• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is a fantastic choice for modern homes. They are durable, long-lasting and easy to maintain. They are not susceptible to rot or rust like aluminum and timber.

It is crucial to wash and oil UPVC windows and doors regularly. This will help prevent costly repairs and increase energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it could cause a large deal of damage to your home, which can make it very hazardous and possibly fatal. It is crucial to take the time to make sure that you're doing everything you can to ensure that your windows are in good repair.

Single-pane windows are relatively easy to replace and Window Doctor typically fit into frames of the past easily. If windows with double panes are held together by internal beading, it is more difficult to remove and replace the panes that were previously in use. In this situation it is essential to buy plastic spacers to make sure that the new pane fits into the Window doctor frame.

Wearing eye protection and thick gloves is essential if you plan to remove the glass by yourself. You should also lay down a dropcloth before you begin working on the window panes, so that any shards of glass fall onto the fabric and not onto the floor which could cause them to be trampled.

It's a good idea to seal the gap after the glass has been removed. This will prevent drafts and water from getting into your property until a professional is able to repair the window. This also serves as an obstruction to prevent intruders from making their way into your home. If the gap is large, you may think about an alarm door that comes with an integrated window, as this will offer the best of both worlds.

2. Sagging

uPVC windows and doors are an affordable, durable and energy-efficient alternative to timber sash windows. However, over time they are susceptible to a range of issues like sagging. A sagging uPVC windows can cause problems with light, draughts, and even security. If you find that your uPVC window is beginning to shrink, it is important to act swiftly to prevent the problem from worsening.

To repair a window that is sagging, you can try repositioning the hinges. First, you'll need to open the windows so you can access the frame. After that, using an screwdriver, unscrew the hinges at the top and bottom and adjust them by turning them clockwise or anti-clockwise. Once you've repositioned the hinges, close your window and test it for fitting. If you're satisfied with the fit, you can tighten the screws until they remain in position.

If you cannot reposition the hinges, you could have to replace the seal. Rubber seals may dry out and lose their elasticity over time, which causes them to loosen. It is crucial to replace your seal as soon as you can to keep your uPVC window watertight and draughtproof.

uPVC handles may also become loose. Most often this is due to screws that have become loose over time. However, it can also happen because the handle mechanism has worn out. It's relatively simple to fix a loose uPVC handle. You'll first need to close the window and then perform an initial fitting. The corner joints of the sash should align with the casing joint. If it does not then you can use the screwdriver to loosen up the handle. Then turn the mechanism to position.

3. Water Leaks

If you wake up to wet floors and damp walls each time it rains it's important to take action. Water leaks through windows can cause structural damage to your home, and impact your ability to regulate the temperature in your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.

This is a simple fix that can be done by any DIYer who has the ability. Depending on the severity of the issue the caulking used previously might need to be removed before a new layer is applied. When it comes to uPVC repair, it is important to avoid over-caulking. This can make your window more difficult to clean and reduce its energy efficiency.

Make sure that the drainage holes are free of debris in them, and also ensure that the sill pan has been angled correctly to drain away from the window. In more serious situations, you might need to consider replacing the window.

Other indicators of water leakage include decayed sills and the appearance of black spots of mold on the wall near the window. This fungus thrives in damp conditions and can quickly spread throughout the house.

If the leakage is occurring between the double glazing-glazed glass, it is more likely that the issue is with the seal than the frame. A uPVC specialist can easily fix this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or are loose and open in a breeze it could be hinges at fault. Any competent DIYer can replace these in a matter of minutes.

Like any mechanical part, hinges can be damaged over time. It's easy to change a window hinge, but it's easier if someone else helps hold the frame.

Check that the uPVC hinges are closed and open in the right direction. This can be done by looking for the arrow on each hinge. This indicates the direction in which the window should be opened.

The issue can be caused either by opening the window incorrectly or a faulty installation in the factory. This can often be resolved by sending us a picture through our website and we will be more than happy to give you suggestions.

It is also essential to lubricate the hinges on a regular basis. Applying an engineering lubricant that is light to the hinges is a good way to do this. We recommend using the lubricant that doesn't contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can help the window to operate and close more smoothly. It can also reduce the risk of a window getting stuck and stop corrosion. This is recommended to be done at least once a year. WD40 and other solvent-based fluids are not recommended since they could damage parts of your uPVC window.

5. Draughts

Draughts in Upvc windows can be caused by a few different things. The hinges can also be unbalanced due to wear, creating gaps where the sash meets frame. If they're beyond repair, it may be required to realign them. The second is the interlock, which is located on the hinge of the window, can be misaligned. Again, it may be feasible to give them a thorough clean, however in some instances it could be necessary to have these replaced.

The seals may wear out or become damaged over time, allowing air to escape. This can be prevented by replacing them with high-quality weatherstripping. Another alternative is to replace the window with low-emissivity glass. which will help regulate indoor temperatures and will reduce the possibility of draughts.

The final method to cut down on the amount of draughts is to use a Draught-exclusion device. These are usually made of fabric tubes filled with a filler, which can be put on top of your window sill. They can keep your home warm by blocking cold air.

With a bit of regular maintenance and repair windows made of upvc will provide a great level of security and insulation for your home. However, it is important to recognize that windows last for a certain period of time and they may reach a point where it is more economical to replace them than fix them. So, if you are experiencing issues with your Upvc windows, it is always recommended to seek help from a professional as soon as possible.