• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

What Is Secondary Glazing?

Secondary glazing is a cost effective method to increase the efficiency of thermal energy and reduce the noise level of single-glazed windows that are already in use. Unlike replacement glass double glazing primary window units, it doesn't require the removal of frames from the existing ones and is more suited to period properties.

A reputable company will be able to offer follow-up support following installation. They might even call you a few weeks later to see how things are going. They must also be FENSA accredited and offer a product warranty.

Improved thermal efficiency

By adding secondary glazing to your windows can help reduce the loss of heat and also eliminate drafts. It can also make your home more comfortable and peaceful. It is important to remember that this solution is not a replacement for triple or double glazing and will give a slight boost in energy efficiency.

Glass isn't a good insulation however, an air layer or sometimes argon gas between two panes of glass can help to slow down the transfer of heat from cold to warm and reduce condensation. Double-glazed windows that have an insulation layer between the panes can prevent cold air from entering your home and will keep warm air inside.

There is a broad range of options available and some are designed to be installed as a DIY kit and others require professional installation. There are systems that can be fitted to sliding sash windows, as well as other frames that are pre-existing Some slide open or close, and some that are fixed to the wall.

The most cost-effective type of secondary glazing is the 'lift out' system, which is fitted inside the existing window and lifts out of a secured channel. This is the best option for a sash windows or when access to the primary windows is limited.

Based on the quality of the glass employed and the type of gap between the primary and secondary windows, some products may provide higher insulation levels than others. The wider the gap between two panes and the greater the thermal performance.

In some situations the secondary glazing may improve the thermal efficiency of a house to the point where it is comparable to the insulation offered by the newer double or even triple glazed windows. This is especially true for older properties, where planning restrictions restrict the kind of replacement glass in double glazing window that can be put in place. In these situations it is possible to use secondary glazing to insulate old sash windows may be the only option that is cost effective.

Reduced noise

Windows let a lot of noise into homes. This is particularly a problem for those who live close to railway lines or flight paths. In these situations, upgrading to new double glazing will greatly reduce the impact of external sound on a property. However it is not always feasible or can afford to replace all their windows and this is the place where secondary glazing is required. This is when you add an additional window to the existing frame of a home. This second window will provide an additional (sealed), barrier that helps to protect your home from cold air, as well as external noise.

Noise pollution is a significant problem that could cause long-term harm to your health if you don't take action to address it. Ecoease offers a low-cost alternative to cut down on the amount of noise from outside that could enter your home. Our secondary double glazing is an excellent solution for those looking to reduce noise pollution without having to spend a fortune to replace all their windows.

The main benefit of secondary glass is that it creates a barrier between your house, and the outside world. This reduces noise pollution. This is achieved by installing an independent pane and frame within the window itself at the distance of about 100mm. The secondary window is not as large as the primary one, the secondary window can be opened and closed to provide airflow.

This additional barrier helps to keep a room warm from cold air that would otherwise escape through the window and down the wall. This helps keep the room warm and reduce energy costs.

The secondary glazing can also help to cut down on the noise of traffic and activities outside. Having the extra barrier between your home and the outside world can be an enormous comfort factor and something that will bring a significant change to your daily life.

The system can be fitted on almost any window type such as the sliding sash vertical windows, and sliding doors. It can be applied to individual windows or multiple windows in a home and is a far cheaper option than replacing all your existing windows. It also preserves the look of your property and can be a more sympathetic option for buildings with listed structures where changing windows could compromise their appearance.

Increased security

Some people assume that double glazing is an expensive option, but this isn't always the situation. You can buy secondary glazing for less than you would think, especially when you consider that it's an effective security measure. It is not only an effective barrier, but also provides insulation. This makes it difficult for burglars to get through. Installing secondary glazing is a better choice than replacing windows which can be a challenge in some instances and require permission to plan.

Secondary glazing is designed to fit inside the frames of your windows unlike new windows which can be customized to suit any home. It's a straightforward solution that offers several advantages, including reduced costs for energy and improved comfort. It can also increase the security of your home by making it less noisy.

If you are looking for secondary glazing in your area it is important to be aware of the quality of the product and the services offered by the installers. Ask about their insurance certificates, certifications and guarantees. It is also important to consider how long they've been in operation. Choosing an experienced company can assist you in ensuring that the work is done correctly and efficiently.

Secondary glazing offers the main benefit of reducing heat loss and improving draught proofing by creating a secondary window behind the existing windows. This second pane functions as an insulation layer that reduces heat loss and reduces noise intrusion. This is a cost-effective option to upgrade your windows without having to replace them.

If you live in an older home with single-glazed windows, you're likely to spend a lot of money on heating and cooling. Glass is a good conductor of heat. This means that you are losing electricity or hot water through your windows when trying to stay warm during winter.

The best method to deal with this problem is to invest in some secondary glazing. This kind of window treatment will be much cheaper than installing new window units and provide you with a variety of advantages, such as improved insulation, less energy costs and increased security. You can even choose from a variety of different styles, such as hinged units and secondary glazing that lifts out.

Improved appearance

One of the major concerns for many homeowners is the effect replacing their windows will impact the appearance of their property. Secondary glazing can increase the thermal efficiency of double glazing without affecting the appearance. The installation process is a much easier process than replacing the windows from the beginning and can be completed much faster, too.

The process involves an independent frame and pane, which are placed on the inside of the window, usually leaving a gap of around 100mm between them. This acts as an obstruction to heat loss and the rubber seals aid in separating the window from the space and limit the transmission of sound. It is a great way to improve insulation in period buildings in areas where planning restrictions prevent the use of double-glazed units.

There are a variety of different styles of secondary glazing that are available to meet your needs and requirements, from systems that can be opened just like windows (hinged secondary glazing) to those that are set within the existing sash frame and are fixed in place. Some are designed to be as subtle as possible, with frames that are concealed from view and are unobtrusive inside. These are useful when regular ventilation is needed and opening the sash can pose an health and safety risk.

Certain companies offer permanent aluminium secondary glass that can be put on the outside of your windows, which will provide greater energy efficiency and a fresh look. This is a viable option for listed or historic buildings. It can also be cost-effective if you are on a tight budget. You can select the woodgrain or Download free colour to match the house to make it appear as if it's been there for a long time.

Whatever kind of secondary glazing you choose it is essential to choose a business with experience in the type of home you want and has a great reputation for customer service. It is also worthwhile looking through online reviews and seeking recommendations from family and friends. You should also check whether the company is a member of professional organizations, such as the Glass and Glazing Federation.