• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Repair a Broken Window

Whether from a bad storm or a ball kicked by your neighbors' children, broken window glass is not something to be ignored. It can lead to further issues like water seepage or a draft that can increase your energy bills.

There are a variety of ways to repair the crack, based on the size. Here are some options to consider:

Tape

A good old-fashioned piece of tape is a great temporary solution to cracks in windows. It's simple to use, inexpensive and effective. Make sure you cover both sides of the crack so that it is as secure as possible. This will decrease the amount of air that could get into the window, which could cause further damage to the glass, or cause it to shatter. Clear tape is a good alternative since it looks nicer than duct tape and won't leave a sticky residue when you remove it.

There is also a special adhesive tape specifically designed for the repair of damaged window screens and it can be purchased at most hardware stores. It is available in 2 lengths of 30' x 2' and forms an invisible patch that stops the crack or tear from spreading further. This can be useful for boat enclosure windows, RV or tent vinyl windows and even car windows with soft tops. It is easy to apply and requires no special tools or knowledge. Simply cut the proper size, remove the release paper, then apply it. It is also UV and salt water resistant and is made of an extremely durable material that can withstand harsh conditions. This will save you a lot of money by not needing to buy a complete window replacement.

Super Glue

Super glue can be used to repair small cracks or chips in glass. These adhesives bond to hydroxyl ions on the glass surface, creating a strong hold in seconds. Cyanoacrylate glues are also good for gluing metal, wood and ceramic to glass since they are able to withstand moisture and high temperatures. If you have a huge project to finish, however you may think about using epoxy or silicone glues to ensure a stronger hold and faster drying.

Before applying any kind of glue to a broken window it is essential to prepare the surface. You will want to remove any debris and ensure that the surfaces are dry and clean. It's also an excellent idea to roughen the surface particularly if it's extremely smooth. A light sanding gives the adhesive a larger surface area to stick to, which will result in an even stronger bond.

When you're ready to begin the actual repairs, you need to use a quality product that has been specifically designed for glass. This will ensure that the glue is safe and won't leave any unattractive marks or fingerprints. Choose clear glue that is transparent once it's dried. Avoid glues that expand once they dry, since this can cause cracks in glass.

You'll also need to consider how the glass will be used. Super glue is suitable when the glass is kept inside and will not be under much stress. If the glass will be part of the windscreen, it's an ideal idea to apply a weatherproof glue.

Super glues are able to cure in a variety of times. It is important to read the instructions carefully since some require accelerators made of chemicals in order to accelerate the drying process. It's recommended to work in a well-ventilated space and open all windows to increase air circulation, since this will help the glue to dry more quickly. In addition you can utilize a fan to boost air flow around the work area, which will help it to dry even more quickly.

Glass Repair Film

Glass repair film is an efficient and practical way to make windows that have cracked safe until they can be repaired professionally or replaced. Anyone can install it, even if they are not a skilled tradesman. It is easy to install and fast. It is less expensive than a traditional window board and can keep the elements out and keep heat in. It has the look of a glass window and is ideal for hospitals, schools and offices.

The sharp shards left by a damaged window could cause serious injury and even death. Safety window films are made with a strong adhesive to make broken glass less risky. They also keep the shards inside the film. The film is translucent, so light can still pass through the upvc window repair and it's much more attractive than a boarding-up - particularly in businesses that rely on their customers coming to their premises.

The film can be cut to size with knives or scissors. It is provided with an easily peelable liner on the reverse that has a printed grid that can be used to cut to size. It can be placed on either side of the window and if there is an uneven surface it can be overlapped by 10cm for additional security.

There are several different types of safety film available in accordance with the nature and severity of the damage. Amber safety films are recommended for bullseyes and other breakages that have many small cracks. Gray safety films are recommended for star break. Films should be placed on clean, wet glass. It is recommended to use a polyethylene squeegee and a soap solution. After the film has been glued to the window, it should be left to cure for several days.

This tough, self-adhesive film is clear and is designed to make damaged and broken glazing secure, assisting in stabilizing the glass integrity and weatherproof it until the permanent repair can be created. It is used in a number of industries and is manufactured by Eastman Films, who have years of experience manufacturing special safety and security window films all over the globe. The film is available in 15 metre long x 914mm wide rolls. It comes complete with a backing sheet and release liner.

Paint

It is crucial to paint your windows thoroughly. This will help the new coat of paint look attractive and also let it adhere properly. Before starting, make sure that the window is clean and scraped to remove any bits of paint or wood that are loose or decayed. It is also essential to take out any hardware, such as handles and latches. Then, you'll want to sand the area that is going to be painted. This will create a smooth surface that the primer and paint will join.

It is important to protect the surrounding areas of the window by covering them with plastic and painters tape. This will prevent paint from getting onto areas that are not supposed to be painted. Green frog tape is ideal to do this since it forms a neat line that is easy to remove. It is also a good idea to apply painters tape to any edges that are delicate that adjoin the wall surfaces.

After the window has been secured and securing, you can begin painting. It is necessary to apply several coats of primer, glazing and allow each one to dry before moving on. After you've finished priming, it is an excellent idea to give the entire surface an easy sanding using fine-grit and sandpaper. This will help in making the surface smooth for the next coat of paint and will also help in removing any dust that has collected.

If you are using oil or acrylic based paints and primers, then you'll need to wait for them to completely dry before you begin painting. This could take as long as one day, based on the brand you're using.

When the primer and paint are dry, it's now time to paint. It is best to work from the inside out painting rails (horizontals) before stiles (verticals). This will help stop drips from accumulating on the glass. Also, be sure to keep a moist cloth handy to wipe off any drips of paint as soon they happen.