• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

window repair Sash Repairs

Sashes for windows must be checked regularly for mold, mildew and damage. You can save future repair costs by catching the issues early, before they become out of control.

The sash is an interior framing that can be moved vertically upwards or downwards in windows that open. This article will show you how to perform several simple repairs to sash.

Weather Stripping

Wooden window sashes can add an elegant appearance to your home. They are also sturdy and will last for many years when they are maintained properly. They can, however, be damaged or degraded over time due to exposure and normal wear and tear. However, sash repair experts can restore your windows back to their original condition and keep them looking great for a longer period of time than replacement windows.

The first step to sash window repairs is addressing weather stripping, which is found on both the sash and frame. If it's loose or worn out, it can cause drafts and other problems. Start by identifying the window's brand and the glass manufacturer's date (etched on the corner of the glass or the aluminum spacers between panes). Then, remove the sash and mark its height and width, so you can find the appropriate weather stripping replacement to match.

Then, you can remove the sash from the holder and place it on an even surface that allows you to reach all four sides. If your sash has been double glazed window Repairs near me-hung, you must remove the ropes and weights that should be buried in the jamb lining. After removing the sash using the utility knife, you can remove the weather stripping from the old sash by hand or using the putty blade.

Once the sash has been cleared, you can replace the stoppers that separate the two sashes. These are long pieces that split the sashes. Pam prefers standard 1/2-inch by 3/4-inch window trim from the lumberyard. However, you can also substitute with a scrap piece of wood.

After removing the stoppers for parting and cutting them to the desired length then apply a thin layer of glazing compound over the bottom of the sash. Smooth the compound using a putty tool and allow it to dry for at least one day. After it has fully dried then apply a top coat of acrylic latex paint. This will help protect the putty and give your sash a modern appearance.

Sash Hardware

The hardware that supports window sashes is prone to wearing out from the wear and tear of use and the result could be a window or door that can't be opened or double glazed window repairs near me closed easily. The good news is that repairing and replacing this hardware is typically relatively easy and affordable. If you are having trouble opening the sash, spray some oil into the jamb channel. Then, slide the sash up and open to see if it resolves the issue. If the problem persists it's most likely that the sash balance is off. You'll need to remove the window sash to access the hardware.

The ideal situation is for window sashes to move open and shut with minimal effort however, this can be a difficult task if the weights become worn or if the sash's meeting rail isn't properly glazed. This problem could be caused by various reasons such as an absence of maintenance or a mismatched weight rating.

If the hinges on a window begin to sag this could cause the sash to drag and then hit the frame at the opposite corner (Photo 1). To remedy the issue make sure the sash is in the proper position within the frame's opening and remove it. If the sash was fixed to the hinge arm, take it off the hinge and replace it. (Photo 2). Install the new sash next (Photo 3).

Windows that are old, especially in older homes, can be difficult to open and close due to hinges that are sagging and a general inefficiency. In many instances, a few easy repairs can turn these windows into smooth operation and save homeowners money on energy costs.

It is important to have the tools you require before you start. Begin by marking the location of the hinge channel on the frame using a pencil (Photo 1). This will assist you in getting the channel back into place correctly when you're finished. Remove the sash and take out all the hardware, including the parting beads, cords, and chains that hold the sash in place. A hot gun with nozzle shield and a medium setting will soften any hardened glue. Remove the old sash, and keep it in a labeled bag.

Sash Weights

Sash weights can be replaced to improve the operation of your window sash and decrease the energy cost. Sash weights are heavy, lead or iron cylinders that are enclosed in a hidden cavity and connected to the movable the sash with a rope. They provide counterbalance which allows the window to be closed and opened without using mechanical or electrical devices. The sash-weights are typically disregarded or disabled by homeowners and turned into scrap when they break; therefore, you may need to find replacements.

It's not easy to retrieve an sash-weight which has fallen from the cavity, so you'll want to find one that fits properly. You will also need a new piece of string, a length of sash cord, and a few sash pulleys to tie the new sash weights onto the sash cord.

Older wood windows are joined by mortise and tenon joints. Hammers and pins can be used to cut off the wood pegs that hold the parts together. Most of them have large diameters on one side and a smaller one on the other side, so it is important to remove the smaller-diameter ones first. Later sashes used glue instead of pins. They can be cut by using a knife or mallet.

Once the sash is freed then you can take out the sash stop and gain access to the weight pocket. This is typically done by drilling a small hole at the bottom of each jamb. This hole is covered with the wooden panel which can be removed to reveal the interior workings.

After you have the sash stopped and the access panel removed, you will be able to take off the old sash weight and replace it with new. First, weigh the sash, as the weights you've got may not be the correct size. Once the new weight has been installed, thread a string through the sash pulling mechanism. Then attach the string to the boxed frame, but leave a few inches of string hanging from the head to allow for future adjustments.

Sash Cords

In most old double-hung window, a cord or chain is attached to the weights. This supports and keeps the sashes within the jamb balanced. As time passes, these cords may break, making it impossible to raise the window. A new sash cord will restore the ability to move the sash upwards and downwards and will keep it in its position when it is opened.

The first step to replace sash cords is to find and take out the access panels located in the jambs. These are usually attached by nails or screws and must be removed. You could use a hammer and chisel for removing them however, it is always best to lay down dust sheets prior to starting any work.

After you have removed the access panel, you are able to begin working on the sash. Make the small parting beads (also known as "tie rails") out of their grooves using the chisel or flat bar. It is essential to take your time, as these are often wedged or nailed in place. If the sash remains in place, break the mortise and tenon joints using a hammer and pin punch or screwdriver, then unhook the wood pegs on each piece. It should now be possible to move the sash back and forth freely, although it may require oil if it feels stiff.

With the sash open, measure enough sash cord/chain to extend from the pulley at the top of the jamb to the sash slot in the bottom. Cut the chain or cord and attach it in the previous step. You can either employ a hammer and screws or double glazed window repairs near me nails, however nails are less likely to cause damage.

It's best to leave the original weights if you have purchased a kit to replace the counterbalance. It's not expensive to buy these from salvage shops for architectural purposes and they'll be easy to install once you've got the sash open. Depending on the size of your window, one or two sash weights may be needed to keep it in an open position.