• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is a fantastic option for modern homes. They are easy to maintain, durable and long-lasting. They are not susceptible to get rotten or rusty like timber and aluminum.

It is crucial to wash and oil UPVC doors and windows on a regular basis. This will prevent unnecessary repair costs and increase energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it could cause a large amount of damage to your home, which can make it very hazardous and possibly fatal. It is essential to make sure that your windows are in good working order.

Single-pane windows are relatively simple to replace and generally fit into old frames very easily. If windows with double glazing repair panes are joined by internal beading, it is more difficult to remove and replace the old panes. In this case, it is necessary to purchase plastic spacers to help the new pane fit into the window frame.

Wearing eye protection and thick gloves is essential when you are planning to remove the glass yourself. It is also a good idea to lay down a dropcloth before you begin working on the glass to ensure that any shards fall on the fabric instead of onto the floor where they could be trodden under and cause further damage.

Once the glass is removed from the window, it's best to cover the gap with packaging tape or duct tape to stop water and drafts from getting into the property until a professional is able to come out and repair the window. This will also act as a barrier, preventing any intruders from gaining entry to your home. If the distance between the window and the door is substantial, you may prefer security screens that has an opening. This will give you the best of both.

2. Sagging

uPVC is a durable, energy-efficient and affordable alternative to timber sash window. In time, they could develop a number of problems that include sagging. A sagging uPVC windows can cause problems with light, draughts and even security. It's important to take action when you discover that your uPVC windows are sliding.

Repositioning the hinges can aid in fixing a window which is sliding. First, you'll need to unblock the windows so you can get at the frame. Then, using an screwdriver, remove the hinges at the top and bottom and adjust them by turning them clockwise or counter-clockwise. Close your window to check the fit after you've repositioned your hinges. If you're satisfied with the size of the window, UPVC Window Repairs tighten the screws to keep them in the right position.

If you cannot reposition the hinges, you may have to replace the seal. Over time rubber seals can lose their elasticity and become dry and cause them to lose tightness. If this happens, it's crucial to replace the seal as soon as possible so that your uPVC windows are waterproof and safe from drafts.

uPVC handles can also loosen up. Often this is due to screws that have come loose over time. However, it could also happen because the handle mechanism has worn out. Luckily, it's not difficult to repair the handle of a window that is loose yourself. First, you'll need to close the window and perform an initial test to ensure that it fits. The joint at the corners of the sash should be aligned with the joint on the casing. If it isn't, you can make use of a screwdriver to loosen the handle and then turn the mechanism back into its original position.

3. Water Leaks

It is important to take action if you wake up every morning to find a smoky wall and floors that are wet. The leaks of water through windows could cause structural damage to your home and hinder your ability to control the temperature in your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.

This is a simple fix that can be completed by any DIYer who has the ability. Depending on how severe the problem is, the old caulking may have to be removed. It is crucial to keep in mind that when it comes to uPVC window repairs, you should avoid the temptation to "over-caulk' as this will only make the area harder to clean and could reduce the efficiency of your energy.

Check that any drainage holes have no debris in them, and also ensure that the sill pan has been properly angled to drain away from the window. In more extreme situations, you may have to replace the window.

Mold spots and rotted sills are another sign of water leakage. The mold thrives in damp environments and can quickly spread throughout the home.

It is also important to note that if the leak is coming from between the glass of your double glazed windows, it's more likely to be an issue with the glass seal rather than the frame or sliding. Again this can easily be repaired by an uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or slack and blow open in a breeze, it may be hinges that are at fault. They can be easily replaced by any competent DIYer and are usually completed in a matter of minutes.

Almost every household in the UK will have top-hung or side-hung uPVC windows that are hinged and like any mechanical part they can wear down over time. It is an easy procedure, but it is easier if you have someone to assist in holding the frame in place.

It is also important to ensure that the uPVC hinges are opening and closed in the right direction. Look for the arrows on each hinge to determine the direction in which the window should be opened.

The issue can be caused due to opening the window in the wrong way or by a poor installation in the factory. Sending us photos via our website is often enough to resolve the problem. We are happy to provide assistance.

It is also crucial to ensure that the hinges are lubricated on a regular basis. Applying a light engineering lubricant to the hinges is a great method of doing this. We recommend using an oil that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can help the window operate and close more easily. It can also reduce the chance of windows sticking and help prevent corrosion. This should be done at least once a year. WD40 and other solvent based lubricants are not recommended as they can damage the parts of your uPVC window.

5. Draughts

Draughts can be caused by several different things. The hinges may also become misaligned due to wear, which can cause a gap between the frame and sash. If they are damaged beyond repair, it could be necessary to have them realigned. The interlock may also become unbalanced. It is located on the hinge side and might require to be cleaned. In some cases, it may be necessary to replace the hinges.

The second most frequent reason for draughts are the window seals. These are prone to wear or damaged over time, and will allow air to escape through these gaps. Replacing these with high-quality weatherstripping can help stop draughts. Another alternative is to replace the upvc window with low-emissivity glass, this will help in regulating indoor temperatures and again will lessen draughts.

Another method of reducing drafts effectively is to use a draught-excluder. These are typically fabric tubes filled with a filler that can be put on top of your window sill. They can help stop cold air from entering and keep your home warm and cosy!

With a little regular maintenance and repairs windows made of upvc will continue to provide an excellent level of insulation and security for your home. It is important to remember that all windows eventually wear out and it is more cost-effective to replace them than to repair them. If you are experiencing issues with your Upvc windows, it is always recommended to seek assistance from a professional as soon as possible.