• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are an excellent option for modern homes. They are long-lasting, durable and easy to maintain. In contrast to aluminium and timber, they do not rust or rot.

It is important to clean and oil UPVC windows and doors regularly. This will reduce repair costs as well as improve the efficiency of energy.

1. Broken Glass

The damaged glass in your windows can cause significant damage to your home, and could even be fatal. It is essential to take the time to make sure that you are doing everything you can to ensure that your windows are in good repair.

For single pane windows, it is relatively easy to replace them, and the new window will usually fit inside the old frame very easily. If you have double-paned windows which are held together by internal beading, it is harder to remove and replace the old panes. In this situation you'll need to find some plastic spacers that will assist the new pane to fit perfectly into the window frame.

Wearing protective eyewear and thick gloves is essential when you are planning to remove the glass by yourself. It is also a good idea to lay down a drop cloth prior to when you begin working on the glass, so that any shards will fall onto the fabric instead of onto the floor where they could be trampled on and cause further damage.

It's a great idea to cover the gap with tape after the glass is removed. This will stop water and drafts from entering your property until a professional comes out to fix the window. This will also act as a barrier that will prevent any intruders to gain access to your home. If the gap between the window and the door is significant, you may need to consider security screens that has an opening. This will give you the best of both.

2. Sagging

uPVC is durable energy-efficient, cost-effective and economical alternative to timber sash window. Over time, they can develop a variety of issues such as sagging. A window that is sagging can cause problems with light, draughts, and even security. It's crucial to act when you notice your uPVC windows are sagging.

Repositioning the hinges could aid in fixing a window which is sagging. To do this, you'll need to open the window so that you can get to the frame. After that, using an screwdriver, take off the hinges on the top and bottom and adjust them by turning them clockwise or anti-clockwise. Once you've repositioned the hinges, shut your window and verify the fit. If you are happy with the fit of your window, tighten the screws to secure them in the right position.

If you aren't able to move the hinges, you might need to replace the seal. Over time, rubber seals lose their elasticity and become dry, which causes them to lose tightness. If this happens, it's crucial to replace the seal as fast as you can to ensure that your uPVC windows remain watertight and safe from drafts.

uPVC handles may also become loose. This is typically caused by screws that have loosened over time, but it can be due to the handle mechanism wears out. It's relatively easy to fix a loose uPVC hand. The first step is to close the window and perform an experiment fit. The joints at the corners of the sash should align with the joint on the casing. If it isn't, you can use the screwdriver to loosen up the handle. Then turn the mechanism into position.

3. Water Leaks

If you awake to wet floors and damp walls each time it rains, it's crucial to take action. Water leaks from windows are not just a cause for degradation of your home's structure but also hinder your efforts to control the temperature inside your home. The most frequent reason for leaking uPVC windows is that the sealant around the frame has been damaged or is missing.

This is a simple fix that can be accomplished by anyone who is a DIYer with the skills. Depending on the severity of the problem the old caulking may require removal before a new layer of caulk can be applied. It is crucial to remember that when it is about uPVC window repairs you should not be tempted to apply too much caulk in order to make the area more difficult to clean and could reduce the efficiency of your energy.

It is important to check that the drainage holes are free of debris and that the sill pan is angled properly so that it drains away from the window. In more serious instances, you may need to think about replacing the window.

Other signs of long-term water leakage are sills that are rotten and the appearance of black spots of mold on the walls near the window. This mold thrives in damp environments and can quickly spread throughout the house.

If the leakage occurs between the double glazed window repairs-glazed glass, it is more likely the issue is more with the seal rather than the frame. Again this can easily be fixed by a uPVC window specialist who will replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be the reason if your uPVC window is difficult to open or it opens in a breeze. Anyone with the skills to fix them can replace these in a matter of minutes.

Like all mechanical parts, hinges can be damaged over time. It's easy to change the hinges on a window but it's much simpler if you have someone to help you to hold the frame.

Make sure that the uPVC hinges are closed and open in the right direction. Look for the arrows on each hinge to determine which way the window should be opened.

The issue can be caused by opening the window improperly or by a poor installation in the factory. It is usually possible to fix the issue by sending us a photograph on our website. We will be more than happy to give you suggestions.

It is also crucial to ensure that the hinges are lubricated on a regular basis. This can be done by applying a light engineering oil to the hinges. We recommend using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regular lubrication will make the window easier to open and close. It also decreases the possibility of a window repairs near me sticking and prevent corrosion. Ideally, you should perform this every year. WD40 and other solvent-based lubricants are not recommended as they will damage parts of your uPVC window.

5. Draughts

Draughts in windows made of upvc can be caused by different factors. The hinges, also because of wear and tear, can become misaligned, this will cause a gap to form where the sash meets the frame. This can be easily repaired by giving them a good cleaning, but if they are beyond repair it may be necessary to have them realigned or replaced. In addition, the interlock could also become misaligned. It is located on the hinge side and could require to be cleaned. In some cases, it may be necessary to replace these.

These seals can wear down or get damaged over time, allowing air to escape. Replacement of these with high-quality weatherstripping is a good way to stop draughts. Another alternative is to replace the upvc window with low-emissivity glass, which will help regulate indoor temperatures and will reduce the possibility of draughts.

Lastly, one of the most effective ways to cut down on drafts is to use an draught excluder. These are typically made of fabric that are filled with some sort of filler and can be positioned on the windowsill on top. They can help block out cold air and keep your home warm and cosy!

Your windows made of upvc will keep providing excellent insulation and security to your home by performing regular maintenance and repairs. However, it is important to recognize that all windows have a life span and eventually, they will reach a point where it is more economical to replace them than fix them. So, if you are experiencing issues with your Upvc windows, it's best to seek professional assistance immediately.