• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are an excellent choice for modern homes. They are easy to maintain, durable and long-lasting. They do not rot or rust like timber and aluminum.

Cleaning and lubricating regularly UPVC windows and doors is vital. This will save you from unnecessary repair costs and improve the efficiency of energy.

1. Broken Glass

If the glass in your window is damaged, it could cause a large deal of damage to your home, making it extremely dangerous and possibly fatal. It is important to ensure that your windows are in good working order.

Single-pane windows are fairly simple to replace, and they typically fit into frames that were previously in use very easily. However when you have double-pane windows that are held in place by internal beading it will be more difficult to get rid of the existing panes and install new ones. In this case you'll need locate some plastic spacers to help the new pane to fit properly into the frame of the window.

If you are going to attempt to remove the window panes by yourself, it is essential to wear the appropriate safety equipment, including thick gloves and eye protection. It is also recommended to lay down a dropcloth prior to you begin working on the window panes to ensure that any shards of glass fall onto the fabric, not onto the floor and could be trampled under.

Once the glass is removed, it's a good idea to seal the gap with some clear packaging tape or duct tape to prevent water and drafts from entering the property until a professional can come out and fix the window. This will also act as a barrier that will prevent any intruders from gaining entry to your home. If the gap is large, you might want to consider using a security door that has an integrated window as this will offer the best of both worlds.

2. Sagging

Upvc windows and doors are a cost-effective energy-efficient, durable and long-lasting alternative to timber windows with sash. However, with time, they can suffer from a variety of issues like sliding. A window that isn't properly aligned can cause problems with light, draughts or even security. If you find that your uPVC window is beginning to sag it is important to act swiftly to stop the issue from getting worse.

To repair a window that is sagging, you can try to reposition the hinges. To accomplish this, you'll have to open the window to access the frame. After that, using an screwdriver, unscrew the top and bottom hinges and adjust them by turning them clockwise or counter-clockwise. Once you've adjusted the hinges, close the window and check for fit. If you're satisfied with the fit, tighten the screws to ensure that they remain in position.

If you cannot reposition the hinges, you may have to replace the seal. Seals made of rubber can dry out and lose their elasticity with time, which causes them to lose their tightness. If this happens, it's crucial to replace the seal as quickly as you can to ensure that your uPVC windows are watertight and safe from drafts.

uPVC handles may also become loose. This is often caused by screws that have loosened over time, but it can also be due to the handle mechanism wearing out. It's relatively simple to fix a loose uPVC hand. First, you'll need to shut the window and perform an experiment fitting. The corners of the sash must be aligned with the casing joint. If it doesn't, you can use a screwdriver to loosen the handle and then turn the mechanism back into its original position.

3. Water Leaks

It is essential to take action if get up each morning to discover mouldy walls and floors that are wet. Water leaks through windows can cause structural damage to your home, and affect your ability to regulate the temperature of your home. Most often, uPVC window leaks are caused by damaged or missing sealant.

This is an easy fix that can be done by any DIYer who has the ability. Based on the severity of the issue the old caulking may need to be removed before a fresh layer is applied. It is important to remember that when it comes to uPVC window repairs you should avoid the temptation to "over-caulk and then make the area more difficult to clean and reduce your energy efficiency.

Check that any drainage holes have no debris in them and ensure that the sill pan is properly angled to allow the water to drain from the window. In more serious instances, you might have to consider replacing the window.

Mold spots and rotted sills are other signs of water leakage. The is a fungus that thrives in damp conditions and is able to quickly spread throughout the house.

It is also important to keep in mind that if the leak originates from the glass in your double glazed windows it may be more likely to be a problem with the glass seal rather than the frame or sagging. Again this can easily be fixed by an uPVC window expert who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or slack and open with a breeze, it may be hinges at fault. They can be easily repaired by any skilled DIYer and can be completed in a matter of minutes.

Most households in the UK will have either top hung or side hung uPVC windows that are hinged and, like all mechanical parts, they are susceptible to wear and tear over time. It is an easy process, but it's easier to do when you have a person to assist in holding the frame in place.

Make sure that the upvc window repair hinges are open and closed in the right direction. Look for the arrows on each hinge to determine which way the window should be opened.

The problem can be caused either by opening the window incorrectly or by a poor installation in the factory. Sending us a photo via our website will often solve the issue. We are always happy to provide suggestions.

Regularly lubricating hinges is also essential. Applying an engineering lubricant that is light to the hinges is an ideal method to accomplish this. We recommend using an oil that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regularly lubrication will help the window to operate and close more smoothly. It can also reduce the possibility of a window sticking and help prevent corrosion. The ideal time to perform this every year. WD40 and other solvent-based lubricants should not be used since they could damage your uPVC windows.

5. Draughts

Draughts can be caused by several different things. First, the hinges due to wear and tear may become displaced, which causes an opening to appear between the sash and the frame. If they are beyond repair, it may be necessary to have them realigned. The second is the interlock, which is located on the hinge of the window, may be misaligned. Again, it may be feasible to give them a good clean, but in some cases it might be necessary to get them replaced.

These seals can wear down or get damaged over time, allowing air to escape. Replacing these with high-quality weatherstripping can help prevent draughts. Another option is to replace the upvc window with glass that is low-emissivity, this will help in regulating indoor temperatures and will reduce draughts.

Another method of reducing drafts effectively is to use a draught-excluder. These are usually fabric tubes filled with a filler, which can be placed over your window sill. They can help keep cold air out and keep your home warm and cozy!

The windows made of upvc can keep providing excellent insulation and security for your home with regular maintenance and repairs. It is essential to remember that all windows will eventually get worn out and it could be more cost-effective to replace them than to repair them. If you are experiencing issues with your upvc window, it's best to consult a professional immediately.