• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Double Glazing Windows Repairs

Double glazing consists of two panes in a frame or opening in a wall. The window glass can become faulty at times and require repairs.

If you've noticed condensation between the windows or noticed a distinct draught or hinges or handles are becoming difficult to open, these are all signs that your double-glazed unit needs to be repaired. The repair typically involves a reseal of the entire unit.

Broken Panes

Double glazed windows are made up of two glass panes that have an air gap in between that is filled with inert gases like Krypton or argon. This helps keep the heat inside your home and prevent cold drafts and Window doctor moisture from entering. Sometimes the windows may be damaged and the whole window may require replacement. It is crucial to call the company that sold you double glazing immediately when you notice cracks or chips in the window.

A few simple steps can be taken to fix a damaged window, however it is not recommended you attempt repairs on your own unless you're a skilled DIYer. Put on gloves first and carefully remove the broken window pane. If the pane is cracked, apply masking tape in a crisscrossing design to the cracked areas. This will stop cracks from getting worse over time, particularly in the winter. It is also recommended to cover your work surface in newspapers to stop any broken pieces from falling. After the broken pane has been removed, scrape away any glazing putty or window seal using the help of a knife. Remove the glazing points with pliers. Finally, coat the bare wood with an easy-drying primer.

If you are able to buy a new replacement pane take measurements of the length and width of the channel using a tape measure. Subtract 1/8" from both measurements to take into account the slight movement of the replacement pane. Then, slide the replacement pane in place and then roll thin pieces of glazing compound in the channels with grooves. Tap the glass gently with the hammer every 6" or 8" to aid in setting it in place. Be careful not to break it.

It is a good idea to take advantage of your double glazing warranty to save the cost of a complete replacement window. In general, the warranty will cover both the cost of the replacement parts and labor. It is important to verify the warranty details as they will vary from one company to the next.

Foggy Glass

Condensation in the panes of your double glazing can cause foggy glass. This could be caused by various reasons including variations in temperature, poorly installed frames, or the deteriorating seals.

In the majority of cases, double glazing contractors can fix this issue quickly and easily. You should contact the company who installed your windows immediately if you notice any problems. Follow up with a written response. This will make it easier in the event that you have to contact them again in the future. It can also prove very helpful when the issue is covered under your warranty or guarantee.

It is possible to resolve the problem by replacing the gasket seals. This will not require you to replace the entire window unit, and will make your home more energy efficient. To accomplish this the window glazier needs to remove any retaining clips or strips that hold the IGU in place and cut through the sealant using the aid of a saw.

Then they will build or buy an IGU replacement to fit the frame, and use specific sealants in order to ensure it's airand water tight. Once they're finished installing the clips, they'll either reinstall them or strip and apply more sealant.

If you're lucky the misting will cease. However, it's important to ensure that your frames are properly ventilated to ensure that moisture doesn't build up in your walls and ceilings.

Another frequent issue reported by double glazing owners is that their doors or windows become difficult to open and close - this can be due to extreme weather, or it could be that the frame has sunk or sagged a bit over time, and isn't in line with the rest of your house. If this is the case, try wiping the frames with cold water to bring the frames a bit, but it's unlikely that this will solve the issue completely. If you still can't solve the issue, you may require the help of an expert to replace them.

Condensation

Condensation happens when the insulating gases in double-glazed windows fail to hold their position leaving air and moisture between the panes. This is more common in winter, when humidity levels tend to be higher. However it can also occur at other times. Moisture can cause mould and mildew to form around window frames, sealants, and sills. This isn't just unattractive, but it's also dangerous for your health. A window professional can often seal condensation to lessen moisture and prevent moisture from building up within your home.

Window sealing, or window gaskets are a crucial part of any double glazing window or door. These gaskets help to seal in the insulated air between your window glass and block drafts, heat, and moisture from escaping or entering your home. These gaskets can perish or shrink in time due to weather, temperature conditions and ageing, meaning that condensation could be forming on your double-glazed windows or doors.

This can be fixed however, it will require replacement of the "sandwich" (thermo-pane & glass) inside your double-glazing window. Unless you have the right tools it is recommended that you hire a professional to re-seal your double-glazed windows.

Another issue that is common is the mist that occurs between double-glazed windows. This is difficult to resolve. This indicates that the vacuum seal applied by the factory has failed, and there's no way to let dry air into or out of the window sandwich.

Professionals will reseal your window Doctor (fpcom.Co.kr) by using the same method they use to resolve problems with condensation or fog. This usually involves removing a sandwich and spraying the cleaning agent on it, and then sucking the old sealing agent. It is crucial to measure the sandwich in terms of width, length and thickening. This will ensure that the replacement will fit perfectly and the new seal is drawn.

This can be a challenging task that requires specialized tools that aren't commonly found in DIY stores. It's normally best left to professionals because faulty seals can lead to damp and mold in your home which could be expensive and dangerous to your health.

Water Leaks

If you see water leaks around your double-glazed windows it's important to respond quickly. The smallest leak can become a major issue if not addressed quickly.

The window frame could be the cause. Make sure that the sill pan (the part that is flat at the bottom of the window frame) is pitched to allow water to drain away from your home, and not into the frame itself. If you notice that the sill pan isn't set correctly or you see water inside the wood, you should call a double-glazing repair service.

Another reason for water leaks is a damaged window seal. This could be due to age, damage or weather. This isn't an easy thing to fix, and is generally best left to the professionals.

This can result in lower energy efficiency. This lets cold air in your home in the winter and hot gas to escape in summer. This could result in higher cost of cooling and heating.

It is a simple fix by applying a fresh layer of caulking. While those with DIY skills can do this themselves however, it is more efficient to have a double glazing repair glazing specialist handle the job. You will have peace of mind and you can be sure that the job has been done correctly.

Double-glazing windows are available with warranties up to 20 years. It is a good idea to check with the company you bought your windows from and determine what they offer and how long. You can save the cost of having to replace double-glazed windows later on. If you have an insurance policy on your double-glazed windows, it is crucial to register any issues as soon as you can. This can be done online or by calling the company directly. Having all of this information in writing will be helpful if you ever require your warranty.