• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Why is My Car Ignition Locked?

There are many reasons your ignition could be stuck. The key might be dirty or may have a damaged wafer inside it. This can be repaired by sliding the key into and out of the cylinder several times.

The pins of the lock cylinder may also be stuck. You can tap the cylinder gently using a small tack hammer.

Check the Battery

The transmission shifter switch may be malfunctioning when the car is in Park, neutral or won't start when the key is switched on. It is possible to fix the issue by moving the gear shifter upwards or downward to get the vehicle into the correct gear.

If the car is still unable to turn, the issue could be related to the neutral safety cable or the transmission shifter. This can be easily solved by a mechanic, or a local automotive locksmith.

It's also possible that the ignition cylinder is worn out. Over time the ignition as well as the key can wear out making them difficult to insert or remove. A lubricant, such as silicon lock grease can solve this issue, letting wafers to slide into place.

Lint from your pocket and adhesive from tapes that hold packages together can also build on the key, which prevents it from sliding into the ignition. You can clean the key with a cloth or a cleaner such as Triflow to resolve this issue. Also, you can use a spare key to determine if the issue is with the ignition or the ignition.

When the key is in the ignition you can tap it with a small piece of hammer. This can cause a slight vibration, which may be enough to loosen the wafers inside the ignition and allow them to slide in place. But, be careful not to damage the key or the ignition cylinder.

If none of the suggestions above work, you need to consult a locksmith for help in figuring it out. It could be that the key is damaged inside the ignition or it may be time to replace the whole thing. If the problem is with the key the locksmith will be able to create a new one for you. If the issue is with the ignition cylinder, your car will need to be brought to a repair shop in order to have it repaired. Fortunately, these issues are typically very simple to repair.

Check the steering wheel

A simple problem that can hinder the ignition from turning is the steering wheel being locked. It could happen if an individual driver is unintentionally engaged with the steering wheel when they exit or enter the vehicle. This is typically caused by yanking the wheel while resting it against their body. It can also happen if a passenger in the rear seat accidentally engages the brakes as they get out of the vehicle.

Fortunately it's a simple fix and does not require a trip to an expert locksmith ignition replacement cost or mechanic. First, ensure that the gear shift is either in neutral or Park. If it isn't, simply push or pull the shifter gently until it changes into one of these positions. It's also important to press the brake or turn on the handbrake prior to trying to turn the key.

If the wheel is not locked, a quick check of the steering column will determine if the key is engaged with the lock cylinder. A small "Lock label is typically located in the lower area of the ignition circle. It is easily removed by gently jiggling the lock or pulling it back with moderate force. It is crucial not to apply excessive force since this could damage the key or even tear a wafer from the lock cylinder.

A spare key can also be used to unengage the lock. This could mean that the original key is worn out and no capable of engaging the wafers in the lock cylinder. If this is the situation then a professional at Karl Chevrolet Webster City will be able to make a replacement key.

If the new key does not engage, a short spray of penetrating oil can help. Just apply a small amount around the ignition and keyhole, then tap or jiggle it until it starts to work. If this doesn't work you, you might need to seek out a specialist at your local dealership for cars. They'll be able provide you with a new key and replace the ignition cylinder if necessary.

Check the Key

If you are unable to get your key to turn the ignition, it is possible that something is wrong with your key. You can clean any foreign material (lint from packing tape or adhesive) from the key. You should also try rubbing alcohol or Goo Gone on the key to see if this aids.

If the pins in the lock aren't moving in a proper manner when you insert your key, it is possible that they are stuck. You can test the spare key by gently pulling it out of the ignition once you have put it in. You should be capable of hearing and feeling the pins move inside. If not, you can lubricate the pins with graphite powder. You can purchase graphite in small tubes that can be applied directly to the keyhole. This will allow the pins to slide into place as you insert the key and prevent them from becoming stuck.

A more serious issue with your key may be that it has become worn or damaged and is unable to engage the internal pins inside the ignition cylinder. This could cause the cylinder to stop to turn, preventing you from starting your car. In this instance you'll need to take your car to an auto repair shop or locksmith for assistance.

If you are able to turn your car Ignition lock (www.cheaperseeker.com) on with a spare key, and you have ruled out any problems with the battery or steering wheel it could be because the ignition cylinder has been worn out. It is possible to loosen the lock cylinder using the blunt end of a screwdriver or the handle of a Hammer (not the head). A gentle tap on the cylinder can often release it which allows you to turn your key and start your car. If this does nothing, you'll need to have the lock cylinder replaced by a mechanic.

Check the Ignition Socket

The ignition socket is where your key can slide in and out when inserted. It could get blocked with dust, or simply wear and tear. Try putting some silicon lock lubricant (like WD-40) into the ignition to make things move forward.

You can also employ a small hammer and gently tap the inside of the ignition cylinder, to try to loosen or reset the pins that may be out of alignment. Be careful not to overdo it, or you could cause serious damage to the ignition switch.

Before you try this, make sure that the car's gearbox is in neutral or park. A lot of newer cars come with an option to lock the steering wheel when it is not in park or neutral that can stop the key from being turned into the ignition.

If you've done all of this and still can't get your key to turn it is likely that the ignition cylinder housing is in need of replacement. Different vehicles have different methods for replacing the ignition cylinder, therefore it is essential to follow the correct procedures.

Generally, this involves removing the plastic cover that is placed over the steering column and ignition assembly. To remove this cover, you will need to first adjust the tilt-wheel to the lowest setting and then remove any fasteners that are holding it in place.

After the cover has been removed, you'll need to remove the old ignition cylinder off the steering column. Then, you'll need to compare the new ignition cylinder that you purchased with the one you removed to ensure that they are the same. Once this is done the new ignition cylinder is able to be installed in the same manner that the previous one was removed.

It is possible that, despite our best efforts, the ignition may become damaged and need to be replaced. It is suggested that if this happens you contact an Tempe Locksmith. A locksmith can help you select the best replacement and ensure it is installed correctly so that your vehicle can start again.