• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is an excellent option for modern homes. They are easy to maintain, durable and long-lasting. In contrast to aluminium and timber, they are not susceptible to rust or rot.

It is important to clean and oil UPVC windows and doors on a regular basis. This will save you from costly repairs and improve energy efficiency.

1. Broken Glass

The damaged glass in your windows can cause significant damage to your home, and could even be fatal. It is essential to take the time to make sure that you're doing all you can to ensure that your windows are in good condition.

For single pane windows it is fairly easy to replace windows, and the new one is usually able to fit into the old frame very easily. If windows with double glazing windows repair panes are joined by internal beading, it will be difficult to remove and Repairs to uPVC Windows replace the panes that were previously in use. In this situation it is essential to buy plastic spacers to aid in fitting the new pane into the window frame.

If you are going to attempt to remove the glass panes yourself, it is essential to wear the appropriate safety equipment such as gloves that are thick and protective eyewear. It is also recommended to lay down a dropcloth before you start working on the glass to ensure that any shards fall onto the cloth instead of onto the floor where they can be trodden under and cause further damage.

After the glass has been removed, it's a good idea to seal the gap with some clear packaging tape or duct tape to stop water and drafts from entering the home until a professional is able to come out and repair the window. This will also provide a barrier to prevent any intruders from making their way into your home. If the gap is particularly large, you might want to consider using an alarm door that comes with an integrated window, as this will offer the best of both worlds.

2. Sagging

uPVC windows and doors are a cost-effective energy-efficient, durable and long-lasting alternative to timber windows with sash. Over time, they can develop a number of problems such as sliding. A sagging window can cause problems with light, draughts, and even security. If you notice that your uPVC window is beginning to shrink, it's crucial to act fast to stop the issue from worsening.

To fix a window that is sagging you can try repositioning the hinges. To do this, you'll need open the window so that you can get to the frame. Then, remove both the top and bottom hinges using a screwdriver, and then adjust them counter-clockwise or clockwise. Once you've adjusted the hinges, close your window and test it for fit. If you're happy with the fit, you can tighten the screws to ensure that they stay in place.

If you are unable to reposition the hinges, you may need to replace the seal. Rubber seals may dry out and lose their elasticity over time, leading them to lose their tightness. If this happens, it's essential to replace the seal as soon as possible so that your uPVC windows are waterproof and secure from draughts.

uPVC handles can also become loose. Most often it is due to screws that have come loose over time. However, it can occur because the handle mechanism has been worn out. It's relatively simple to fix a loose uPVC hand. First, you'll need close the window and then perform an initial test fit. The corners of the sash must align with the casing joint. If it isn't, you can use the screwdriver to loosen up the handle. Then, you can turn the mechanism into position.

3. Water Leaks

It is important to act if you get up each morning to discover mouldy walls and wet floors. Water leaks from windows not only lead to the degrading of the structure of your home but also hamper your efforts to control the temperature inside your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.

This is an easy fix that can be completed by anyone who is a DIYer with the skills. Depending on the severity of the issue the caulking that was used up may require removal before a new layer can be put on. When it is time to uPVC repair, it is important to avoid 'over-caulking'. This will only make your window harder to clean and decrease its energy efficiency.

It is important to check that any drainage holes are free of debris and that the sill pan is angled in a way that allows it to drain away from the window. In more extreme cases, you may need to replace the window.

Mold spots and rotten sills are other signs of water leakage. This fungus thrives under damp conditions and can spread quickly throughout the home.

It is also important to remember that if the leakage originates from the glass of your double-glazed windows it may be more likely to be an issue with the glass seal, rather than the frame or sliding. This can be easily repaired by a uPVC window expert who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be the reason if your uPVC window is difficult to open or it opens with a breeze. Any competent DIYer can replace these in a matter of minutes.

Nearly every home in the UK will have either top hung or side hung uPVC windows that use hinges and, like all mechanical parts, they can wear down over time. Changing a window hinge is essentially a simple process but it can be easier to do with someone else to help hold the frame up.

Verify that the uPVC hinges open and close in the correct direction. Look for the arrows that are on each hinge to determine which direction the window should be opened.

The issue could be caused by opening the window improperly or due to a poor installation in the factory. Sending us a picture via our website is often enough to solve the issue. We are happy to provide advice.

It is also important to lubricate the hinges regularly. This can be accomplished by applying a light engineering oil to the hinges. We recommend using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It also helps prevent corrosion and reduce the risk of sticking. This is recommended to be done at least once a year. WD40 and other solvent based fluids are not recommended since they can damage the parts of your uPVC window.

5. Draughts

Draughts in windows made of upvc can be caused by a few different things. The hinges can also be misaligned due to wear, causing a gap where the sash meets frame. If they are damaged beyond repair, it may be required to realign them. In addition, the interlock could be disaligned. This happens on the hinge side and could require to be cleaned. In certain instances it is possible to replace these.

The next most common reason for draughts are the window seals, these are prone to wear or damaged over time, and will allow air to escape through these gaps. Installing high-quality weatherstripping can help keep draughts at bay. Another alternative is to replace the upvc window with low-emissivity glass. which will help regulate indoor temperatures and again will lessen draughts.

Lastly, one of the most effective methods to reduce drafts is to use a draught excluder. These are typically fabric tubes filled with some sort of filler and can be placed on the top of your windowsill. They will keep your home warm by blocking cold air.