• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is an excellent choice for modern homes. They are durable, long-lasting and easy to maintain. In contrast to aluminium and timber, they are not susceptible to get rusty or decay.

Regularly cleaning and lubricating UPVC windows and doors is essential. This will reduce costly repairs and improve the efficiency of energy.

1. Broken Glass

The broken glass in your windows could cause serious damage to your home and even be fatal. It is crucial to take the time to make sure that you're doing everything you can to ensure that your windows are in good condition.

Single-pane windows are relatively simple to replace and typically fit into frames that were previously in use very easily. If windows with double panes are joined by internal beading, it is more difficult to remove and replace the old panes. In this case it is essential to purchase plastic spacers in order to help the new pane fit into the window frame.

If you're planning attempt to remove the glass panes yourself it is important to wear the appropriate safety equipment such as gloves that are thick and eye protection. You should also lay down a drop cloth before you begin working on the window panes so that any shards fall onto the fabric, not onto the floor and Upvc window repair could be trampled.

Once the glass has been removed, it's a good idea to cover the gap with some clear packaging tape or duct tape to prevent water and drafts from entering the property until a professional comes out and fix the window. It also acts as a barrier to prevent any criminals from getting into your home. If the gap between the door and the window is large, you might want to use security screens that has an opening. This will give you the best of both.

2. Sagging

Upvc is a long-lasting energy-efficient, cost-effective and economical alternative to timber sash windows. Over time, they can develop a variety of issues such as sliding. A sagging window can cause problems with light, draughts, and even security. If you find that your uPVC window is beginning to lose its shape, it's crucial to act fast to prevent the problem from worsening.

Repositioning the hinges could aid in fixing a window that is sliding. You'll first need to open the windows to get at the frame. Then, remove both the top and bottom hinges using a screwdriver and adjust the hinges clockwise or counter-clockwise. Once you've repositioned the hinges, shut your window and test it for fitting. If you're satisfied with the fit, you can tighten the screws to ensure they remain in position.

If you cannot reposition the hinges, you might need to replace the seal. Rubber seals may dry out and lose their elasticity with time, which causes them to lose their tightness. It is important to replace your seal as quickly as you can in order to keep your uPVC window watertight and draughtproof.

uPVC handles could also become loose. Most often this is due to screws that have come loose over time. However, it could be due to the fact that the handle mechanism has been worn out. Fortunately, it's easy to repair the loose uPVC window handle yourself. First, you'll need to close the window and then perform an initial fitting. The joint at the corners of the sash should align with the joint on the casing. If it doesn't then you can use the screwdriver to loosen the handle. Then, turn the mechanism to position.

3. Water Leaks

It is important to act if you get up each morning to find a smoky wall and wet floors. Windows that leak water do can not only cause degradation of your home's structure but also hinder your efforts to regulate the temperature inside your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.

This is a relatively easy fix that can be completed by any skilled DIYer. Depending on the severity of the issue is, old caulking might need to be removed. It is important to keep in mind that when it comes to uPVC window repairs, do not be tempted to 'over-caulk and then make the area more difficult to clean and reduce your energy efficiency.

Verify that the drainage holes have no debris in them and ensure that the sill pan has been angled correctly to drain away from the window. In more serious cases you might need to consider replacing the window.

Other indicators of long-term water leakage are decayed sills and the appearance of black spots of mold on the wall near the window. This is a fungus that thrives in damp conditions and can quickly spread throughout the home.

It is also important to remember that if the leak is coming from between the glass in your double glazed windows it may be more likely to be a problem with the glass seal rather than the frame or sliding. A uPVC specialist can fix this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or are loose and blow open in a breeze It could be hinges at fault. Anyone who is a skilled DIYer can fix hinges in just a few minutes.

Like any mechanical component hinges will wear out over time. Changing a window hinge is an easy process but it can be easier with someone else to help you hold the frame up.

Check that the uPVC hinges are open and closed in the correct direction. You can do this by looking for the arrows on each hinge. This shows which way the window should be opened.

Window hinges that aren't working properly could be caused by improperly opening the window in a certain way or due to inadequate installation at the factory. It is usually possible to fix the issue by sending us a photo via our website and we will be more than happy to give you suggestions.

It is also essential to lubricate the hinges regularly. Applying a light engineering lubricant on the hinges is a great method of doing this. We recommend using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It can also lower the possibility of a window sticking and prevent corrosion. The ideal time to perform this every year. WD40 or other solvent-based lubricants are not recommended as they can cause damage to your uPVC windows.

5. Draughts

Draughts in Upvc windows can be caused by a few various factors. The hinges can also be unbalanced due to wear, causing an opening between the frame and sash. These can be easily repaired by giving them good clean, but when they're beyond repair, it might be necessary to have them aligned or replaced. Secondly the interlock, this is on the hinge side of the window and can be misaligned. Again, it's possible to just give them a thorough clean, however in certain cases, it may be necessary to get them replaced.

These seals can wear down or become damaged over time, allowing air to escape. Replacing these with high-quality weatherstripping can help prevent draughts. Another alternative is to replace the window with low-emissivity glass, this will help to regulate indoor temperatures, and also lessen draughts.

The final method to cut down on draughts effectively is by using a draught-excluder. These are usually made of fabric tubes filled with a filler which can be placed over your window sill. They can keep your home warm by blocking cold air.

Your windows made of upvc will remain a great source of insulation and security for your home with regular maintenance and repairs. It is crucial to recognise that windows last for a certain period of time and they may reach an point at which it is more economical to replace them than fix them. So, if you are experiencing issues with your upvc window repair windows, it is always recommended to seek assistance from a professional as soon as possible.