• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Replacement UPVC Door Handles

Find the perfect handle for your door, whether you are replacing your existing handles or adding additional security. These handles made of upvc are easy to install and have the minimum 92mm central distance for multipoint locks.

The backplate fixing centre and the lever/keyhole dimensions are the most important measurements. Compare these measurements to your current marks before placing an order.

Lever/Pad

Lever pad handles are made up of a lever on one side, and a paddle-shaped handle on the opposite. They are designed to work with key wind locks although they can also be adapted to split spindle multipoint door locks (though you'll need an additional dual spindle lock case).

Once you have chosen the right handle for your doors the finishes will be listed in the drop-down menu. Not all styles of handle are available in every finish and it is recommended to check the technical drawings and sizes sections for the specific product you're looking for to ensure that you are getting the correct size and fit.

When choosing a new set of lever pad door handle replacement handles made of Upvc it is important to ensure that they correspond to the PZ (distance between the spindle of the handle and the centre of the cylinder hole) of your current multipoint door locks, as they need to be in line to ensure that the doors remain locked, either from the inside or the outside. Our handles are designed to fit most standard cylinders, but it is important to double-check before ordering.

If you wish to upgrade to dual spindle levers you will need to remove the existing handles and disassemble the lock case. This will require an additional split inline cylinder. They can be purchased separately and we have the complete technical diagram that you can examine in the images for each product.

It is a good idea to loosen the screws that are holding your door handle, and then check the mechanism. You may have to loosen the screws further when they aren't tight, and then you can take off the old spindle and handle and install your new door handle made of upvc. Before putting the handle in place it is a good idea to check that it is in the correct place. You can do this by placing your finger into the space between the door frame and the handle to ensure that it is in a level position.

Lever/Lever

The lever uvpc window Handles for doors are used to operate a multi-point lock with an Euro cylinder. They can be found on many upvc replacement window handles double doors, as well as on some wooden and aluminum doors. They are equipped with a lever inside and an outside paddle and are typically available in two different types. Sprung - They have a spring cassette installed within the backplate that helps bring the handle lever into a horizontal position. Non-sprung: These do not have a mechanism to spring the handle lever into a horizontal position.

To fix a door handle lever that is sagging you'll need to locate the hole or pin that is the detent access point. This is usually an insignificant hole or protruding ring, or rectangle, located on the handle base plate. Once located you can loosen the set screw using a screwdriver and remove it to release the lever to return to the horizontal position.

When the handle is in a horizontal position you can re-install the screws and tighten them to make sure the handle is secured to the base plate. Consider applying a threadlocking product to the threads of screws to improve grip and prevent them from loosening over time.

There are a variety of reasons why door handles of levers slide. The most common reason is that the fixings are over tightened and are putting strain on the bearings of the lever, causing it to bind against the door's surface. It could also be that the levers aren't operated in a straight line and this is compressing the latch mechanism preventing it from fully springing back into action.

A common cause of a spring lever not operating properly is that the spring is not being in the proper position on the backplate. To determine whether the handle is back to horizontal, simply operate it.

If the door handles aren't tight, it is essential to spot the issue fast, as it could cause excessive wear on the screws, and even to the handle falling off of the base plate. It is recommended to tighten all loose screws on a regular basis, as this will help to prevent them from loosening.

Lever/Snib

These upvc handles are also called "Snib handle sets" and come with a snib lock button at the top of the door lever. If you do not have a dummy locking device then you can use this to secure the door. They are typically fitted with a Fullex 68PZ (that's 68mm between the spindle's centre and the lever or lock centre) door lock. We also have a selection of 68PZ door handle from brands like Ferco and Fab & Fix.

You can upgrade your home by changing your door handles whether you are replacing the handles on your existing ones or installing new ones on doors that you've constructed. There are a variety of styles of upvc door handle available that include traditional levers on backplate, curved or straight short latches, and dummy knob handles for multi point locks that are perfect for French doors.

Rose door handles and hinges are oval or circular versions of lever on backplate handles. These types of door handles are equipped with an a knob or lever on a backplate which is placed behind the lever or knob and is often referred to as a rosette. However, certain back plates can be detached to allow for concealed fixing.

There is a variety of coloured and chrome finishes available for these handles to match your door and other hardware, including hinges, knobs and bolts. Some handles come with an grub screw that can be used to connect the knob or lever securely to the spindle. Some handles come with bathroom spindles that can be used for bathroom locks. They also come with a thumbturn release mechanism, and can be used on doors for bathrooms.

Mortise

If your front door's uPVC handle is stuck in the open position, the cause is most likely to be related to the tubular latch. There are a few reasons for this, the first being an unlubricated latch plate on the latch plate. This can be resolved easily by simply opening the door and spraying lubricant onto the handle and lock. It could also be that the latch has slipped away from the backplate. This could be more problematic and will require a specialist to repair.

A multipoint door handle system is the ideal solution to solve the issue of a sticking door handle. These handles mount through the door's faceplate and are operated with an actuated thumb turn knob or key that triggers a cam that locks the deadbolt. The handles are available in a number of different sizes to fit various types of uPVC doors. They are also available in a variety of attractive finishes that match the hardware you already have. The handles are available via the internet or at the local locksmith. They are simple to install and come with clear instructions.

You'll need to know the PZ cylinder's size to choose the correct replacement handle set. This is the measurement in millimetres that lies between the outer edge of the door frame and the centre of the hole for the handle. You'll also need the type of lock on your door, irrespective of whether it is a mortise or hook lock. The most effective way to locate the correct handle once you have the measurements is to use the filter for brands on the website. This will help you narrow down your options, and then you'll be able to select the correct size.

A typical handle set includes an arm with two screws of various lengths, drill guides, and instructions for installation. The smart models, like the Igloohome Smart Mortise 2+ includes an entire mortice lock that has built-in keypad. These are more complex models that are best suited to professional installers or highly competent DIYers. Some handle sets include an array of other accessories, like weather strips, which can be used to enhance the look of the door.