tumbler. If it isn't it, you will not be able to drill the pins without damaging the door and possibly destroying the internal lock mechanism.

The next step is to know that you'll be drilling through the outer plastic layer and an inner metal layer. A small drill bit will suffice to penetrate these layers, but you need to be sure not to go further than this. In the event of drilling too deep, it could damage the internal wiring harness, or cause the drill to stick.

It is also recommended to wear a mask and protective equipment when working with a drill. This will stop dust and dirt from getting into your lungs.

It is also a good idea to have pliers and tweezers in your possession in the event that the broken piece of the key is sticking out of the lock. If there is enough of the key to be able to grasp with tweezers or pliers, this will be sufficient to get it out of the lock. If not you'll need to use an instrument like this one to insert the tool in the lock and then rotate it towards the key to grip and pull it out of the hole.

3. Drill a nail

You could be left without a home in the event that you break your key in half. There are several solutions to fix it, without having to pay for a locksmith. The first option is to utilize a screw or nail. These are available at your home or at a hardware store. It is best to choose nails that are as thin and as long as you can. This will allow you to fit it into the hole and then use epoxy to link the two pieces together. It is also important to make sure the nail's back is flat. This will help it to fit in the cut slot of the key. This will stop it from moving and possibly breaking again in the future.

4. Super Glue

Many car owners tend to resort to DIY techniques like using super glue attempt to fix a damaged car key, however this is a dangerous option to make. You could end up ruining the lock and needing to pay more for getting a replacement from the dealership or locksmith.

First, you need to examine the keys that are broken and make sure they are identical in terms of size. This step is crucial to ensure that the glued pieces are properly aligned and that the mobile key fob repair fits into the lock after they have been bonded. After that, use a piece of sandpaper with fine-grit or a metal file to smooth out the edges of the broken pieces of the key. This will improve the glue's bond and reduce the possibility of a loose key.

After finishing the edges After polishing the edges, apply a small amount (about a pea-sized amount) of super glue on one side. Be cautious not to apply too much glue, as this could cause the key to become too heavy and will have difficulty fitting into the lock. After that, carefully place the two broken pieces of the key and press them together. After a few minutes the glue will begin to set and bond together the key fragments.

A bobby-pin or paperclip can also be used to extract a broken key from the lock. They can be cut like a pick and then inserted into the lock. This method is particularly useful if the break is near or inside the keyway or lock hole.

A broken car key with electronic components will require a new key from a locksmith or dealer. This is because the key will have to be programmed with a new code and the key chip needs to be replaced. However, if the metal or shell of the key breaks, it usually just requires an entirely new key cut, and doesn't require any replacement or reprogramming of the electronics.