• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is a great option for modern homes. They are long-lasting, durable and easy to maintain. As opposed to aluminium and timber they do not get rusty or decay.

It is crucial to wash and oil UPVC doors and windows on a regular basis. This will reduce repair costs as well as improve the efficiency of energy.

1. Broken Glass

The broken glass in your windows can cause significant damage to your home, and could even be fatal. It is important to ensure that your windows are in good shape.

For single pane windows it can be relatively simple to replace them, and the replacement will usually fit inside the frame that was previously installed easily. If you have double-paned windows which are joined by internal beading, it is harder to remove and replace the panes that were previously in use. In this instance it is essential to purchase plastic spacers to help the new pane fit into the window frame.

If you plan to attempt to remove the glass panes yourself it is important to wear the proper safety gear, including thick gloves and eye protection. It is also recommended to lay down a dropcloth before you begin working on the window panes, so that any shards fall on the fabric and not on the floor and could be trampled under.

It's a good idea to tape the gap once the glass has been removed. This will keep drafts and water from entering your home until a professional is able to fix the window. This will also provide an obstacle to stop intruders from making their way into your home. If the gap between the window and the door is substantial, you may need to consider an alarm system that has an opening. This will give you the best of both.

2. Sagging

uPVC windows and doors are a cost-effective energy-efficient, durable and long-lasting alternative to timber windows with sash. As time passes, they may develop a variety of issues that include sliding. A sagging window can cause problems with light, draughts and even security. If you notice that your uPVC window is beginning to sag it's crucial to act fast to stop the issue from worsening.

To fix a window that is sagging you can try repositioning the hinges. First, you'll need to unblock the windows so you can access the frame. Then, remove both the hinges at the top and bottom using a screwdriver and adjust them counter-clockwise or clockwise. Close your window to check the fit after you've moved your hinges. If you're happy with the fit, tighten the screws to ensure that they remain in position.

If you are unable to move the hinges, you may need to replace the seal. Rubber seals can dry out and lose their elasticity with time, which causes them to lose their tightness. If this happens, it's crucial to replace the seal as fast as possible to ensure your uPVC windows remain watertight and draught-proof.

uPVC handles may also loosen. Most often it is due to screws that have become loose over time. However, it could be due to the fact that the handle mechanism has worn out. It's relatively easy to fix a loose uPVC handle. The first step is to close the window and then perform an experiment fit. The corner joints of the sash should be aligned with the casing joint. If it doesn't, you can use the screwdriver to loosen up the handle. Then, turn the mechanism back into place.

3. Water Leaks

If you wake up to damp floors and mouldy walls each time it rains it's important to take action. Leaks of water from windows can cause structural damage to your home, and hinder your ability to control the temperature of your home. The most frequent reason for leaks in uPVC windows is that the sealant surrounding the frame is damaged or missing.

This is a simple fix that can be completed by any DIYer who has the ability. Depending on how severe the problem is, the old caulking may need to be removed. It is important to keep in mind that when it is about uPVC window repairs, you should not be tempted to apply too much caulk in order to make the area harder to clean and can decrease the efficiency of your energy usage.

It is crucial to make sure that the drainage holes are free of debris and that the sill pan is angled correctly so that it drains away from the window. In more serious situations, you may need to think about replacing the window.

Other indicators of water leakage are rotted sills and the appearance of black spots of mold on the walls near the window. This fungus thrives in damp conditions and can spread quickly throughout the home.

It is also important to keep in mind that if the leakage originates from the glass of your double glazed windows, it is more likely to be a problem with the glass seal rather than the frame or sliding. A upvc window repair near me specialist can fix this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or are loose and open with a breeze, it may be hinges at the fault. Anyone with the skills to fix them can replace these in a matter of minutes.

Like any mechanical part hinges are prone to wear out over time. It is essentially a very simple process but it can be easier to do when you have a person to help you hold the frame in place.

It is also important to ensure that the uPVC hinges are opening and closed in the correct direction. You can check this by looking for the arrows on each hinge. This indicates the direction in which the window should be opened.

The problem can be caused either by opening the window incorrectly or by a poor installation in the factory. This can often be resolved by sending us a photo on our website. We will be happy to give you suggestions.

Regularly lubricating hinges is also essential. This can be done by applying an oil that is light in nature to the hinges. We suggest using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication can help the Window Repair operate and close more smoothly. It can also reduce the possibility of a window sticking and help prevent corrosion. This should be done at least once a year. WD40 or other solvent-based lubricants are not recommended as they could damage your uPVC windows.

5. Draughts

Draughts in upvc windows can be caused by different factors. First, the hinges because of wear and tear, can become misaligned, this will cause a gap to form between the sash and the frame. If they are beyond repair, it could be required to realign them. The interlock may also become unbalanced. It is located on the hinge's side and might require to be cleaned. In some instances it is possible to replace them.

These seals are susceptible to wear and tear or become damaged over time, allowing air escape. This can be prevented by replacing them with high-quality weatherstripping. Another option is to replace the window with low-emissivity glass, this will help to regulate indoor temperatures, and also lessen the possibility of draughts.

The last way to reduce the amount of draughts is to use a draught-excluder. These are usually fabric tubes filled with a filler, which can be put on top of your window sill. They can help block out cold air and keep your home warm and cosy!

The windows made of upvc can remain a great source of insulation and security in your home with regular maintenance and repairs. It is important to remember that all windows eventually get worn out and it could be cheaper to replace them rather than repair them. So, if you are experiencing issues with your Upvc windows, it is always recommended to seek help from a professional as soon as you can.