• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is an excellent option for modern homes. They are durable, long-lasting and easy to maintain. They are not susceptible to rot or rust like aluminum and timber.

Cleaning and lubricating regularly UPVC windows and doors is essential. This will reduce unnecessary repair costs and improve energy efficiency.

1. Broken Glass

The broken glass in your windows could cause significant damage to your home and even be fatal. It is important to ensure that your windows are in good working order.

Single-pane windows are relatively simple to replace and generally fit into old frames very easily. If windows with double panes are joined by internal beading, it will be harder to remove and replace the panes that were previously in use. In this case, you will need to locate some plastic spacers that aid the new pane in being able to fit properly into the window frame.

Wearing eye protection and thick gloves is a must for anyone who plans to remove the glass yourself. You should also lay down a dropcloth before you begin working on the window panes, so that any shards of glass fall onto the fabric, not onto the floor which could cause them to be trampled under.

It's a great idea seal the gap after the glass has been removed. This will stop drafts and water from entering your property until a professional is able to repair the window. This also serves as an obstacle to stop intruders from getting into your home. If the gap between the window and the door is large, you might need to consider an alarm system that has a window. This will give you the best of both.

2. Sagging

uPVC windows and doors are a low-cost energy-efficient, durable and long-lasting alternative to timber windows made of sash. Over time, they can develop a number of problems, including sagging. A sagging uPVC window can cause problems with light, draughts and even security. It's important to take action as soon as you discover that your uPVC windows are sagging.

Repositioning the hinges could help fix a window that is sagging. To accomplish this, you'll need open the window so that you can access the frame. After that, using a screwdriver, you can remove the hinges on the top and bottom and adjust them by turning them clockwise or anti-clockwise. After you've repositioned the hinges, shut your window and test it for fit. If you're happy with the fit, you can tighten the screws to ensure they remain in the right place.

If you can't reposition the hinges, you may require replacing the seal. Seals made of rubber can dry out and lose their elasticity over time, which causes them to loosen. It is important to replace your seal as soon as you can in order to ensure that your upvc window Repair window watertight and draughtproof.

uPVC handles may also loosen up. Often this is due to screws that have become loose over time. However, it could occur because the handle mechanism has worn out. It's a good thing that it's simple to repair the loose uPVC window handle yourself. First, you'll need to shut the window and then perform an initial fitting. The joint at the corner of the sash must align with the joint on the casing. If it doesn't, you can use a screwdriver or a wrench to loosen the handle and then turn the mechanism back into position.

3. Water Leaks

If you wake up to wet floors and mouldy walls each time it rains, it's crucial to take action. Leaks of water from windows can cause structural damage to your home and also impact your ability to regulate the temperature of your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.

It is a fairly easy fix and should be undertaken by any skilled DIYer. Depending on the severity of the problem the caulking used previously might need to be removed before a new layer is applied. When it comes to uPVC repair, you must avoid over-caulking. This will make your window more difficult to clean and decrease its energy efficiency.

Make sure that the drainage holes are free of debris in them and that the sill pan is angled correctly to drain away from the window. In more serious situations, you might have to consider replacing the window.

Moldy sills and rotten ones are also signs of water leakage. The mold thrives in damp environments and is able to quickly spread throughout the home.

It is also important to note that if the leak originates from the glass of your double glazed windows, it's more likely to be a problem with the glass seal rather than the frame or sliding. A uPVC specialist can easily fix this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or are loose and blow open with ease, it may be the hinges that are at fault. They can be easily repaired by any DIYer who is skilled and can usually be completed in a matter of minutes.

Nearly every home in the UK will have either top hung or side hung uPVC windows that are hinged and like any mechanical part they can wear down over time. It's very simple to replace a hinge on a window but it's much simpler if you have someone to help you hold the frame.

Make sure that the uPVC hinges open and close in the correct direction. Check for the arrows on each hinge to determine which direction the window should be opened.

The problem with the hinges on windows could be caused by improperly opening the window a certain way or due to poor installation at the factory. This can often be resolved by sending us a picture through our website and we will be more than happy to give you advice.

Regular lubrication of the hinges is also necessary. Applying a light engineering lubricant to the hinges is a good way to do this. We recommend using an oil that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regularly lubrication will help the window operate and close more smoothly. It can also prevent corrosion and reduce the risk of sticking. This is recommended to be done at least every year. WD40 and other solvent-based fluids are not recommended since they will damage parts of your uPVC window.

5. Draughts

Draughts in windows made of upvc can be caused by a few different factors. The hinges may also become disaligned as a result of wear, creating gaps between the frame and sash. If they are damaged beyond repair, it might be necessary to have them realigned. In addition, the interlock could also become unbalanced. This happens on the hinge side and might require to be cleaned. In certain instances it is possible to replace the hinges.

The second most frequent reason for draughts is window seals. They are prone to wear or upvc window Repair damaged over time and let air escape through these gaps. This can be prevented by replacing them with high-quality weatherstripping. Replace the upvc window repair windows with low-emissivity glasses. This will help regulate indoor temperatures and decrease draughts.

The last way to reduce drafts effectively is to use a draught-excluder. These are usually made of fabric tubes filled with a filler, which can be hung over your window sill. They will keep your home warm by blocking out cold air.

Your windows made of upvc will continue to provide excellent insulation and security in your home with regular maintenance and repairs. It is essential to remember that all windows will eventually wear out and it could be cheaper to replace them instead of fixing them. So, if you're having issues with your upvc windows, it's recommended to seek help from a professional as soon as you can.