• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are an excellent option for modern homes. They are long-lasting, durable and easy to maintain. Unlike timber and aluminium, they don't rust or rot.

Cleaning and lubricating regularly UPVC windows and doors is crucial. This will help prevent unnecessary repair costs and also improve the efficiency of energy.

1. Broken Glass

The broken glass in your windows could cause significant damage to your home and even be fatal. It is essential to take the time to ensure that you're doing everything you can to keep your windows in good shape.

For single pane windows it can be relatively simple to replace them, and the replacement is usually able to fit into the frame of the previous one easily. If windows with double panes are joined by internal beading, it is more difficult to remove and replace the old panes. In this instance it is essential to purchase plastic spacers in order to aid in fitting the new pane into the window frame.

If you are going to attempt to remove the window panes yourself it is important to wear appropriate safety gear such as gloves that are thick and eye protection. It is also recommended to lay down a drop cloth before you begin working on the window repairs near me panes, so that any shards fall on the fabric and not onto the floor and could be trampled.

It's a great idea tape the gap once the glass is removed. This will stop drafts and water from entering your home until a professional arrives to repair the window. This also serves as an obstacle to stop intruders from getting into your home. If the gap is particularly large, you might want to consider using a security door that has an integrated window, since it offers the best of both worlds.

2. Sagging

uPVC windows and doors are a low-cost, durable and energy-efficient alternative to timber sash windows. However, over time they can suffer from a variety of issues like sagging. A window that isn't properly aligned can cause problems with light, draughts and even security. It's crucial to act as soon as you discover that your uPVC windows are falling down.

Repositioning the hinges could aid in fixing a window which is sagging. To accomplish this, you'll have to open the window to access the frame. Then, remove both the hinges at the top and bottom using a screwdriver, and then adjust the hinges clockwise or counter-clockwise. After you've repositioned the hinges, shut your window and test it for an appropriate fit. If you're satisfied with the size of the window, tighten the screws to keep them in place.

If you cannot reposition the hinges, you may need to replace the seal. Rubber seals may dry out and lose their elasticity over time, which causes them to lose their tightness. If this happens, it's crucial to replace the seal as soon as possible to ensure your uPVC windows are waterproof and draught-proof.

uPVC handles could also become loose. The majority of the time this is due to screws that have come loose over time. However, it could be due to the fact that the handle mechanism has been worn out. It's a good thing that it's simple to fix the handle of a window that is loose yourself. First, you'll need to close your window and do an initial test to ensure that it fits. The corner joints of the sash need to be aligned with the casing joint. If it doesn't, you can use a screwdriver or a wrench to loosen the handle, and then reverse the mechanism back into the position it was in.

3. Water Leaks

If you wake up to damp floors and mouldy walls every time it rains it is important that you take action. The leaks of water through windows could cause structural damage to your home, and hinder your ability to control the temperature of your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.

This is a fairly simple fix that can be done by any skilled DIYer. Depending on how serious the problem is, the old caulking might need to be removed. It is important to keep in mind that when it comes to uPVC window repairs, you should not be tempted to 'over-caulk in order to make the area harder to clean and can reduce your energy efficiency.

Make sure that the drainage holes have no debris in them and ensure that the sill pan has been properly angled to drain away from the window. In more extreme situations, you may have to replace the window.

Mold spots and rotted sills are other signs of water leakage. This fungus thrives in damp conditions and can spread quickly throughout the home.

If the leakage occurs between the double-glazed glass it is more likely that the problem is with the seal than the frame. This can be easily repaired by a uPVC window repairs near me specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or are loose and open with ease it could be the hinges that are at the fault. They can be replaced by any competent DIYer and can be done within a few minutes.

Like any mechanical component, hinges can wear out over time. It's easy to change a window hinge, but it's simpler if you have someone to help hold the frame.

Make sure that the uPVC hinges are closed and open in the correct direction. Look for the arrows on each hinge to determine the direction in which the window should be opened.

Window hinges that aren't working properly could be caused by improperly opening the window in a particular way or due to poor installation at the factory. It is usually possible to fix the issue by sending us a photo through our website and we will be happy to give you advice.

It is also essential to lubricate the hinges regularly. This can be accomplished by applying an oil that is light in nature to the hinges. We recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication can allow the window operate and close more smoothly. It can also prevent corrosion and decrease the chance of sticking. This is recommended to be done at least once a year. WD40 and other solvent based oils are not recommended because they can damage the parts of your uPVC window.

5. Draughts

Draughts can be caused by different factors. The hinges may also become unbalanced due to wear, creating gaps between the frame and sash. They can be repaired by giving them thorough clean, however in the event that they are beyond repair it could be necessary to get them aligned or replaced. The interlock may be disaligned. It is located on the hinge side and may need to be cleaned. In some instances, it may be necessary to replace these.

The second most frequent cause of draughts is the window seals. They can become worn down or damaged over time, and allow air to escape through the gaps. Installing high-quality weatherstripping will help to keep draughts at bay. Another option is to replace the window with low-emissivity glass. this will help in regulating indoor temperatures, and also lessen the risk of draughts.

Lastly, one of the most effective methods to reduce the draughts in your home is to use a draught excluder, Window Repairs these are usually fabric tubes filled with some sort of filler and can be positioned on the top of your windowsill. These will help to keep cold air out and keep your home warm and cosy!

With a little maintenance and repair, your upvc windows will provide an excellent level of insulation and security for your home. It is crucial to keep in mind that all windows will eventually get worn out and it could be more cost-effective to simply replace them instead of fixing them. If you encounter any issues with your upvc window you should consult an expert as soon as possible.