• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Window Sash Repairs

Window sashes must be inspected regularly for signs of mold, mildew and damage. By catching these problems early you can save money on repairs to upvc windows in the future.

The sash is an internal frame that can move upwards and downwards in windows that open. This article will teach you how to make several simple repairs to sash.

Weather Stripping

Wood window sashes add an elegant look to your home. If properly maintained, they will last for many years. However, they may become damaged or degraded in time because of exposure to the elements and normal wear and tear. However, sash repair experts can restore your windows back to their original condition and maintain their appearance for longer than replacement windows.

The first step to repair sash window damage is to fix weather stripping. It's found on both the sash as well as the frame. It could cause drafts if damaged or is loose. To fix it, begin by determining your window's brand and glass manufacturer date (etched in the corner of the glass or on the aluminum spacer between panes). Remove the sash and mark its size and width so that you can get replacement weather stripping that matches.

Then, take it off and place it on a work surface to allow access to all four sides. If the sash is double-hung, remove the weights using their ropes that should fall into the pocket inside the jamb lining. Once you've taken the sash off, use a utility knife to remove the weather stripping from the corners. Then, remove it manually or using a putty knife.

After the sash is cleared, you can install parting stops. These are long pieces that divide the sashes. Pam prefers to use standard 1/2-inch by 3/4-inch window trim from the lumberyard. However, you could also substitute with a scrap piece of wood.

After removing the stoppers for parting and cutting them to the desired length and thickness, apply a thin layer of glazing compound to the bottom of the sash. Smooth the compound with your putty tool, and let it dry at least one day. After it has fully dried and dried, apply a second coat of acrylic latex paint. This will protect the putty and give your sash a new look.

Sash Hardware

The hardware that holds the window sashes may wear out over time and use. This can result in a door or a window that is difficult to open or close. The good news is that fixing and replacing this hardware is usually relatively easy and affordable. If a sash becomes difficult to operate, try spraying some grease into the jamb channel, and then slide it open to see if that solves the issue. If the issue persists it's most likely the sash balance. It is necessary remove the window sash to get access to this part of the hardware.

window repair. sashes should open and close with little effort. However, this can be a challenge if the weights have been worn out or the sash-to rail meeting rail is not properly coated. This problem can be due to various reasons, including an absence of maintenance or a mismatched weight rating.

If the hinge arms of a window begin to sag, this can cause the sash to slide and eventually strike the frame in the corner opposite the hinge arm (Photo 1). To fix this issue, first make sure the sash is squarely inserted into the opening of the frame and then remove it from the window. If the sash has been screwed onto the hinge arm, remove the hinge and replace it. (Photo 2). Then, you can install the new sash (Photo 3).

Due to hinges that are sagging, and a general lack in energy efficiency, old windows especially in older houses, could be difficult to open and close. In many cases, a few simple fixes can allow these windows to operate smoothly again and save homeowners money on energy costs.

To make these repairs to the sash it is essential to have all the tools needed before you begin. Mark the hinge channel location on the frame (Photo 1) with a pencil. This will help you get the channel back into place correctly when you're finished. Take the sash off and take out all the hardware including the parting beads cords, chains, and cords that hold the sash in place. Soften any hardened putty using the help of a heat gun set at medium and equipped with an shield for the nozzle. Remove the old sash and put it in a bag that is labeled.

Sash Weights

Sash weights can be changed to improve the operation of your window sash, and also reduce energy costs. Sash weights are heavy, lead or iron cylinders that are enclosed inside a hidden compartment and attached to the movable sash by rope. These weights provide counterbalance that allows the window to be opened and closed without the use of electrical or mechanical devices. The sash weights are usually disregarded or disabled by homeowners, and are turned into scrap when they break; therefore, you may need to find replacements.

It's difficult to retrieve a sash-weight that has fallen from the cavity, so you'll need to find one that fits correctly. You will also require an additional piece of string, a length the sash cord, as well as some sash pulleys to connect the new sash weights to the sash cord.

Mortise and Tenon joints are used to join older wood windows. The wood pegs holding the components together can be removed by a pin punch and hammer. The majority of these pegs are large on one side and smaller on the other. It is essential to remove first the smaller diameter sides. Later sashes utilized glue instead of pins. They can be cut by using a knife and mallet.

After the sash is released, you can remove sash stops and access the weight pockets. This is usually done through tiny holes in the bottom of each jamb. The hole is surrounded by a wooden panel that can be removed to reveal the inside workings.

Once you have the sash stopped and the access panel removed, you will be able to remove the old sash weight and replace it with new. Make sure you weigh the sash before you do this, as the old weights may be different sizes than what you require. After the new weight is installed, you can thread the string through the sash pulling mechanism. Then, nail the string to your boxed frame. Leave a few inches of space at the top of the string for future adjustments.

Sash Cords

Most old double-hung windows include a chain or cord attached to the weights that supports and keeps the sashes balanced in the jamb. As time passes, these cords can become damaged and render it impossible to raise windows. A new sash cable will restore the ability to raise and lower the sash and keep it in position when it is opened.

To replace sash cords, the first step is to remove the access panels from the jambs. These are usually screwed or nailed in and must be removed. It is possible to remove them using an axe or hammer, but it is always better to lay out dust sheets prior to starting any work.

Once the access panel is removed, Window Sash Repairs you can begin working on the sash. Use a flat bar or chisel to pry the small parting beads from their grooves. It's important to be patient because they are usually wedged or nailed in place. If the sash remains in place, remove the mortise and the tenon joints by using the help of a hammer and pin or screwdriver, and then take out the wood pegs attached to each component. The sash should move freely now, but it may require some lubrication to make it feel less stiff.

With the sash open With the sash in an open position, measure the sash chain or cord to extend from the pulley in the top of the jamb to the sash slot on the bottom. Cut the chain or cord and attach it in Step 6 above. You can use a hammer, nails, or screws. However, nails are less likely than screws to cause damage.

If you don't have an item that replaces the old counterbalance system, it is recommended to keep the original balancing weights in place. It's not too expensive to purchase these from salvage shops for architectural purposes and they'll be simple to install once you have the sash unlocked. Depending on the dimensions and shape of your window you may need to use one or two sashweights in order to keep the sash open.